1 / 15

Humidity Sensing Fan Controller

Humidity Sensing Fan Controller. Jason Huft 05/11/10. General System Specifications. MCU: HC9S08QE32, 44 pin package Bus Frequency: approximately 8 MHz Internal clock source. Timeslice Kernel Timeslice Period:50 ms Memory Available: 32k EEPROM 2k RAM Memory Requirement:

dinah
Download Presentation

Humidity Sensing Fan Controller

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Humidity Sensing Fan Controller Jason Huft 05/11/10

  2. General System Specifications • MCU: HC9S08QE32, 44 pin package • Bus Frequency: approximately 8 MHz Internal clock source. • Timeslice Kernel • Timeslice Period:50 ms • Memory Available: • 32k EEPROM • 2k RAM • Memory Requirement: • Less than 1k EEProm • 2k RAM

  3. Timeslice Kernel Tasks • Startup Task • Push-Button Task • Display Task • Humidity Detect Task • Fan Control Task • Timing Task • WaitForSlice

  4. Start Task • Sets initial state of the system and initializes the registers. • Execution Time: • 100ms worst case. • Period: • Once at Startup

  5. Push-Button Task • Waits and recognizes a key press on a push-button switch. De-bounces the switch. • Period: 20ms (sporatic) • Execution Time: 10μs • Changes state from key press • Off • On (can recognize multiple presses of this key) • Automatic

  6. Humidity Detect Task • Observes changing voltage from the sensor • Converts the voltage into digital information • Passes voltage level as a hex output to the MCU. • Period 100ms • Execution Time 5μs

  7. Display Task • Writes information to LCD display • Takes timing information from timer task • Also reports current state if in On or Automatic State. • Period: 100ms • Execution Time: about 5ms.

  8. Fan Control Task • Interrupts information from the Humidity Detect Task to choose if the fan should be on/off in automatic state. • Calls fan activated/deactivate based on state. • Period: 20ms (sporadic) • Execution Time: 20us max (10 us average)

  9. Timing Task • Keeps track of remaining time in the on state. • Mostly internal clock. Receives information from Push-Button Task • Changes system state if certain conditions are met. • Period: 100ms • Execution Time: 20us or so

  10. Wait for Slice • Fills the remaining time in each slice period. • Included to assist in proper task timing and debugging. • Period: 100ms • Execution Time: Varies based on how many other tasks need to execute in one slice period.

  11. Modules

  12. CPU Load • Max CPU Load • 20us/100ms + 20us/20ms + 5ms/20ms + 10us/20ms + 5us/100ms = .05175 * 100 = 25.175% Max CPU load - 20us/100ms + 5ms/100ms + 10us/20ms + 5us/100ms = 5.12% average CPU Load

  13. Main Dataflow Diagram

  14. Dataflow Diagram: Continued

  15. AtD Converter Dataflow Diagram Humidity Detect Task A\D Converter A-to–D I/O pin Ts = 100ms ADCCFG AtDInit() AD0 ADP0 ADCSC1 HumidityRead() HumidityLevel

More Related