1 / 12

New Electric Fencing Concept: Enhanced Mechanical & Electrical Features for Efficient Installation

Explore the innovative changes in installing and configuring electric fences for improved security and durability. Benefit from savings in time and materials with this advanced system, including the use of twisted aluminum wire and ready-made profiles.

dorisv
Download Presentation

New Electric Fencing Concept: Enhanced Mechanical & Electrical Features for Efficient Installation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electric Fencing 2016 New Mechanical and Electricalconcept February 2016. 14-12-2015 Mathijs de Jong

  2. Content • Why a new concept? • Changes in installing of the profiles and wires: • Modulus Sleeves; • Twisted aluminum wire; • Corner/end/and other profiles (preassembleddelivered instead of self assembling); • Ready-made configuration wires instead ofself cutting and stripping. • Changes in the configuration: • No configuration clamps needed; • 17 wires instead of 16, etc.; • Grounding.

  3. Why a new concept • Advantages of the new mechanical concept: • Continues developing by supplier (Nemtek) which makes Heras market leader on technological level; • Possible simultaneous introduction of the latest generation energizer, Druid 25; • Better harmonization between between the electronic and mechanical concept of ElectricFence detection; • Possibility for Heras to use the knowhow and expertise of Topguard on these products;

  4. Changes in installing on the fence line • The most important changes are: • Modulus Sleeves: • Mechanical stronger; • Freely configurable; • Delivered completely assembledincluding mounting brackets (2x); • Increased sabotage protection. • Twisted aluminum wire: • Cheaper then current version; • Fits on the entire system, incl. tensioners; • Simple to use; • High corrosion resistance; • No bad influence on the connections due to corrosion.

  5. Changes in installing on the fence line • Corner/end/other profiles (ready- made instead of self assembling): • Time saving because sleeves are ready to use; • 6 different corner/end/other profiles: Begin post (tensioners) End post (without tensioners) 50m, 150m, ….tension post Inside corner Outside corner 100m, 200m, …. tension post

  6. Changes in installing on the fence line

  7. Changes in installing on the fence line Note:wrong picture, just one post is installed on a outside corner

  8. Changes to the configuration • No configurationclampsneeded: • Quick installing; • 3 different lenghts of pre strippedwires; • Connection with low resistancedue tooxidation; • Because the use of the samematerials, there is no galvaniccorrosion.

  9. Changes to the configuration • 17 wire system (266 cm high) • 8x High voltage loop; • 8x ground loop (or also high voltage); • “Super”ground /ground.

  10. Changes to the configuration • Grounding: • Every 50 meters; • 3 earth stakes; • Grounding the fence line; • Galvanic corrosion.

  11. Installation test Oirschot

  12. Questions?

More Related