1 / 25

H9MO-LMXE+ introduction

H9MO-LMXE+ introduction. SDH and PCM in one system. Equip- ment. H9MO MSTP. Mana- gement. Service access. Brief introduction. H9MO Multi-Service Transmission Platform. Multi-Service Transmission Platform. Brief introduction.

elise
Download Presentation

H9MO-LMXE+ introduction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. H9MO-LMXE+ introduction SDH and PCM in one system

  2. Equip- ment H9MO MSTP Mana- gement Service access Brief introduction H9MOMulti-Service Transmission Platform Multi-Service Transmission Platform

  3. Brief introduction H9MO-LMXE+ is a carrier-class, cost-effective, compact, STM-1/4/16SDH and PCM in one machine system designed for application in metro and access networks to facilitate the efficient transport of traditional TDM , Voice and data traffic for service providers.

  4. Ethernet aggregation card Cross Connection card FE06,FE07,GX01A,GX02,GX05,GX06,GX10 Brief introduction 0X01/0X04A/0X16A Interface card

  5. Brief introduction SDH network STM-1/4/16 Or router

  6. Rack and system structure

  7. Rack and system structure

  8. Card introduction Ethernet service card Cross connection &uplink card Optical tributary card E1 service card Ethernet aggregation card

  9. Card introduction Power and NM card CWDM card Voice service card

  10. Card introduction • PWR01: • DC-48V Power Supply, can be 1+1. • PWR02: • AC 220V Supply, can be 1+1. • PWR02B: • AC 110V Supply, can be 1+1.

  11. Card introduction • Provides management for the whole H9M0-LMXE+ system; • Support Huahuan GUI EMS management; • It can monitor and show the status of all cards and the remote equipment. • Support concatenation

  12. Card introduction • Used in Slot X1 and X2 • Provide 2 STM-1/4/16 interface • VC4 and VC12 level cross connection • 2 built-in E1 BER testers • Clock complies with ITU-T G.813(with one pair of external clock input and output on the backplane) • Support SNCP protection • Can be used to connect to the core networknodes(uplink) • Can form a ring network with other SDH equipment

  13. Card introduction • OS01 used in any service slot (slot 1-14) • OS04A only used in slot 7&8 • Provide 2 STM-1/4 interface • Support SNCP protection

  14. Card introduction • 4 100/10Base-Tx or 100/10Base-Fx Ethernet ports on the card; • 4 separate VCG channel through VC-12 • FE01,FE02 Ethernet over SDH(EoS) • FE04,FE05 Ethernet over E1(EoE) • Support LCAS • VLAN supported

  15. Card introduction • 2 100Bast-Tx interface • FE06 Ethernet over SDH(EoS) • FE07 Ethernet over E1(EoE) • 8 internal VCG, aggregation ratio 8:1 • Max aggregation ration: 56:1 • 802.1Q based VLAN • Support GFP and LCAS

  16. Card introduction • Gigabit Ethernet Aggregation Card • 1 Electrical Gigabit Ethernet Port and 1 Optical Gigabit Ethernet Port (SFP Type) • Support GFP/LCAS/VCAT/VLAN • GX01A GX02A • 8 internal VCG, aggregation ratio 8:1 • GX10 • 63 internal VCG, aggregation ratio 63:1 • GX01A Ethernet over SDH(EoS) • GX02A GX10 Ethernet over E1(EoE)

  17. Gigabit Ethernet Aggregation Card • 2 Electrical Gigabit Ethernet Port and 2 Optical Gigabit Ethernet Port (SFP Type) • 16 internal VCG, aggregation ratio 16:1 • Support GFP/LCAS/VCAT/ VLAN • STP/RSTP/Trunk supported • GX05 Ethernet over SDH(EoS) • GX06 Ethernet over E1(EoE)

  18. Card introduction • PCM Card • CHL01 10 FXO channels, can be used in any service slot(slot 1-14) • CHR01 10 FXS channels, can only be used in service and multi-function slot (slot 8-13), Ring card should be equipped

  19. Card introduction • PCM Card • CHM01: 4 FXS+4 4/W(with E&M)+4 RS232 channels, can only be inserted into slot 8-13 • CHU01: 10 voice channels, can be set to FXS/FXO/ • hotline/magnet, can only be inserted into slot 8-13 (unless all 10 channel is set to FXO mode) • CH4W01 : 10 4/W Voice(no E&M) channels, can be used in any service slot(slot 1-14)

  20. Card introduction • PCM Card • EM20 20 Channel E&M interface • DIO20 20 Channel IO signal interface

  21. Card introduction • Ring Card • RING 220V: 220Vpower input ring card • RING 48V: 48Vpower input ring card

  22. Application

  23. Application

  24. Application EoPDH application

  25. Thank You Support: CAO DUY LINH Email: linh@huahuan.com Phone: 0904998448

More Related