530 likes | 543 Views
This lecture by Professor Don Figer aims to review the path of X-ray photons, describe X-ray detection methods, discuss specific X-ray telescopes, and provide examples of X-ray objects. Topics covered include atmospheric absorption of X-rays, imaging techniques to increase photon count, coded aperture masks, and the use of grazing incidence for X-ray mirrors. The lecture also explores the history of X-ray detection and the ideal characteristics of a satellite-borne X-ray detector.
E N D
Astronomical Observational Techniques and Instrumentation Professor Don Figer X-ray Astronomy
Aims of Lecture • review x-ray photon path • describe x-ray detection • describe specific x-ray telescopes • give examples of x-ray objects
Atmospheric Absorption • X Rays are absorbed by Earth’s atmosphere • lucky for us!!! • X-ray photon passing through atmosphere encounters as many atoms as in 5-meter (16 ft) thick wall of concrete!
How Can X Rays Be “Imaged”? • X Rays are too energetic to be reflected “back”, as is possible for lower-energy photons, e.g., visible light X Rays Visible Light
X Rays (and Gamma Rays “”) Can be “Absorbed” • By dense material, e.g., lead (Pb) Sensor
Imaging System Based on Selective Transmission Input Object (Radioactive Thyroid) Lead Sheet with Pinhole “Noisy” Output Image (because of small number of detected photons)
How to “Add” More Photons1. Make Pinhole Larger “Fuzzy” Image Input Object (Radioactive Thyroid w/ “Hot” and “Cold” Spots) “Noisy” Output Image (because of small number of detected photons) “Fuzzy” Image Through Large Pinhole (but less noise)
How to “Add” More Photons2. Add More Pinholes • BUT: Images “Overlap”
How to “Add” More Photons2. Add More Pinholes • Process to combine “overlapping” images Before Postprocessing After Postprocessing
Coded Aperture Mask • A coded aperture mask can be used to make images by relating intensity distribution to the geometry of the system through post-processing, as described in the thyroid example. • Six coded aperture mask instruments are operational in space: XTE-ASM, HETE-WXM, SWIFT-BAT and the three instruments on INTEGRAL. • EXIST is being considered as a Black Hole Finder Probe in NASA's Beyond Einstein program.
Would Be Better to “Focus” X Rays • Could “Bring X Rays Together” from Different Points in Aperture • Collect More “Light” Increase Signal • Increases “Signal-to-Noise” Ratio • Produces Better Images
X Rays and Grazing Incidence X-Ray “Mirror” X Ray at “Grazing Incidence is “Deviated” by Angle (which is SMALL!)
Why Grazing Incidence? • X-Ray photons at “normal” or “near-normal” incidence (photon path perpendicular to mirror, as already shown) would be transmitted (or possibly absorbed) rather than reflected. • At near-parallel incidence, X Rays “skip” off mirror surface (like stones skipping across water surface)
X-ray Collecting Mirrors n.b., Distance from Front End to Sensor is LONG due to Grazing Incidence
X-Ray Mirrors • Each grazing-incidence mirror shell has only a very small collecting area exposed to sky • Looks like “Ring” Mirror (“annulus”) to X Rays! • Add more shells to increase collecting area: create a nest of shells “End” View of X-Ray Mirror
X-Ray Mirrors • Add more shells to increase collecting area • Chandra has 4 rings (instead of 6 as proposed) • Collecting area of rings is MUCH smaller than for a Full-Aperture “Lens”! Nest of “Rings” Full Aperture
History • Earliest experiments were done with Wernher von Braun’s V2 death rockets from WWII. • In 1948, x-rays were discovered using these rockets. The total power was found to be ~10-7 L€. • In 1962, Rossi & Giacconi et al. attempted to detect x-rays from objects outside of the solar system, finding Sco X-1. • Surprisingly, they found that Sco X-1 was emitting Px~103 LSco X-1. Sco X-1 is an low mass x-ray binary. • An x-ray payload flew on Skylab. • More recent missions include ROSAT, ASCA, BeppoSAX (GRB afterglow). • Current major mission is Chandra.
The Perfect X-ray Detector • What would be the ideal detector for satellite-borne X-ray astronomy? It would possess: • high spatial resolution • a large useful area, • excellent temporal resolution • ability to handle large count rates • good energy resolution • unit quantum efficiency • large bandwidth • output would be stable on timescales of years • internal background of spurious signals would be negligibly low • immunity to damage by the in-orbit radiation environment • no consumables • simple design • longevity • low cost • low mass • low power • no moving parts • low output data rate • (and a partridge in a pear tree) • Such a detector does not exist!
