Basic tips when working with electricity by Electrician Frankston

1. Basic tips when working with electricity Electricity is one of the most widely used energies today, however, it is also one of the most dangerous. Professionals who regularly work with electricity, generally have extensive knowledge about the behavior of electricity, the risks involved, and the safety measures that must be taken when working with it. Electricity is one of the most widely used energies today, however, it is also one of the most dangerous. Professionals who regularly work with electricity, generally have extensive knowledge about the behavior of electricity, the risks involved, and the safety measures that must be taken when working with it. Many of the basic safety measures to take when working with electricity are common-sense measures, however, there are others that are not so much, and not having specific training in this area can lead us to make mistakes that we can get very expensive.

2. In the following article we are going to expose some basic tips when working with electricity, intended mainly for those people who are not professionals but who usually venture to carry out small repairs or electrical installations at home: 1.Periodically reviewing the electrical installation of our home helps us increase the electrical safety of our home, both in daily life and when making new installations or specific arrangements. We must ensure that the installation is in excellent condition and correctly grounded and that it checks that the electrical installation is in perfect condition and that the ground cables are properly placed. 2.We must wear appropriate clothing, the ideal is to wear clothing that is tight enough and shoes with a rubber sole that does not slip. 3.Make sure that the area is completely dry, never work if there is water in the area where we will be handling elements with electricity. 4.Do not use metallic elements on the body, such as rings, watches, etc., since we can inadvertently cause a current bypass through them. 5.When you are going to proceed to repair any lamp, plug, socket, or element of the electrical installation, make sure that the electrical current of the house is completely disconnected. 6.If we are not clear, if the current is completely disconnected, then better not to risk it. 7.Use the right tools when doing the job.

3. 8.If possible use gloves. 9.If we are going to be absent from our home for several days, it is advisable to completely disconnect the current from the installation, thus reducing the risks of short circuits and derived fires. In the event that we receive an electric shock we should follow the following tips, depending on the severity of the shock, the protocol to follow will be different, generally in our homes we will work in low voltage, for this reason the protocol will be: 1.In case you have received a small shock, try to relax, leave the area and disconnect the electricity until you discover the reasons why the shock has occurred. In small discharges apart from the general discomfort we will not need treatment. Sometimes a burn may occur in the contact area, in which case we will use cream for the burns. 2.If the discharge is greater, it is possible that we faint, in which case the person accompanying us must quickly disconnect the electricity, without we have been stuck to the object, the best way to separate without touching is to use a wooden stick. If they try to separate us manually and the electricity is still running, they can get shocked. If you need any kind of Electricians support visit Electrician Frankston