1 / 10

Holding{

}Wood. Holding{. Suggested Methods. Holding a Bowl. Turning Exterior. Mount blank on a faceplate Mount blank on a screwchuck Mount blank on a pinchuck Mount blank on spigot jaws Mount blank on small gripper jaws Mount blank between centres. Holding a Bowl. Holding a Bowl.

dyani
Download Presentation

Holding{

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. }Wood Holding{ Suggested Methods

  2. Holding a Bowl Turning Exterior • Mount blank on a faceplate • Mount blank on a screwchuck • Mount blank on a pinchuck • Mount blank on spigot jaws • Mount blank on small gripper jaws • Mount blank between centres

  3. Holding a Bowl

  4. Holding a Bowl Turning Interior • Hold on faceplate • Hold in dovetail recess • Hold on dovetail spigot • Hold in jam chuck • Hold on glue chuck • Turn inside & outside on base spigot

  5. Holding a Bowl Remounting • Use two jaws on distorted spigot • Hold in temporary internal recess • Hold on soft pad between centres • Hold in button jaws • Hold on vacuum chuck • Hold in clamping jig

  6. Holding a Goblet • Hold square section in external jaws • Hold on dovetail spigot • Hold on parallel spigot with gripper jaws • Hold in split ring chuck • Hold in coil chuck • Mount on faceplate • Use goblet centre to support stem turning

  7. Holding a Box • Hold on a jam chuck • Hold on cylinder jaws • Hold on gripper jaws with masking tape • Hold on internal jaws • Use body of box as jam chuck

  8. Holding a Breadboard • Mount on faceplate • Hold in dovetail recess • Mount on glue chuck using 2-sided tape • Hold in button jaws • Hold on vacuum chuck

  9. Holding a Sphere • Hold between centres • Hold in a fruit chuck • Hold between bespoke conical centres • Hold in clamping jig • Hold on hot melt glue chuck • Hold in bespoke collet jaws • Hold on vacuum chuck

  10. End

More Related