1 / 20

Horizontal Servo Hotplate Welder 2040S Series

Horizontal Servo Hotplate Welder 2040S Series. Horizontal Servo Hotplate Welder. Feature Summary. 100% Servo-Electric Motion Control Three independent drives Quick Change Tool load/unload Advanced Controls Lean cell Friendly Rigid Construction. Horizontal Servo Hotplate Welder 2040S .

edita
Download Presentation

Horizontal Servo Hotplate Welder 2040S Series

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Horizontal Servo Hotplate Welder2040SSeries

  2. Horizontal Servo Hotplate Welder Feature Summary • 100% Servo-Electric Motion Control • Three independent drives • Quick Change Tool load/unload • Advanced Controls • Lean cell Friendly • Rigid Construction

  3. Horizontal Servo Hotplate Welder 2040S Horizontal, Hot Plate, Advanced Controls, Low Temperature, 20”D x 40”W, Servo, 3 drives, Horse Power 10 Standard Models HHAL2040S3-HP10 HHAL2040S3-HP3 HHAH2040S3-HP10 HHAH2040S3-HP3 HHAL2040S2-HP10 HHAL2040S2-HP3

  4. Horizontal Servo Hotplate Welder • Three Independent Control Servo Motion The Servo systems twin motion (upper and Lower) tool mounting platens allow independent control of collapse/absolute distance, & speed on each part half, both against the heat platen and against each other in weld phase, Typical hard-stops can be removed “Near” Melt allows soft touch contact with heater platen, reducing wear on platen. “Near “ Join allows soft touch collapse during join sequence, reducing flash, improves cosmetic appearance. Programmable minimum open distance (Clearance) and lightning quick removal speed of the heat platen there by reducing 'open time' substantially over conventional style welders.

  5. Horizontal Servo Hotplate Welder User intuitive teach mode

  6. Horizontal Servo Hotplate Welder • Quick Change Rear Tool load

  7. Horizontal Servo Hotplate Welder View movie

  8. Horizontal Servo Hotplate Welder User sequence tutorial • Quick Change Rear Tool load

  9. Advanced Controls • Siemens Control System. 10” industrial color touch screen HMI, 3000 series Siemens PLC, Siemens Servo Drives.

  10. Heater Controls • (12) Independent heater controls ensures even heating and precise temperature control. • Heater burnout alarms • Alarm limits • Run away heater control alarm

  11. Setup Control • 15 Programmable setups • 15 Nameable Tool ID Sets

  12. Programmable Password Protection

  13. Inputs and Outputs • Detail indicator screen, allows for quick troubleshooting

  14. Work Cell Friendly Top View

  15. Construction

  16. Construction Pneumatic Counter Balance system for upper and Lower platens to lower servo power consumption. (Green)

  17. Construction Pneumatic large access sliding door with opto touch single activation switch and light curtains.

  18. SpecificationsHHAL2040S3-HP3 • Weight: Approx 5000 lbs • Overall Dimensions 75”D x 57”W x 110” T (190mm x 145mm x 279mm) • Maximum Part Size 25.5”W x 17”D • Heat Platen Carriage Stroke 24” • Tool Mount Platens 20” D x 40” W (508mm x 1026mm) • Daylight 38.6” • Front Door Opening 52”W x 33.6” T • Depth Adjustment 0.001” (0.025mm) • Maximum Clamp force 2250 lbs (1520 continuous) • Axis Speeds Tool 10”per sec. Heat Platen 18” per sec Peak. • Temperature Zones 12 Digital Control via PLC w/ Heater Burnout Alarm • Thermal Temp Range 100 F - 1000 F (Application dependent) • Warranty 2 years (parts and Service) • Electrical requirements 240VAC, 100 amps. 3PH, 50/60 Hz • Pneumatic Requirements 80 PSI, 0.5 ID (5.4 Bar, 13mm ID)

  19. Questions Proudly Developed and Manufactured by Dukane at Worldwide Corporate HeadquartersSt. Charles, IL USA

More Related