1 / 9

FIX Reboot and Select Proper Boot Device Error Using Diskpart

After restarting if you're seeing a black screen which says reboot and select proper boot device then pay attention here because this solution can fix the boot device error. To learn about more way to fix the issue you can visit Coupweb.

donnaramirez995
Download Presentation

FIX Reboot and Select Proper Boot Device Error Using Diskpart

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. FIX Reboot & Select Proper Boot Device Using DISKPART

  2. Facing the error again!!!

  3. CAUSE OF BOOT DEVICE ERROR The reason for the reboot and select proper boot device error could be that your primary partition is no longer set as active.

  4. Steps To Resolve The Boot Device Issue Using Diskpart Insert boot media

  5. Open Troubleshoot in system recovery options STEP 1

  6. In troubleshoot option, open advanced options & click command prompt STEP 2

  7. In the CMD, write DISKPART, hit Enter & follow: Type diskpart>>select disk 0>>type list partition>>select partition 1>>type active & hit enter>>restart STEP 3

  8. Still Facing The Reboot ERROR? Check out these 8 ways to fix the error reboot and select proper boot device windows on Coupweb.

  9. FOLLOW US ON:

More Related