1 / 35

EE 489 Telecommunication Systems Engineering University of Alberta

EE 489 Telecommunication Systems Engineering University of Alberta Dept. of Electrical and Computer Engineering Introduction to Traffic Theory Wayne Grover TR Labs and University of Alberta. A note on sources of this material.

didina
Download Presentation

EE 489 Telecommunication Systems Engineering University of Alberta

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. EE 489 Telecommunication Systems Engineering University of Alberta Dept. of Electrical and Computer Engineering Introduction to Traffic Theory Wayne Grover TRLabs and University of Alberta

  2. A note on sources of this material • The following material on traffic theory / traffic engineering was initially developed as printed handwritten notes from 1998 to 2001 by W. Grover for EE589. • In 2002 John Doucette set these materials into the present powerpoint format for use in EE589. • The ppt versions of the original notes, with updating and some revisions by W. Grover, 2007, are made available courtesy J. Doucette for use in EE489. • Related Reading in Bellamy 3rd Edition: • Chapter 12, pp. 519-567.

  3. Traffic Engineering • One billion+ terminals in voice network alone • Plus data, video, fax, finance, etc. • Imagine all users want service simultaneously • In practice, low overall utilization • Random duration at random times • Balance cost and practicality with acceptably low chance of network blocking. • We use traffic engineering to “dimension” the network, i.e. mainly to decide on how many transmission paths (trunks) are needed between node and the sizes of switches or routers needed.

  4. Group calling rate Per terminal calling rate Characterization of Circuit-Switched Traffic • Calling Rate () – also called Arrival Rate • Average number of calls or “connections” initiated per unit time (units. “attempts per hour”) • Each arrival independent of other calls • Random in time If receive  calls from a terminal in time T: If receive  calls from m terminals in time T:

  5. Characterization of Telephone Traffic (2) • Calling rate assumption: • Number of calls in time T is Poisson distributed:  Time between calls is negative exponentially distributed:

  6. Characterization of Telephone Traffic (3) • Holding Time (h) • Mean length of time a call lasts • Probability of lasting time t or more is exponential in nature: • Real sampled voice data fits very closely to the negative exponential form above • As non-voice “calls” begin to dominate, more and more calls have a constant holding time characteristic • Departure Rate ():

  7. Real Holding Time Sample Data

  8. Recall: Exponential Form of Holding Time • Memory-less property • Call “forgets” that it has already survived to time T1 Proof:

  9. Exponential Form of Holding Time • Understanding Memorylessness in Call holding times It means that: • whether a connection has already existed for 1 minute or one hour… • the probabiity that it will last another minute (or any other unit time)… • is the same. • Counterintuitive (?) but very accurate actually. • Can understand it (or any memoryless process) as being analogous to repeated coin tossing

  10. “c” “c” “s” Traffic Volume (V) • Units can be “ccs”: • Hundred call seconds  = # calls in time period T h = mean holding time V = volume of calls in time period T • 1 ccs is volume of traffic equal to: • one circuit busy for 100 seconds, or • two circuits busy for 50 seconds, or • 100 circuits busy for one second, etc.

  11. Recall: Recall: Recall: “Erlang” unit Traffic Intensity (A) • This is the rate of “traffic flow”.  = # calls in time period T h = mean holding time T = time period of observations  = # calls in time period T h = mean holding time T = time period of observations  = calling rate  = # calls in time period T h = mean holding time T = time period of observations  = calling rate  = departure rate  = # calls in time period T h = mean holding time T = time period of observations  = calling rate  = departure rate V = call volume • Units: • “ccs/hour”, or • dimensionless (if h and T are in the same units)

  12. The “Erlang” • Dimensionless unit of traffic intensity. Characterizes the intensity of any stream of demands for circuit-switched (or connection-oriented data) connections • Named after Danish mathematician A. K. Erlang (1878-1929) • Usually denoted by symbol E. • 1 Erlang is equivalent to the traffic intensity that keeps: • one circuit busy 100% of the time, or • two circuits busy 50% of the time, or • four circuits busy 25% of the time, etc. • e.g., 26 Erlangs is equivalent to traffic intensity that keeps : • 26 circuits busy 100% of the time, or • 52 circuits busy 50% of the time, or • 104 circuits busy 25% of the time, etc.

