1 / 5

Black 0 0 Blue 20 0 Green 30 0 Red 45 0 Yellow 60 0

Black 0 0 Blue 20 0 Green 30 0 Red 45 0 Yellow 60 0. Woofer becoming directional. AR 303 would be worse. Not valid below 300Hz. Figure 1 AR 302 horizontal dispersion measured from drivers near edge of cabinet. Not valid below 300Hz.

edda
Download Presentation

Black 0 0 Blue 20 0 Green 30 0 Red 45 0 Yellow 60 0

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Black 00 Blue 200 Green 300 Red 450 Yellow 600 Woofer becoming directional. AR 303 would be worse Not valid below 300Hz Figure 1 AR 302 horizontal dispersion measured from drivers near edge of cabinet

  2. Not valid below 300Hz Figure 2 AR 302 horizontal average -5 degrees off tweeter axis 0, 20, 30, 45 degrees near edge of cabinet

  3. Black +1.50 Blue +4.50 Green +7.50 Red +10.50 AR 9 LS mid tweet combined driver would reduce this cancellation Black -1.50 Blue -4.50 Green -7.50 Not valid below 300Hz Figure 3 AR 302 vertical response. 0 degrees at tweeter axis

  4. At very high angles notch depth reduced but response is not as flat as -5 degrees from tweeter. Black +130 Blue +170 Green +210 Red +250 Yellow +300 Not valid below 300Hz Figure 4 AR 302 vertical response well above cabinet OK response at 25 degrees indicating floor placement is possible but far from optimal

  5. Not valid below 300Hz Figure 5 AR 302 vertical average -10, -5, 0, 5, 10, 15, 20, degrees from tweeter axis

More Related