1 / 28

Ceramics

Ceramics. Primary Clay Clay found at the original site where it was formed by decomposing rock Secondary Clay Clay that has been transported from its original site by water, air or ice and deposited in layers elsewhere. Earthenware.

edan-velazquez
Download Presentation

Ceramics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ceramics

  2. Primary Clay Clay found at the original site where it was formed by decomposing rock Secondary Clay Clay that has been transported from its original site by water, air or ice and deposited in layers elsewhere

  3. Earthenware Clay that hardens at a low temperature but remains porous (able to absorb moisture). Earthenware is a secondary clay. Porosity The capacity of a clay body to absorb moisture

  4. Preparing Clay Before making anything with clay, whether by hand or on the pottery wheel, the clay must be wedged so that it can survive the firing process. Pottery will explode in the kiln if air bubbles or impurities are in the clay or if certain areas are drier than others. In order to remove any air bubbles and evenly distribute water throughout the clay, it must be repetitively kneaded.

  5. Plasticity The quality of clay that allows it to be easily manipulated and still maintain its shape

  6. Leather hard The condition of unfired clay when most of the moisture has evaporated leaving it still soft enough to be carved into or joined to other pieces. Clay should be leather hard when building with slabs of clay

  7. Bone dry The condition of unfired clay when it is as dry as possible prior to firing

  8. Kneading Working clay on a surface with the palms of the hands in order to remove air from it and obtain a uniform consistency

  9. Clay Building Techniques Coil building Slab building

  10. Coil A rope-like roll of clay used in hand building

  11. Pinching Thumbs are pushed into the center, and then simple walls are created by pinching and turning the pot.

  12. Clay Modeling Tools Clockwise from bottom left: wood rib, sponge, ribbon tool, loop tool, needlepoint tool, wood modeling tool, wire clay cutter, steel rib

  13. Slurry/Slip • A creamy mixture of clay and water often used as a glue to bond two pieces of clay together Viscosity The property of a liquid to resist movement. (Water has a low viscosity while syrup has a high viscosity.) Slurry should have a viscosity similar to that of pudding to be used for gluing pieces of clay together.

  14. Rib A hand held tool made of hard material used for shaping ceramic pieces and compressing clay particles

  15. Kiln A furnace, built of refractory (resistant to heat and melting) material, for firing ceramic ware

  16. Firing The heating of clay or glaze to a specific temperature

  17. Greenware Unfired clay pieces

  18. Bisqueware Clay pieces which have been fired once and are unglazed

  19. Kilns and Firing Kilns are used to fire pottery Pottery is considered to be in the greenware stage until it is fired After its first firing, it is bisqueware Bisqueware can be covered with coats of glaze and fired again numerous times

  20. Warping Distortion of a clay shape cause by uneven stresses during shaping, drying or firing

  21. Cone Firing Pyrometric cones are devices that gauge heatwork (the combined effect of both time and temperature) when firing materials inside a kiln. Cones range from 022 (the coolest) to 42 (the hottest). Earthenware clay is fired around 1900 degrees Fahrenheit, or between cone 06 and cone 04.

  22. Cone Small, pyramid-shaped forms of ceramic materials made to bend and melt at specific temperatures and gauge the temperature of the kiln

  23. Glaze Techniques Glazes can be applied with any technique imaginable. The most common applications are painting, dipping, or spraying.

  24. Glaze A glass-like coating that is bonded to a surface through heat

  25. Vitreous Glass-like; hard, dense, and non-absorbent

  26. Glaze Firing A second kiln firing after the initial bisque firing in which glaze materials are heated sufficiently to melt and form a glass-like coating over ceramic pieces when cooled

  27. Bisqueware Earthenware Key Terms Greenware Leather hard Slurry pottery that has been fired but not yet glazed ceramic ware made of porous clay fired at low heat pottery that has not been fired stage in the drying process of clay where all shrinkage has occurred clay that has been saturated with water to create a thick liquid process of cutting grooves into a piece of clay where another scored piece will be attached method of de-airing and dispersing moisture uniformly by hand in a piece of clay devices that gauge heatwork (the combined effect of both time and temperature) when firing materials inside a kiln Scoring Kneading Cone

More Related