Download
1 / 50
500 likes | 530 Views
Protect yourself from hazardous energies while working by implementing lockout/tagout systems and proper handling of materials. Electrical cords should have labeled attachments, and never operate equipment with lockout devices. Utilize fire watch during welding, aim at the base of a fire with extinguishers, and store combustible materials in approved containers. Understand HazCom to know emergency protocols and exposure limits from MSDS. Check for broken components before using scaffolds and always use proper fall protection systems. Lift heavy objects with caution and wear recommended respiratory and safety gear. Maintain your equipment regularly, practice safe behaviors, and ensure work areas are free from hazards. Stay vigilant to eliminate proximity hazards and remember that even a small electrical shock can be lethal in construction settings.
E N D
To protect yourself from hazardous energy sources while working on machines and equipment use….
Every electrical cord should have an _____ label attached to it with important information about the cord’s use designation.
Never operate a piece of electrical equipment that has a ____ attached to it.
When using a fire extinguisher, you should aim at the ____ of the fire.
To prevent fires you should store combustible materials in _________ .
HazCom is important because it makes employers and employees responsible for knowing __________ .
A Material Safety Data Sheet contains important information about a hazardous substance including its ________.
______ ladders are rated for extra heavy duty or professional use.
Fall protection systems are required whenever a work area with an unprotected side is more than ____ above ground.
When lifting a heavy object, you should keep your back ______________ .
To get your hands under an object that is flat on the floor, ___________________ .
_______ with a proper fit is recommended to protect a worker from brief exposure to dangerous gasses or fumes.
You should replace your steel toed safety shoes when they ______ .
Hard hats for construction workers should be made of _____________ .
Danger from falling objects or a suspended load over a work area is indicated by a ____ barricade.
When operating internal combustion engines indoors, good ventilation is essential to protect workers from the dangers of ______ .
To remove talc and loose bits of rubber from new hoses, use ______ .
A jobsite can be considered a safe place to work when workers ________ .
One part of job site safety is that the job site should be free from ________ hazards.
The term _____ refers to working near but not in direct contact with a hazard.
Electrical safety is important in the construction crafts because a shock of less than ___ can kill you.
