1 / 27

Potentiostat

Team Members: Kyle Bloomer Josh Geiman Lucas Bennett. Potentiostat. Team Sponsor: Dr. Cindy Harnett Team Mentor: Dr. Andy Dozier. Harnett Lab. Dr. Harnett's laboratory needs 15 potentiostats for her microfluidics lab

dore
Download Presentation

Potentiostat

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Team Members: Kyle Bloomer Josh Geiman Lucas Bennett Potentiostat Team Sponsor: • Dr. Cindy Harnett Team Mentor: • Dr. Andy Dozier

  2. Harnett Lab • Dr. Harnett's laboratory needs 15 potentiostats for her microfluidics lab • Off the shelf potentiostats range in price from $5K to $10K, which is prohibitive for an instructional lab Commercial Potentiostat

  3. What is a Potentiostat? • A Potentiostat is an instrument that is used to characterize electrochemical reactions • Fuel cells – reacts liquid fuel and oxidizer to produce electricity • Gas generators – Uses electrolysis to generate gas • A potentiostat measures the voltage difference between a Working Electrode and a Reference Electrode • Three electrode configuration • Most commercial potentiostats provide a second mode of operation that measures the current flow between the Working and Counter Electrodes • This mode is known as a “galvanostat”

  4. History - Ardustat • A previous potentiostat was attempted by a project team using an open source design, the Ardustat • The Ardustat was a two electrode configuration • Ardustat electrical design was poorly documented, which caused the project team to have difficulty implementing it for the project • Software design was “spaghetti code”, and it had no documentation or comments for either the firmware or the application software • Hardware used was an Arduino processor board, with a prototype “daughter board” • The team was unable to meet the project goals

  5. Ardustat Hardware

  6. Ardustat GUI – Connect & Setup

  7. Ardustat GUI – Data Logging

  8. Ardustat Code Example • Show pictures of GUI or firmware code • Before Ben • After Ben

  9. Previous Project Diagram

  10. Previous Project Test Set

  11. Current Status • An MEng student has implemented the hardware using a PCB assembly, and gotten it to work • The existing code has been reverse engineered and documented/commented • BUT the Ardustat is a two electrode configuration, and the software GUI is very limited in its capabilities

  12. Research • We have found an open source, three electrode potentiostat, known as the “Cheapstat” • Cheapstat was developed by UC Santa Barbara to provide an affordable alternative to COTS potentiostats

  13. Cheapstat Features • Input parameters must be set through an onboard LCD and 5-way joystick • The display is very limited • LCD on the Cheapstat processor “box” • Provides multiple measurement modes • List the modes here

  14. Cheapstat Hardware Front Panel PCB Assembly JoyStick To Cell Electrodes

  15. Design Goals - Hardware • Design and implement a three electrode potentiostat, based on the Cheapstat • Three electrode design • Easier to use interfaces • GUI on a PC • No joystick • Ease of assembly and use by students, faculty, and staff • PCB assembly techniques • USB processor to PC interface • External power sources • Full documentation of hardware • Schematics • Simulation results • Assembly diagrams • List of Materials

  16. Design Goals - Software • Develop GUI and firmware using modern software engineering techniques • No spaghetti code • Comment all code • Provide a software library • Document all the application software and firmware • Installation notes • User’s Manual

  17. Project Goals - Other • Characterize electrical performance for a typical electrochemical device • Compare electrical measurements with the existing Ardustat • Two electrode vs. three electrode measurement differences

  18. System Diagram

  19. Major Components • Processor • Firmware • Display/Data Management System (DDMS) • GUI software • Power supply

  20. System Diagram

  21. Processor Requirements • Capture the test configuration • Measurements to be made, ranges, etc. • Execute the test using the measurements that have been established by the operator • Log and time stamp test results in NVRAM • Send measurement data to Display/Data Management System (DDMS) during test • When polled by the DDMS, send the test results in CSV format to a file on the PC

  22. System Diagram

  23. DDMS Requirements • Pre- test Mode • Calibrate instrument • Configure processor for the test to be executed • Test Mode • Execute test script that was entered during Pre-Test • Display results during test • Post Processing • Report generation

  24. System Diagram

  25. Voltage Converter • Three options are available: • Wall Wart • USB • Battery power • Microprocessor requires 5 VDC • Estimated 3 watts

  26. Current Status • Build and test Cheapstat using current design • CheapStat Parts have been ordered • Research ongoing regarding firmware development environment • Software development kit to preserve schedule • Test existing Ardustat • Need DUT – Chlorine Generator?

  27. Questions?

More Related