1 / 36

Fire Engine Maintenance

Fire Engine Maintenance. Unit 1B – Pump Inspections and Maintenance. Inspect a pump package and describe pump maintenance procedures as outlined in the FEMPR. Correctly enter all pump information in the FEMPR. Discuss winterization procedures as outlined in the FEMPR. Objectives.

dustinb
Download Presentation

Fire Engine Maintenance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Fire EngineMaintenance Unit 1B – Pump Inspections and Maintenance

  2. Inspect a pump package and describe pump maintenance procedures as outlined in the FEMPR. Correctly enter all pump information in the FEMPR. Discuss winterization procedures as outlined in the FEMPR. Objectives

  3. Conduct a pump performance test and record the results in the FEMPR. Troubleshoot and correct common problems with the pump and pump plumbing. Objectives

  4. Pump Package Inspection

  5. Pump Package

  6. Water Tank and Foam Tank

  7. Sight and Water Level Gauges

  8. Valves

  9. Coolant

  10. Oil

  11. Oil Check and Fill • Oil level is checked with the dipstick on the right side of the pump engine. • Oil is added at the fill cap located on the top of the pump engine next to the exhaust.

  12. Oil Drain • Oil drain is located at the bottom on the right side of the pump engine. • Drain is used to change oil. • Oil drain hose empties under the rear of the truck on the left side.

  13. Oil Filter • Oil filter is located next to the dipstick. • Filter should be changed when oil is changed.

  14. Fuel Filter

  15. Air Filter(s)

  16. Primer

  17. Switches, Glow Plugs, & Throttle

  18. Gauges Water Pressure Gauge Water Tank Level Master Gauge RPM Gauge Engine Temperature Gauge Oil Pressure Gauge

  19. Water Pressure Safety Shutdown Switch

  20. Live Reels

  21. Foam Proportioner

  22. Foam Proportioner

  23. Water Inline Strainer

  24. Pump Mounting Bolts

  25. Pump Exhaust

  26. Gear Box

  27. Pump Maintenance Requirements Basic Service Pump Seal Maintenance Annual Pump Motor Maintenance

  28. Winterization Field or short-term Full

  29. Pump Performance Test Guidelines Test done according to FEMPR or local standards Use same discharge port Document test results and identify trends

  30. Commercial Certified Flow Meter

  31. Non-Commercial Flow Meter

  32. Homemade Pressure/Flow Tester

  33. Troubleshooting • Pump engine • Other problems • The operator’s manual contains additional troubleshooting procedures. Experience will also enhance your troubleshooting skills.

  34. Pump Package Inspections Field winterizations

  35. Inspect a pump package and describe pump maintenance procedures as outlined in the FEMPR. Correctly enter all pump information in the FEMPR. Discuss winterization procedures as outlined in the FEMPR. Objectives

  36. Conduct a pump performance test and record the results in the FEMPR. Troubleshoot and correct common problems with the pump and pump plumbing. Objectives

More Related