  13. Erlang (2) • How does the Erlang unit correspond to ccs? • Percentage of time a terminal is busy is equivalent to the traffic generated by that terminal in Erlangs, or • Average number of circuits in a group busy at any time • Typical usages: • residence phone -> 0.02 E • business phone -> 0.15 E • interoffice trunk -> 0.70 E

  14. 1 1 each terminal has an outgoing trunk (i.e. terminal:trunk ratio = 1:1) 150 150 Traffic Offered, Carried, and Lost • Offered Traffic (TO ) equivalent to Traffic Intensity (A) • Takes into account all attempted calls, whether blocked or not, and uses their expected holding times • Also Carried Traffic (TC ) and Lost Traffic (TL ) • Consider a group of 150 terminals, each with 10% utilization (or in other words, 0.1 E per source) and dedicated service: TO = A = 150 x 0.10 E = 15.0 E TC = 150 x 0.10 E = 15.0 E TL = 0 E

  15. Lost Traffic Traffic Intensity Carried Traffic Offered Traffic Traffic Offered, Carried, and Lost (2) • A = TO = TC + TL • TL = TO x Prob. Blocking (or congestion) = P(B) x TO = P(B) x A • Circuit Utilization () - also called Circuit Efficiency • proportion of time a circuit is busy, or • average proportion of time each circuit in a group is busy

  16. Example #1 • Traffic Engineered solution for the 150 terminals at 0.1 E ...

  17. Grade of Service (gos) • In general, the term used for some traffic design objective • Indicative of customer satisfaction • In systems where blocked calls are cleared, usually use: • Typical gos objectives: • in busy hour, range from 0.2% to 5% for local calls, however • generally no more that 1% • long distance calls often slightly higher • In systems with queuing, gos often defined as the probability of delay exceeding a specific length of time

  18. Grade of Service Related Terms • Busy Hour • One hour period during which traffic volume or call attempts is the highest overall during any given time period • Peak (or Daily) Busy Hour • Busy hour for each day, usually varies from day to day • Busy Season • 3 months (not consecutive) with highest average daily busy hour • High Day Busy Hour (HDBH) • One hour period during busy season with the highest load

  19. Hourly Traffic Variations

  20. Daily Traffic Variations

  21. Seasonal Traffic Variations

  22. Seasonal Traffic Variations (2)

  23. ABSBH Highest Note: Red indicates daily busy hour Grade of Service Related Terms (2) • Average Busy Season Busy Hour (ABSBH) • One hour period with highest average daily busy hour during the busy season • Average Busy Season Busy Hour (ABSBH) • One hour period with highest average daily busy hour during the busy season • For example, assume days shown below make up the busy season:

  24. 10HDBH Highest Grade of Service Related Terms (3) • Ten High Day Busy Hour (10HDBH) • One hour period with highest average load for the 10 highest day loads for that hour • Ten High Day Busy Hour (10HDBH) • One hour period with highest average load for the 10 highest day loads for that hour • For example: Note: Red indicates 10 highest hourly loads for each hour

  25. Grade of Service Related Terms (4) • Examples of grade-of-service type specification statements: • 1.5% of calls in ABSBH have dial tone delay more than 3 seconds • blocking on trunk groups < 3% • blocking through switch matrix < 0.1% • probability of packet delay > x msec less than 5% • probability of dropped connection in progress < 1% per minute • etc. • Note implications of designing to “busy hour” g.o.s. objectives: • simplifies design and forecasting problems • busy hour may change (unpredictably!) • the resulting network is “peak engineered” - same as the power network …may be greatly underutilized at off busy-hour times • Q. What could you do with this?

