120 likes | 322 Views
DKTCOMEGA 796xx series FTU. Jesper Broszka, Product Manager. Introduction. Built upon the strong DKTCOMEGA CPE/gateway 79xxx product line, this is a new series of gateways that offers true triple-play services to the premises Modular architecture, introducing a suite of variants
E N D
DKTCOMEGA 796xx series FTU Jesper Broszka, Product Manager
Introduction • Built upon the strong DKTCOMEGA CPE/gateway 79xxx product line, this is a new series of gateways that offers true triple-play services to the premises • Modular architecture, introducing a suite of variants • 79601 – 4x 10/100/1000 Base-T LAN with 100/1000 Base-Bx WAN uplink • 79602 – 4x 10/100/1000 Base-T LAN with SFP cage • 79603 – 4x 10/100/1000 Base-T LAN with 100/1000 Base-Bx WAN uplink + 2x VoIP FXS • 79604 – 4x 10/100/1000 Base-T LAN with SFP uplink + 2x VoIP FXS • 79611 – 8x 10/100/1000 Base-T LAN with 100/1000 Base-Bx WAN uplink • 79612 – 8x 10/100/1000 Base-T LAN with SFP uplink • 79613 – 8x 10/100/1000 Base-T LAN with 100/1000 Base-Bx WAN uplink + 2x VoIP FXS • 79614 – 8x 10/100/1000 Base-T LAN with SFP uplink + 2x VoIP FXS • 79615 – 7x 10/100/1000 Base-T LAN with 100/1000 Base-Bx WAN uplink + 2x VoIP FXS + wifi • 79616 – 7x 10/100/1000 Base-T LAN with SFP uplink + 2x VoIP FXS + wifi
High-level Block Diagram – 4 port unit optional RAM Blackfin CPU System bus Ethernet VoIP / ATA Flash Marvell Switch ATA/SLIC SFP cage 1x SFP cage or 1x Bi-di 100/1000 Mbps WAN 4x RJ-45 10/100/1000 Mbps LAN 2x RJ-11 ATA
High-level Block Diagram – 7 port unit optional RAM Blackfin CPU System bus Ethernet Wifi VoIP / ATA Flash Marvell Switch stacking Marvell Switch Marvell Switch ATA/SLIC SFP cage 1x SFP cage or 1x Bi-di 100/1000 Mbps WAN 7x RJ-45 10/100/1000 Mbps LAN 2x RJ-11 ATA
Selectable WAN port type SFP cage • Operators can design whether WAN port shouldbe SFP type or a fixedtransceiverbased unit • Both types in same unit is not possible • 100 Base-BX-U / 1000 Base-BX-U (auto sense) • Single mode bi-directional • Optical Connector: SC/PC • Rx: 1490/1550 nm • Tx: 1310 nm • SFP single cage (module to beorderedseparately) • OAM • IEEE 802.3ah, Discovery, Link Monitoring, Remote FailureIndication, Remote Loopback • 802.1ag Ethernet ConnectivyFault Management
Switching features Marvell Switch • Layer 2 wire speed packet switching with support for VLAN • IEEE 802.1Q VLANs (4k VLANs) incl Q-in-Q • IEEE 802.1Q tag insertion and stripping • Port basedVLANs • Port mirroring of ingress/egress traffic • DHCP relay/option 82 • 4k MAC address database • Ingress and egress rate limiting • 10k jumbo frames support • QoS • IEEE 802.1p prioritization and reclassification • 4 QoS queues per port • Prioritization based on DSCP/ToS • IGMP v1/2/3 snooping
Management functionality Blackfin CPU • Provisioning via DHCP/TFTP or TR-069 • 1 MAC/IP address for Switch/ATA • 1 MAC/IP address for Wifi • Configuration file for switch, VoIP and wifi parts respectively, allowing multiple operators to enableindividual services • Linux based OS, controlling • Switch(es) setup, VoIPencoding/decoding and Wifisetup • IGMP snooping • DHCP relay/option 82 • SNMP • Web GUI for VoIP (for internalevaluation purposes only)
Wifi functionality Wifi • Optionalmodule • Internal antenna • IEEE 802.11b/g/n • Modulation: • IEEE 802.11b: CCK, DQPSK, DBPSK • IEEE 802.11g: OFDM • IEEE 802.11g/n: 64-QAM, 16-QAM, QPSK, BPSK • Security: • 64/128-bits WEP, WPA, WPA2, WPS • Support for 4 SSID • Support for 1 VLAN per SSID
VoIP functionality ATA/SLIC • Optional funtionality • 2x RJ-11 VoIP ATA, 4 VoIP accounts • SIPv2 - Session Initiation Protocol (RFC 3261, 3264) • SDP - Session Description Protocol (RFC 2327) • RTP - Real-Time Protocol (RFC 3500, 3551) • RTCP - Real-Time Control Protocol (RFC 1889) • RFC 2833 AVT Tones for SIP/RTP • G.711 a-law and μ-law 64kbps • G.729 8kbps • G.726 16/24/32/40kbps • Fax: T.38
VoIP functionality (cont’d) ATA/SLIC • Voice Activity Detection (VAD) • Silence Suppression (DTX) • Comfort Noise Generation (CNG) • Packet Loss Concealment (PLC) • Dynamic Jitter Buffer (Adaptive) • Caller ID • Call transfer • Call forwarding • Call waiting • Call hold • Message waiting • 3-way conferencing call
Physical Parameters • Plastic housing, external power adapter 230V/5V 2A • Dimensions (H x D x W): 44 x 104 x 144 mm • Curved cover with operator logo printing as an option • DIN Rack mounting • 19” Rack mounting, requires a mounting kit • Operating temperature: 0ºC to 40ºC • Max operating humidity: 80% RH (non-condensing) • Storage temperature: -20ºC to 70ºC • Max storage humidity: 95% RH (non-condensing)
For more information www.dktcomega.com