1 / 23

Announcements

Announcements. Tuesday ’ s Lecture next week is cancelled October 18 th Assignment 4 is active, due in my mailbox by 5pm Friday (October 14 th ) Mid-term Thursday, October 27 th. Project Dates.

draco
Download Presentation

Announcements

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Announcements • Tuesday’s Lecture next week is cancelled • October 18th • Assignment 4 is active, due in my mailbox by 5pm Friday (October 14th) • Mid-term Thursday, October 27th

  2. Project Dates • Project Description - one paragraph, plus circuit diagrams and web links – email to me by Tuesday Nov 1st • Guidelines and a few useful links are here: http://www.physics.udel.edu/~jholder/Phys645/Lab/Projects.htm . There are many more sites if you search the web (e.g. google “hobby electronics”) • Kits are allowed, but circuits must be assembled on the prototyping board. $50 maximum budget. • Once approved, I will need a complete parts list, with digikey or radioshack catalog part numbers. I will place the orders, but FINDING THE CORRECT COMPONENTS AND GETTING THEM IN TIME IS YOUR RESPONSIBILITY!!! Note that most basic components (resistors, capacitors etc.) are available in the lab. • The project should (ideally) contain both analog and digital • You should work with your lab partner, but individual reports are required for the projects. • The project counts for 20% of your final grade (I grade them) • I will leave copies of some good past projects in the lab (please don’t take them away)

  3. Lecture 12 Overview • Op amp circuits • amplifiers • Adding/ Subtracting • Integrating Circuit • Differentiating Circuit • Active Filters

  4. Recap: Opamps • DC coupled, very high gain, differential amplifier. • Feed part of the output back into the inverting input to get stable operation in the linear amplification region • Golden rules under negative feedback: • The voltage at the inputs is the same (v+=v-) • No current flows into the opamp (i+=i-=0)

  5. Op amp circuit 2: Inverting Amplifier • Signal and feedback resistor, connected to inverting (-) input. • v+=v- connected to ground v+ grounded, so:

  6. Op amp circuit 3: Summing Amplifier • Same as previous, but add more voltage sources

  7. Summing Amplifier Applications • Adds signals from a number of waveforms • Applications - audio mixer • http://wiredworld.tripod.com/tronics/mixer.html • Can use unequal resistors to get a weighted sum • For example - could make a 4 bit binary - decimal converter • 4 inputs, each of which is +1V or zero • Using input resistors of 10k (ones), 5k (twos), 2.5k (fours) and 1.25k (eights)

  8. Op amp circuit 4: A non-inverting amplifier • Feedback resistor still to inverting input, but no voltage source on inverting input (note change of current flow) • Input voltage to non-inverting input

  9. Op amp circuit 5: Differential Amplifier (subtractor) • Useful terms: • if both inputs change together, this is a common-mode input change • if they change independently, this is a normal-mode change • A good differential amp has a high common-mode rejection ratio (CMMR)

  10. Differential Amplifier applications • Very useful if you have two inputs corrupted with the same noise • Subtract one from the other to remove noise, remainder is signal • Many Applications : e.g. an electrocardiagram measures the potential difference between two points on the body http://www.picotech.com/applications/ecg.html The AD624AD is an instrumentation amplifier - this is a high gain, dc coupled differential amplifier with a high input impedance and high CMRR (the chip actually contains a few opamps)

  11. Op-amp integrator

  12. Op-amp integrator

  13. Integrator Application: Ramp Generator V Integrator response to a constant voltage: VIN This is a ramp generator - very useful in timing circuits... t VOUT V • What's the integrator response to a square wave?

  14. Integrator Application: Ramp Generator V Integrator response to a constant voltage: VIN This is a ramp generator - very useful in timing circuits... t VOUT V • What's the integrator response to a square wave? VIN t • ...Useful for waveform generators: VOUT

  15. What does this do?

  16. Op-amp differentiator

  17. Differentiator • Differentiator response to a square wave?:

  18. Differentiator Application: edge detection VIN • Differentiator response to a square wave?: • The differentiator is good at detecting edges, or transitions - very useful in digital circuits. t VOUT N.B. Don't confuse the differentiator with a differential amplifier (subtractor)!

  19. Other "mathematical operator" circuits can be easily constructed: • Logarithm • Antilogarithm • Multiplier • Divider • Square root function

  20. What about complex impedances?

  21. Active low-pass filter Max Amplification: RF/RS Low pass factor: 1/(1+ jωRFCF) Cut-off frequency (-3dB = 1/√2) when ωRFCF=1, ie ω0=1/RFCF e.g. RF/RS=10; 1/RFCF=1

  22. Active high-pass filter Max Amplification: RF/RS High pass factor: 1/(1+ 1/jωRSCS) Cut-off frequency: ωRFCF=1 e.g. RF/RS=10; 1/RFCF=1

  23. Active band-pass filter Combine the two: • Advantages of active filters: • no inductors (large, pick-up) • buffered (high input impedance, low output impedance) • – so filter performance independent of source and load; can cascade filters

More Related