1 / 7

Mousetrap Vehicle Design

Mousetrap Vehicle Design. By Jack Comsa. What it’s supposed to look like:. Supplies. 1 Mousetrap 4 Eye Hooks 4 CDs or DVDs 2 soda can openers that go on the top (From the 12oz Pepsi cans. Electrical Tape Fish wire Paper Clip Appliances: Drill Pliers Wood Piece. Components.

dick
Download Presentation

Mousetrap Vehicle Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Mousetrap Vehicle Design By Jack Comsa

  2. What it’s supposed to look like:

  3. Supplies • 1 Mousetrap • 4 Eye Hooks • 4 CDs or DVDs • 2 soda can openers that go on the top (From the 12oz Pepsi cans. • Electrical Tape • Fish wire • Paper Clip • Appliances: • Drill • Pliers • Wood Piece

  4. Components • Break System: Attach a small wood piece to the bottom, when pressure applied the wood piece will come down and stop the front two wheels. • Starting System. When the mouse trap snaps down, the force of the trap snaps, starting the mousetrap vehicle. • Wheels: The wheels will be CD’s and will go on the axels. They will roll once the mousetrap snaps. • Steering/ Speed Control: Weight will help the speed and steering by guiding it to the tracks. • Energy: The snap traps will give it an ultimate push.

  5. Test Plan • Once finished, I will test the vehicle on a flat surface, while putting down oppsticals to test all the systems, mainly the breaks.

More Related