  26. Typical Call Attempts Breakdown • Calls Completed - 70.7% • Called Party No Answer - 12.7% • Called Party Busy - 10.1% • Call Abandoned - 2.6% • Dialing Error - 1.6% • Number Changed or Disconnected - 0.4% • Network Blockage or Failure - 1.9%

  27. Traffic Theoretic Models for Blocked Calls • Blocked Calls Cleared (BCC) • Blocked calls leave system and do not return • Good approximation for calls in 1st choice trunk group with overflow available. • Blocked Calls Held (BCH) • Blocked calls remain in the system for the amount of time it would have normally stayed for • If a server frees up, the call picks up in the middle and continues • Not a good model of real world behaviour (mathematical approximation only) • Tries to approximate call reattempt efforts • Blocked Calls Wait (BCW) • Blocked calls enter a queue until a server is available • When a server becomes available, the call’s holding time begins

  28. 10 minutes Traffic Carried 1 Blocked Calls Cleared (BCC) 2 sources Source #1 Offered Traffic 1 3 Total Traffic Offered: TO = 0.4 E + 0.3 E TO = 0.7 E Source #2 Offered Traffic 2 4 1st call arrives and is served Only one server 2nd call arrives but server already busy 1 2 3 4 2nd call is cleared 3rd call arrives and is served Total Traffic Carried: TC = 0.5 E 4th call arrives and is served

  29. 10 minutes Traffic Carried 1 2 Blocked Calls Held (BCH) 2 sources Source #1 Offered Traffic 1 3 Total Traffic Offered: TO = 0.4 E + 0.3 E TO = 0.7 E Source #2 Offered Traffic 2 4 1st call arrives and is served Only one server 2nd call arrives but server busy 2nd call is held until server free 1 2 3 4 2nd call is served 3rd call arrives and is served Total Traffic Carried: TC = 0.6 E 4th call arrives and is served

  30. 10 minutes Traffic Carried 1 2 Blocked Calls Wait (BCW) 2 sources Source #1 Offered Traffic 1 3 Total Traffic Offered: TO = 0.4 E + 0.3 E TO = 0.7 E Source #2 Offered Traffic 2 4 1st call arrives and is served Only one server 2nd call arrives but server busy 2nd call waits until server free 1 2 3 4 2nd call served 3rd call arrives, waits, and is served Total Traffic Carried: TC = 0.7 E 4th call arrives, waits, and is served

  31. Blocking Probabilities • System must be in a Steady State • Also called state of statistical equilibrium • Arrival Rate of new calls equals Departure Rate of disconnecting calls • Why? • If calls arrive faster that they depart? • If calls depart faster than they arrive?

  32. Binomial Distribution Model • Assumptions: • m sources • A Erlangs of offered traffic • per source: TO = A/m • probability that a specific source is busy: P(B) = A/m • Can use Binomial Distribution to give the probability that a certain number (k) of those m sources is busy:

  33. Binomial Distribution Model (2) • What does it mean if we only have N servers (N<m)? • We can have at most N busy sources at a time • What about the probability of blocking? • All N servers must be busy before we have blocking Remember:

  34. Binomial Distribution Model (3) • What does it mean if k>N? • Impossible to have more sources busy than servers to serve them • Doesn’t accurately represent reality • In reality, P(k>N) = 0 • In this model, we still assign P(k>N) = A/m • Acts as good model of real behaviour • Some people call back, some don’t • Which type of blocking model is the Binomial Distribution? • Blocked Calls Held (BCH)

  35. Time Congestion: Call Congestion: Probability that all servers are busy. Probability that there are more sources wanting service than there are servers. Time Congestions vs. Call Congestion • Time Congestion • Proportion of time a system is congested (all servers busy) • Probability of blocking from point of view of servers • Call Congestion • Probability that an arriving call is blocked • Probability of blocking from point of view of calls • Why/How are they different?

More Related