Chapter 5

1. Chapter 5 Large and Fast: Exploiting Memory Hierarchy

2. Memory Technology §5.1 Introduction • Static RAM (SRAM) • 0.5ns – 2.5ns, $2000 – $5000 per GB • Dynamic RAM (DRAM) • 50ns – 70ns, $20 – $75 per GB • Magnetic disk • 5ms – 20ms, $0.20 – $2 per GB • Ideal memory • Access time of SRAM • Capacity and cost/GB of disk Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 2

3. Principle of Locality • Programs access a small proportion of their address space at any time • Temporal locality • Items accessed recently are likely to be accessed again soon • e.g., instructions in a loop, induction variables • Spatial locality • Items near those accessed recently are likely to be accessed soon • E.g., sequential instruction access, array data Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 3

4. Taking Advantage of Locality • Memory hierarchy • Store everything on disk • Copy recently accessed (and nearby) items from disk to smaller DRAM memory • Main memory • Copy more recently accessed (and nearby) items from DRAM to smaller SRAM memory • Cache memory attached to CPU Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 4

5. Memory Hierarchy Levels • Block (aka line): unit of copying • May be multiple words • If accessed data is present in upper level • Hit: access satisfied by upper level • Hit ratio: hits/accesses • If accessed data is absent • Miss: block copied from lower level • Time taken: miss penalty • Miss ratio: misses/accesses= 1 – hit ratio • Then accessed data supplied from upper level Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 5

6. Cache Memory • Cache memory • The level of the memory hierarchy closest to the CPU • Given accesses X1, …, Xn–1, Xn §5.2 The Basics of Caches • How do we know if the data is present? • Where do we look? Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 6

7. Direct Mapped Cache • Location determined by address • Direct mapped: only one choice • (Block address) modulo (#Blocks in cache) • #Blocks is a power of 2 • Use low-order address bits Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 7

8. Tags and Valid Bits • How do we know which particular block is stored in a cache location? • Store block address as well as the data • Actually, only need the high-order bits • Called the tag • What if there is no data in a location? • Valid bit: 1 = present, 0 = not present • Initially 0 Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 8

9. Cache Example • 8-blocks, 1 word/block, direct mapped • Initial state Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 9

10. Cache Example Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 10

11. Cache Example Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 11

12. Cache Example Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 12

13. Cache Example Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 13

14. Cache Example Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 14

15. Address Subdivision Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 15

16. 31 10 9 4 3 0 Tag Index Offset 22 bits 6 bits 4 bits Example: Larger Block Size • 64 blocks, 16 bytes/block • To what block number does address 1200 map? • Block address = 1200/16 = 75 • Block number = 75 modulo 64 = 11 Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 16

17. Block Size Considerations • Larger blocks should reduce miss rate • Due to spatial locality • But in a fixed-sized cache • Larger blocks  fewer of them • More competition  increased miss rate • Larger blocks  pollution • Larger miss penalty • Can override benefit of reduced miss rate • Early restart and critical-word-first can help Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 17

18. Cache Misses • On cache hit, CPU proceeds normally • On cache miss • Stall the CPU pipeline • Fetch block from next level of hierarchy • Instruction cache miss • Restart instruction fetch • Data cache miss • Complete data access Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 18

19. Write-Through • On data-write hit, could just update the block in cache • But then cache and memory would be inconsistent • Write through: also update memory • But makes writes take longer • e.g., if base CPI = 1, 10% of instructions are stores, write to memory takes 100 cycles • Effective CPI = 1 + 0.1×100 = 11 • Solution: write buffer • Holds data waiting to be written to memory • CPU continues immediately • Only stalls on write if write buffer is already full Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 19

20. Write-Back • Alternative: On data-write hit, just update the block in cache • Keep track of whether each block is dirty • When a dirty block is replaced • Write it back to memory • Can use a write buffer to allow replacing block to be read first Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 20

21. Write Allocation • What should happen on a write miss? • Alternatives for write-through • Allocate on miss: fetch the block • Write around: don’t fetch the block • Since programs often write a whole block before reading it (e.g., initialization) • For write-back • Usually fetch the block Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 21

22. Example: Intrinsity FastMATH • Embedded MIPS processor • 12-stage pipeline • Instruction and data access on each cycle • Split cache: separate I-cache and D-cache • Each 16KB: 256 blocks × 16 words/block • D-cache: write-through or write-back • SPEC2000 miss rates • I-cache: 0.4% • D-cache: 11.4% • Weighted average: 3.2% Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 22

23. Example: Intrinsity FastMATH Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 23

24. Main Memory Supporting Caches • Use DRAMs for main memory • Fixed width (e.g., 1 word) • Connected by fixed-width clocked bus • Bus clock is typically slower than CPU clock • Example cache block read • 1 bus cycle for address transfer • 15 bus cycles per DRAM access • 1 bus cycle per data transfer • For 4-word block, 1-word-wide DRAM • Miss penalty = 1 + 4×15 + 4×1 = 65 bus cycles • Bandwidth = 16 bytes / 65 cycles = 0.25 B/cycle Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 24

25. Increasing Memory Bandwidth • 4-word wide memory • Miss penalty = 1 + 15 + 1 = 17 bus cycles • Bandwidth = 16 bytes / 17 cycles = 0.94 B/cycle • 4-bank interleaved memory • Miss penalty = 1 + 15 + 4×1 = 20 bus cycles • Bandwidth = 16 bytes / 20 cycles = 0.8 B/cycle Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 25