X-ray Detectors • Principle measurements • flux • position • energy • time of arrival • Specific types of detectors • gas proportional counter: x-ray photoionizes gas and induces voltage spike in nearby wires • CCD: x-ray generates charge through absorption in silicon • microchannel plates: x-ray generates charge cascade through photoelectric effect • active pixel sensor (i.e. CMOS hybrid detector array): x-ray generates charge through absorption in silicon • single photon calorimeters: x-ray heats a resistive element an amount equal to the energy of the x-ray
X-ray Detector Materials • Light sensitive materials must be sensitive to x-ray energies (~1-100 keV) • must allow some penetration • must have enough absorption or photoionization • Good materials • gas • CZT (CdZnTe) • CdTe • silicon
X-ray Image of Fe55 Source • For precise measurements of conversion gain (e-/ADU) or Charge Transfer Efficiency (CTE), one often uses an Fe-55 X-ray source. • Fe55 emits K-alpha photons with energy of 5.9 KeV (80%) and K-beta photons with energy of 6.2 KeV (20%). Impacting silicon, these will free 1616 and 1778 electrons, respectively. Image of Fe55 x-rays obtained in the RIT Rochester Imaging Detector Lab (RIDL) with a silicon detector.
CCDs “Count” X-Ray photons • X-Ray events happen much less often • fewer available X rays • smaller collecting area of telescope • Each absorbed x-ray has much more energy • deposits more energy in CCD • generates many electrons • Each x-ray can be counted • attributes of individual photons are measured independently
Measured Attributes of Each X Ray • Position of Absorption [x,y] • Time when Absorption Occurred [t] • Amount of Energy Absorbed [E] • Four Pieces of Data per Absorption are Transmitted to Earth:
Why Transmit [x,y,t,E] Instead of Images? • Images have too much data! • up to 2 CCD images per second • 16 bits of data per pixel (216=65,536 gray levels) • image Size is 1024 1024 pixels • 16 10242 2 = 33.6 Mbps • too much to transmit to ground • “Event Lists” of [x,y,t,E] are compiled by on-board software and transmitted • reduces required data transmission rate
Image Creation • From event list of [x,y,t,E] • Count photons in each pixel during observation • 30,000-Second Observation (1/3 day), 10,000 CCD frames are obtained (one per 3 seconds) • hope each pixel contains ONLY 1 photon per image • Pairs of data for each event are plotted as coordinates • Number of Events with Different [x,y] “Image” • Number of Events with Different E “Spectrum” • Number of Events with Different E for each [x,y] “Color Cube”
Chandra Originally AXAF Advanced X-ray Astrophysics Facility http://chandra.nasa.gov/ Chandra in Earth orbit (artist’s conception)
Chandra Orbit • Deployed from Columbia, 23 July 1999 • Elliptical orbit • Apogee = 86,487 miles (139,188 km) • Perigee = 5,999 miles (9,655 km) • High above LEO Can’t be Serviced • Period is 63 h, 28 m, 43 s • Out of Earth’s Shadow for Long Periods • Longer Observations
Chandra Mirrors Assembled and Aligned by Kodak in Rochester “Rings”
Mirrors Integrated into spacecraft at TRW (NGST), Redondo Beach, CA(Note scale of telescope compared to workers)
X-Ray Objects • Solar System objects • single stars near main sequence • white dwarfs and cataclysmic variables • supernova remanants • magnetars • compact object binaries • black hole accretion disks • black hole binaries • galaxy clusters • active galactic nuclei
X-Ray Radiative Processes • free-free • inverse compton scattering • synchrotron • atomic • charge-exchange
Example of X-Ray Spectrum Gamma-Ray “Burster” GRB991216 Counts E http://chandra.harvard.edu/photo/cycle1/0596/index.html
Light Curve of “X-Ray Binary” • There are High Mass X-Ray Binaries (HMXBs) and LMXBs. • GX 301-2 is a pulsar in orbit (P=41 d) with a B1I star. • Matter from the star can fall on, and spin up, pulsar. • Maximum is at periastron (x-ray heating?). http://heasarc.gsfc.nasa.gov/docs/objects/binaries/gx301s2_lc.html
X-Rays from Sun • Sun emits x-ray flux far in excess of amount expected from blackbody radiation. • The source of x-ray flux is coronal heating produced by magnetic fields. • (First “coronal” lines were observed in the optical, attributed to “Coronium,” but later found to be due to FeXIV, implying 106 K!) This picture of the Sun comes from the Soft X-Ray Telescope on the Yohkoh spacecraft, orbiting about 630 kilometers above the Earth. NOTE: The Yohkoh solar observatory is currently offline. The image above was made in December, 2001.
X-Rays from Earth (taken by Chandra!) • The Earth’s atmosphere is seen to emit x-rays when solar wind particles accelerate around the Earth’s magnetic field lines. • The particles knock out inner electrons, inducing a cascade and x-ray emission.
X-Rays from The Moon (taken by Chandra!) • X-rays from the Sun are absorbed by the surface of the Moon. • Fluorescing oxygen, magnesium, aluminum, and silicon atoms emit more x-rays.
Higher Rotation Produces Stronger B-field and More X-Ray Flux in Stars