1 / 10

PARKING AUTOMATION SYSTEM

PARKING AUTOMATION SYSTEM. Functional details:.

elizabethjjones
Download Presentation

PARKING AUTOMATION SYSTEM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PARKING AUTOMATION SYSTEM

  2. Functional details: Manual check-in processes can cause errors and delay in accounting for vehicles, especially during peak times when vehicle backlogs often occur. Some vehicles might be missed altogether and vehicle or driver IDs can be logged in error. To automate the vehicle moment in we need to install Long Range RFID readers in entrance exit locations These readers are connected by internal LAN and are connected with central server. Our offered solution identifies the vehicles at all entry & exit points. The RFID tags are issued permanently to the vehicle.

  3. Main Modules of Parking Software Desktop Application Automatic In/Out Tracking Security Reports

  4. Automatic Vehicle Identification System During the entry exit process the vehicle movement will be identified and any deviation the same will be flashed to the control room through dashboard that can be generated as reports. To make the process easy issue passes for monthly, half yearly and yearly basis.

  5. Actual Working and Data Processing

  6. Automatic vehicle Entry and Exit 1.RFID stickers are applied on vehicle (on Front glass) 2.When vehicle enters near to reader which is placed at IN/OUT boom barrier , UHF reader reads data and sent to Software through LAN .If data is valid(Registered vehicle) then software will send Open command to Electronic controller, 3.Controller will send command to Boom and it gets opened. 4.After Passing vehicle through the boom, sensor sense the vehicle and automatically close the barrier.

  7. Process Flow - Entry Lane Presence Loop is activated Validate User Account from Local Database RFID Reader Detect the Tag User Enters the Lane IF Vehicle crosses over the Boom Traffic light = Green Barrier = Up Barrier =Down Traffic Light = Red

  8. 1 Hardware Integration 1. Automatic Boom Barrier 2.UHF Reader 3. Electronic Controller And Computer 2 3

  9. Equipments – Control Centre Central Database Server Backup Server Workstation Computer Smart Card Reader

  10. .. Thank You ..

More Related