1 / 6

ISE 370 Project: Create a Machined Part Using the Computer Numerically Controlled ( CNC ) Machine

ISE 370 Project: Create a Machined Part Using the Computer Numerically Controlled ( CNC ) Machine. Mercer University School of Engineering Industrial Engineering Course Project David Harris (Industrial Engineering) Russell Hazelrig (Industrial Engineering) Chris Meador (Industrial Engineering).

dillon-chavez
Download Presentation

ISE 370 Project: Create a Machined Part Using the Computer Numerically Controlled ( CNC ) Machine

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ISE 370 Project: Create a Machined Part Using the Computer Numerically Controlled (CNC) Machine Mercer University School of Engineering Industrial Engineering Course Project David Harris (Industrial Engineering) Russell Hazelrig (Industrial Engineering) Chris Meador (Industrial Engineering)

  2. Develop design of part • Choose material (blue wax) • Draft dimensioned drawing in AutoCAD • Write program using G-code • Use Computer Numerically Controlled (CNC) Machine to manufacture part • Use Coordinate Measuring Machine (CMM) to check part quality Project Goal and Solution Department of Industrial Engineering and Industrial Management

  3. Dimensioned Drawing Department of Industrial Engineering and Industrial Management

  4. N1 07778 CROSS • N2 M6 T5 • N3 G0 G90 S1500 M3 E1 X0 Y0 • N4 H5 Z1.0 D5 • N5G41 X1.2094 Y-0.2969 • N6 G1 Z-0.5 F20 • N7 G1 X1.7906 Y-0.2969 • N8 G3 X1.7906 Y-1.2749 R+1.2456 • N9G3 X1.2597 Y-0.9780 R+1.4872 • N10 G1 X1.4523 Y-1.1551 • N11 G1 X1.2597 Y-1.3311 • N12 G3 X0.5812 Y-1.3311 R+1.4872 • N13 G3 X0.5812 Y-2.9062 R+3.1470 • N14 G1 X0.0 Y-2.9062 Partial Code for CNC Production of Cross Department of Industrial Engineering and Industrial Management

  5. Verify Dimensions Using CMM Machine Department of Industrial Engineering and Industrial Management

  6. Contact Information Acknowledgements • Dr. Joan Burtner, Chair • Recruitment and Retention Committee • Email: Burtner_J@Mercer.edu Mercer University School of Engineering 1400 Coleman Avenue Macon, GA • Phone: (478) 301- 4127 • Mr. Bill Campbell • Engineering Lab Supervisor • Mercer University School of Engineering • 1400 Coleman Avenue Macon, GA Final Machined Part – The Cross Department of Industrial Engineering and Industrial Management

More Related