Mold and Mildew Removal from Shower in Alpharetta

1. Get Rid of Mold and Mildew Issues in Alpharetta Mold takes place in wet settings. First, it occurs in corners and then grows through the entire tile and grout. That’s the reason why it is commonly found within showers. The worst thing is, it cannot be found immediately and within months it will make your entire shower look unpleasant. Mold also causes health issues, such as runny nose, rash, eye irritation and wheezing. Bringing that incredible cleanliness to the floor and walls has become second nature to us with our astonishing tile and grout cleaning service in Alpharetta. We spray Imperia – an exquisitely engineered cleaner, to the entire tile and grout. It removes mold, mildew and stains at the top of the surface and then penetrates deep to eliminate this issue at the root. Imperia cleans, preps and sanitizes showers without degrading the quality of the tile and grout.

2. After we clean showers, we always apply a titanium coat to the grout with Caponi – an exclusive grout sealer designed by pFOkUS. Grout will stain again if it has not been sealed since it is very porous and accessible to mold very easily. Caponi waterproofs all the grout lines while soaking deep into them. It has more than 40 color options that will easily match your surface color. Caponi cannot be damaged by harsh chemicals or scrubbing. We eliminate the caulk and use Sentura instead of it. Caulking is for handymen since it is a cheap and easy process. But, it softens and comes out of the joints when exposed to moisture, causing mold to lurk in the corners. Sentura is a two part pigmented flexible solvent epoxy/resin, which is designed with a 1200psi adhesion that can never be damaged. It can be pigmented in over 40 colors to make the surface look natural. It protects the shower and bathtub corners for a lifetime with its sleek lines. If there is natural stone, such as marble, slate and travertine, it should always be sealed as it has pores that will open once it has been cleaned. We close the pores with Repela-Bond – an invisible clear resin water based sealer, or Celine – a clear topical solvent based sealer. Both sealants go into the stone while closing the pores and create a hydrophobic surface to prevent mold, mildew and stains. Repela-Bond doesn’t change the stone’s appearance, while Celine

3. may bring an extra sheen to the surface. Ceramic or porcelain tile should not be sealed as the seal can peel within months. We carry a 5 year labor warranty on our mold removal service in showers .