26. Advanced DRAM Organization • Bits in a DRAM are organized as a rectangular array • DRAM accesses an entire row • Burst mode: supply successive words from a row with reduced latency • Double data rate (DDR) DRAM • Transfer on rising and falling clock edges • Quad data rate (QDR) DRAM • Separate DDR inputs and outputs Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 26

27. DRAM Generations Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 27

28. Measuring Cache Performance • Components of CPU time • Program execution cycles • Includes cache hit time • Memory stall cycles • Mainly from cache misses • With simplifying assumptions: §5.3 Measuring and Improving Cache Performance Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 28

29. Cache Performance Example • Given • I-cache miss rate = 2% • D-cache miss rate = 4% • Miss penalty = 100 cycles • Base CPI (ideal cache) = 2 • Load & stores are 36% of instructions • Miss cycles per instruction • I-cache: 0.02 × 100 = 2 • D-cache: 0.36 × 0.04 × 100 = 1.44 • Actual CPI = 2 + 2 + 1.44 = 5.44 • Ideal CPU is 5.44/2 =2.72 times faster Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 29

30. Average Access Time • Hit time is also important for performance • Average memory access time (AMAT) • AMAT = Hit time + Miss rate × Miss penalty • Example • CPU with 1ns clock, hit time = 1 cycle, miss penalty = 20 cycles, I-cache miss rate = 5% • AMAT = 1 + 0.05 × 20 = 2ns • 2 cycles per instruction Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 30

31. Performance Summary • When CPU performance increased • Miss penalty becomes more significant • Decreasing base CPI • Greater proportion of time spent on memory stalls • Increasing clock rate • Memory stalls account for more CPU cycles • Can’t neglect cache behavior when evaluating system performance Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 31

32. Associative Caches • Fully associative • Allow a given block to go in any cache entry • Requires all entries to be searched at once • Comparator per entry (expensive) • n-way set associative • Each set contains n entries • Block number determines which set • (Block number) modulo (#Sets in cache) • Search all entries in a given set at once • n comparators (less expensive) Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 32

33. Associative Cache Example Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 33

34. Spectrum of Associativity • For a cache with 8 entries Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 34

35. Associativity Example • Compare 4-block caches • Direct mapped, 2-way set associative,fully associative • Block access sequence: 0, 8, 0, 6, 8 • Direct mapped Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 35

36. Associativity Example • 2-way set associative • Fully associative Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 36

37. How Much Associativity • Increased associativity decreases miss rate • But with diminishing returns • Simulation of a system with 64KBD-cache, 16-word blocks, SPEC2000 • 1-way: 10.3% • 2-way: 8.6% • 4-way: 8.3% • 8-way: 8.1% Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 37

38. Set Associative Cache Organization Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 38

39. Replacement Policy • Direct mapped: no choice • Set associative • Prefer non-valid entry, if there is one • Otherwise, choose among entries in the set • Least-recently used (LRU) • Choose the one unused for the longest time • Simple for 2-way, manageable for 4-way, too hard beyond that • Random • Gives approximately the same performance as LRU for high associativity Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 39

40. Multilevel Caches • Primary cache attached to CPU • Small, but fast • Level-2 cache services misses from primary cache • Larger, slower, but still faster than main memory • Main memory services L-2 cache misses • Some high-end systems include L-3 cache Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 40

41. Multilevel Cache Example • Given • CPU base CPI = 1, clock rate = 4GHz • Miss rate/instruction = 2% • Main memory access time = 100ns • With just primary cache • Miss penalty = 100ns/0.25ns = 400 cycles • Effective CPI = 1 + 0.02 × 400 = 9 Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 41

42. Example (cont.) • Now add L-2 cache • Access time = 5ns • Global miss rate to main memory = 0.5% • Primary miss with L-2 hit • Penalty = 5ns/0.25ns = 20 cycles • Primary miss with L-2 miss • Extra penalty = 500 cycles • CPI = 1 + 0.02 × 20 + 0.005 × 400 = 3.4 • Performance ratio = 9/3.4 = 2.6 Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 42

43. Multilevel Cache Considerations • Primary cache • Focus on minimal hit time • L-2 cache • Focus on low miss rate to avoid main memory access • Hit time has less overall impact • Results • L-1 cache usually smaller than a single cache • L-1 block size smaller than L-2 block size Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 43

44. Interactions with Advanced CPUs • Out-of-order CPUs can execute instructions during cache miss • Pending store stays in load/store unit • Dependent instructions wait in reservation stations • Independent instructions continue • Effect of miss depends on program data flow • Much harder to analyse • Use system simulation Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 44

45. Interactions with Software • Misses depend on memory access patterns • Algorithm behavior • Compiler optimization for memory access Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 45

46. Virtual Memory §5.4 Virtual Memory • Use main memory as a “cache” for secondary (disk) storage • Managed jointly by CPU hardware and the operating system (OS) • Programs share main memory • Each gets a private virtual address space holding its frequently used code and data • Protected from other programs • CPU and OS translate virtual addresses to physical addresses • VM “block” is called a page • VM translation “miss” is called a page fault Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 46

47. Address Translation • Fixed-size pages (e.g., 4K) Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 47

48. Page Fault Penalty • On page fault, the page must be fetched from disk • Takes millions of clock cycles • Handled by OS code • Try to minimize page fault rate • Fully associative placement • Smart replacement algorithms Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 48

49. Page Tables • Stores placement information • Array of page table entries, indexed by virtual page number • Page table register in CPU points to page table in physical memory • If page is present in memory • PTE stores the physical page number • Plus other status bits (referenced, dirty, …) • If page is not present • PTE can refer to location in swap space on disk Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 49

50. Translation Using a Page Table Chapter 5 — Large and Fast: Exploiting Memory Hierarchy — 50