230 likes | 375 Views
PV COOLING SYSTEMS. DESIGN, REALISATION, TESTS, COMPARATIVE ANALYSIS OF LOW ELECTRIC CONSUMPTION PV COOLING SYSTEMS COSTIC Comité Scientifique et Technique des Industries Climatiques Eric MICHEL Enerbuild Participant number : 37. PROJECT PARTNERS. COSTIC - France Technical co-ordinator
E N D
PV COOLING SYSTEMS DESIGN, REALISATION, TESTS, COMPARATIVE ANALYSIS OF LOW ELECTRIC CONSUMPTION PV COOLING SYSTEMS COSTIC Comité Scientifique et Technique des Industries Climatiques Eric MICHEL Enerbuild Participant number : 37
PROJECT PARTNERS COSTIC - France Technical co-ordinator EUREC - Belgium Administrative co-ordinator ALPES FROID - France Manufacturer of prototypes UNIVERSITY OF ATHENS - Greece Modelling and testing of the buried pipes prototype CIEMAT - Spain Modelling and testing of the evaporative air cooler prototype APEX - France Manufacturer of PV generator
PROJECT OBJECTIVE To develop two low electric consumption cooling systems for small or medium buildings well adapted for photovoltaic with ratio of performance (Frigorific power/Electrical power) higher than 20 : • PV buried pipes system • PV evaporative air cooler system Type of buildings : • Surface : from 50 to 250 m² • Tertiary sector - little and medium dwelling
PV Buried pipes system PV Evaporative air cooler system Adapted for a hot and wet or dry climate Adapted for a hot and dry climate TWO SYSTEMS STUDIED
BACKGROUND • Existing cooling systems : • Conventional heat pump with ratio of performance (Frigorific power/Electrical power) about 2 to 3 • Systems like buried pipes and evaporative air cooler have been tested in the case of application in 220 V A.C (with ratio about 6 to 10) but are not well adapted for photovoltaïc.
PROGRAMME OF THE PROJECT • The programme of this research project has been the following one : • Definition of needs • Design of air cooling devices • Manufacturing of prototypes • Tests of prototypes in laboratory • Experimental study of prototypes under real conditions of use • Analysis and comparison of different systems • Synthesis
Pf/Pe Inlet temperature [°C] Outlet temperature [°C] Ground temperature [°C] 14,7 30 20 18 20,8 35 20 18 27 40 20 18 TESTS IN LABORATORY : Performance for an installation of three buried pipes WITH AIR FLOW [1100 m³/h] AND FAN POWER 245 [W] Pf = Frigorific power Pe = Electric power
TESTS UNDER REAL CONDITIONS PV buried pipes tested in Athens Main results concerning all cooling season : Average ratio : Pf/Pe = 18 Maximum ratio : Pf/Pe = 35
PV BURIED PIPES COUPLED WITH OFFICE BUILDING IN MADRID (60M²) + : Indoor temperature with cooling x : Indoor temperature without cooling : Outdoor temperature PV surface : 5 m2 ; 500 Wp Pipe number : 3 Lenght pipe : 50 m
DETERMINATION OF THE BURIED PIPE SIZING AND THE PV SUPPLY
PRINCIPLE OF PV EVAPORATIVE AIR COOLER 1 2 3 4 1 : Heat and dry air 2 : Cool and wet air 3 : Humidification plate 5 6 4 : Fan 5 : Storage water 6 : Water pump
TESTS IN LABORATORY : Performance for an installation of evaporative air cooler Outside air température = 40°C ; Hygrometry = 25%
TESTS UNDER REAL CONDITIONS PV evaporative air cooler tested in Madrid Main results for a sunny day in August : Average ratio : Pf/Pe = 43 Maximum ratio : Pf/Pe = 110
DETERMINATION OF THE EVAPORATIVE AIR COOLER SIZING AND THE PV SUPPLY
CONCLUSION • These cooling techniques can be used in developing countries and Mediterranean countries. • With these systems, it could be possible to cool premises such as little office buildings or dwellings. The ratio of performance can exceed the value of 20. • A financial study showed that investmentcosts of conventional systems compared to the investment costs of the new devices developed during the programme are rather equal
CONCLUSION • Along the hot season, these systems only allow to reduce the temperature inside the premises of 3 to 4 K compared to the situation without any conventional air conditioning systems. For instance in the south of France it is possible to reach the comfort conditions during about 80 to 90 % of summer. • Proposition of an accompanying measure to achieve demonstration programme and design guidelines