1 / 6

TLK10232 hardware config

TLK10232 hardware config. a. PDTRXA : high PDTRXB : high ST/GPI1 : high MODE/RERCLK_SEL : Low PRBSEN : Low TESTEN : Low GPIO : Low MDIO_B2B_RLY : Low MDIO_CON_RLY : Low I2C_GPI)_ADDR : Low. Red : change config. h. g. f. e. d. c. b. a. b. AMUXB : Open AMUXA : Open

dorit
Download Presentation

TLK10232 hardware config

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TLK10232 hardware config a. PDTRXA : high PDTRXB : high ST/GPI1 : high MODE/RERCLK_SEL : Low PRBSEN : Low TESTEN : Low GPIO : Low MDIO_B2B_RLY : Low MDIO_CON_RLY : Low I2C_GPI)_ADDR : Low Red : change config h g f e d c b a b. AMUXB : Open AMUXA : Open PRBS PASS : Open LOSB : Short LOSA : Short c. GND : Open LX_OKINB : Open LX_OKINA : Open GND : Open d. PRTAD0 : short PRTAD1 : Low PRTAD2 : Low PRTAD3 : Low PRTAD4 : Low e. TCK: Open TSM : Open TDI : Open TDD : Open /TRST : Open f. h. INT2: Open RESET2: Open INT1: Open RESET1: Open SDA : Open SCL : Open g. MDC: Open INPUT: Open MDIO: Open MDC: Open OUTPUT : Open MDIC : Open

  2. TLK10232 ( HSTXBn pattern signal) Turn on TLK 10232 EVM (just supply voltage on EVM board )

  3. TLK10232 ( HSTXBnpattern signal) Loading your config

  4. TLK10232 ( pattern signal) Clock

  5. TLK10232 ( pattern signal) SFP+ eye pattern

  6. TLK10232 ( BER_Test) I can not check BER

More Related