1 / 33

Simulating carbon, water and heat fluxes at the Changbaishan tower site using hourly BEPS

Simulating carbon, water and heat fluxes at the Changbaishan tower site using hourly BEPS. Wang Qiufeng, Yu Guirui. Institute of Geographic Sciences and Natural Resources Research Chinese Academy of Sciences. Outline. Introduction Materials and methods Overview of ChinaFLUX

diantha
Download Presentation

Simulating carbon, water and heat fluxes at the Changbaishan tower site using hourly BEPS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Simulating carbon, water and heat fluxes at the Changbaishan tower site using hourly BEPS Wang Qiufeng, Yu Guirui Institute of Geographic Sciences and Natural Resources Research Chinese Academy of Sciences

  2. Outline • Introduction • Materials and methods • Overview of ChinaFLUX • Site description of Changbaishan • Data collection and process • Model description • Preliminary Results • Conclusions

  3. Introduction • Carbon cycle and carbon cycle modeling are of great concerns in recent years • Eddy covariance technique provide a feasible way to model validation • The objective of this research is to validate NEP, LE, and Hs simulated by hourly BEPS with flux data of Changbaishan site from ChinaFLUX

  4. Materials and methods

  5. Overview of ChinaFLUX

  6. Changbaishan Site description 42°24′0 9″N , 128°05′45″E , elevation 738m Fetch: 500m-60km Height: 62.8 m

  7. Site description

  8. Open path/Closed Path EC

  9. Sensors of Routine Meteorological elements

  10. List of instruments

  11. Data collection • Flux data Sampling frequency 10Hz Half-hour fluxes are calculated on-line and collected by data logger (CR5000 Campbell, USA). • Meteorological and soil data are collected every 2 s and stored as half-hour statistics (CR23X, Campbell, USA)

  12. Data process • The 3-D Sonic anemometer tilt correction (coordinate rotation) was carried out monthly with the planar fit (PFT) method • Webb–Pearman–Leuning corrections (Webb et al., 1980) was applied to the eddy fluxes.

  13. Data process • Remove carbon flux data beyond the range -1.5<Fc<1.0 mg CO2 m-2 s-1 • Remove nighttime data with a friction velocity less than 0.2 m s-1 • Calculate NEP NEP= - NEE

  14. Model description

  15. Major vegetation parameters

  16. Preliminary Results

  17. Variations of Meteorological variables(in 2003)

  18. Soil temperature

  19. Soil moisture

  20. Statistical comparison of simulated versus measured soil temperatures and soil moistures

  21. Measured VS. Modelled NEP

  22. NEP simulated and measured for three periods during growing season

  23. simulated VS. measured LE

  24. LE simulated and measured for 3 periods during growing season

  25. Simulated VS. measured Hs

  26. a) b) c) Hs simulated and measured for 3 periods during growing season

  27. Sensitivity to climate variability

  28. Responses of NEP and ET to climate variability

  29. Sensitivity to physiological parameters

  30. Conclusions • The results simulated by hourly version BEPS is reasonable, which suggested that the model could be used to simulate the fluxes of C, water and heat flux in China • Results from sensitivity analysis showed that the model is sensitive to climate variability, meanwhile, plant physiological parameters (gmax and Vmax) are also important

  31. Conclusions • Although the model could capture the main patterns of the variations in NEP, LE and Hs, discrepancy still exists. The causes is still uncertain. • Much work still needs to be done in the future, such as model application in different types of ecosystems

  32. Acknowledgement • Thanks should be given to Prof. Chen J M for giving me the chance to study the BEPS model in UT and his useful advices • I am grateful to the kindly help provided by Dr. Ju W M in model debugging • I appreciate Prof. Shi XZ for providing the soil data

  33. Thank you!

More Related