350 likes | 607 Views
SKM SOFTWARE. SKM Software is used for creating ARC Flash labels The current version is: (6.5.2.7 Build 2) An arc flash is an electric arc which can occur when there is sufficient voltage in an electrical system and a path to ground or lower voltage.
E N D
SKM SOFTWARE • SKM Software is used for creating ARC Flash labels • The current version is: (6.5.2.7 Build 2) • An arc flash is an electric arc which can occur when there is sufficient voltage in an electrical system and a path to ground or lower voltage. • An arc flash with 1000 amps or more can cause substantial damage, fire or injury. The massive energy released in the fault rapidly vaporizes the metal conductors involved, blasting molten metal and expanding plasma outward with extreme force.
PRINTING FROM SKM • BRADY TECH SUPPORT CAN ASSIST WITH: • SELECTING THE PROPER SIZE TEMPLATE • THE PRINT FUNCTION OF SKM SOFTWARE • CONFIGURING THE BRADY PRINT DRIVER • THE ONLY BRADYPRINTERS SUPPORTED ARE : • IP’s, PR+’s, GLOBALMARKS • BBP31 & MINIMARK ARE CURRENTLY NOT SUPPORTED FOR USE WITH SKM SOFTWARE
START BY CLICKING RUN ON THE TOOLBAR
SELECT ARC FLASH EVALUATION
THIS IS THE NEXT SCREEN YOU WILL SEE
CLICK ON CUSTOM LABEL
THIS IS THE NEXT SCREEN YOU WILL SEE
CLICK THE DROP DOWN LIST TO VIEW DIFFERENT LABEL TYPES
THT PART NUMBERS ARE FOR USE WITH THE IP & PR+ PRINTERS GLOBALMARK LABELS SHOW GLOBALMARK
YOU WILL SEE A PREVIEW OF YOUR SELECTED LABEL CLICK ON “DESIGNER”
USE THE DESIGNER SCREEN TO VERIFY PAGE SIZE, LABEL SIZE & ORIENTATION SIZE MUST MATCH THE INSTALLED LABEL CLICK “OK” AFTER SETUP IS COMPLETE
THE PRINT SCREEN NOW COMES UP CLICK THE DROP DOWN LIST TO SELECT THE BRADY PRINTER TO USE
ONCE THE PRINTER IS SELECTED CLICK THE PROPERTIES BUTTON
FOR THT PRINTERS PAPER SIZE = USER SENSOR TYPE = GAPPED GAP SPACE = 0.1 Inches PAPER WIDTH & HEIGHT SHOULD MATCH THE DIMENSIONS OF THE LABEL INSTALLED IN THE PRINTER
FOR THT PRINTERS TAPE TYPE = THERMAL TRANSFER PRINT SPEED = 2 INCH DENSITY = 0-10 PRINT MODE = TEAR OFF
FOR GLOBALMARK PRINTERS SELECT THE GLOBALMARK THEN CLICK ON PROPERTIES
FOR GLOBALMARK PRINTERS SET ORIENTATION TO LANDSCAPE IF ADVANCED TAB IS AT THE TOP = SELECT IT IF ADVANCED BUTTON IS AT BOTTOM= SELECT IT
FOR GLOBALMARK PRINTERS CLICK ON PAPER SIZE THEN CLICK ON PROPERTIES
FOR GLOBALMARK PRINTERS TAPE SIZE MUST MATCH WHATS INSTALLED IN THE PRINTER SET THE DOCUMENT LENGTH TO YOUR DESIRED LENGTH AFTER MAKING CHANGES, CLICK OK TO CLOSE OUT OF PROPERTIES
EXAMPLE OF A GLOBALMARK PART THIS HEADER WILL PRINT
EXAMPLE OF A THT PART WITH PRE-PRINTED HEADER PRE-PRINTED HEADER SHOWS UP HERE WHEN IT PRINTS
WE OFFER LIMITED SUPPORT OF SKM SOFTWARE • THE FOLLOWING KBASE ARTICLES ARE A GOOD RESOURCE FOR PROVIDING TO CUSTOMERS: • 4347 – PR300+ PRINTER • 3829 – THT PRINTERS • 3814 – BRADY PRINTERS • 3058 – GLOBALMARK PRINTERS • 4276 & 5017 – IP PRINTERS • FOR QUESTIONS ON SOFTWARE USAGE, CUSTOMERS CAN FIND SKM CONTACT INFORMATION USING THIS LINK: • http://www.skm.com/tech_support.shtml