1 / 50

ConcepTest 21.1 Connect the Battery

ConcepTest 21.1 Connect the Battery . 4) all are correct 5) none are correct. Which is the correct way to light the lightbulb with the battery?. 1). 2). 3). ConcepTest 21.1 Connect the Battery . 4) all are correct 5) none are correct.

ellis
Download Presentation

ConcepTest 21.1 Connect the Battery

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ConcepTest 21.1 Connect the Battery 4) all are correct 5) none are correct Which is the correct way to light the lightbulb with the battery? 1) 2) 3)

  2. ConcepTest 21.1 Connect the Battery 4) all are correct 5) none are correct Which is the correct way to light the lightbulb with the battery? 1) 2) 3) Current can only flow if there is a continuous connection from the negative terminal through the bulb to the positive terminal. This is only the case for Fig. (3).

  3. ConcepTest 21.2Ohm’s Law 1) Ohm’s law is obeyed since the current still increases when V increases 2) Ohm’s law is not obeyed 3) this has nothing to do with Ohm’s law You double the voltage across a certain conductor and you observe the current increases three times. What can you conclude?

  4. ConcepTest 21.2Ohm’s Law 1) Ohm’s law is obeyed since the current still increases when V increases 2) Ohm’s law is not obeyed 3) this has nothing to do with Ohm’s law You double the voltage across a certain conductor and you observe the current increases three times. What can you conclude? Ohm’s law, V = I R, states that the relationship between voltage and current is linear. Thus for a conductor that obeys Ohm’s Law, the current must double when you double the voltage. Follow-up: Where could this situation occur?

  5. ConcepTest 21.3aWires I 1) dA = 4 dB 2) dA = 2 dB 3) dA = dB 4) dA = 1/2 dB 5) dA = 1/4 dB Two wires, A and B, are made of the same metal and have equal length, but the resistance of wire A is four times the resistance of wire B. How do their diameters compare?

  6. ConcepTest 21.3aWires I 1) dA = 4 dB 2) dA = 2 dB 3) dA = dB 4) dA = 1/2 dB 5) dA = 1/4 dB Two wires, A and B, are made of the same metal and have equal length, but the resistance of wire A is four times the resistance of wire B. How do their diameters compare? The resistance of wire A is greater because its area is less than wire B. Since area is related to radius (or diameter) squared, the diameter of A must be two times less than B.

  7. ConcepTest 21.3b Wires II 1) it decreasesby a factor 4 2) it decreasesby a factor 2 3) it stays the same 4) it increasesby a factor 2 5) it increasesby a factor 4 A wire of resistance R is stretched uniformly (keeping its volume constant) until it is twice its original length. What happens to the resistance?

  8. ConcepTest 21.3b Wires II 1) it decreasesby a factor 4 2) it decreasesby a factor 2 3) it stays the same 4) it increasesby a factor 2 5) it increasesby a factor 4 A wire of resistance R is stretched uniformly (keeping its volume constant) until it is twice its original length. What happens to the resistance? Keeping the volume (= area x length) constant means that if the length is doubled, the area is halved. Since , this increases the resistance by four.

  9. 9 V ConcepTest 21.4a Series Resistors I 1)12 V 2)zero 3)3 V 4) 4 V 5) you need to know the actual value of R Assume that the voltage of the battery is 9 V and that the three resistors are identical. What is the potential difference across each resistor?

  10. 9 V ConcepTest 21.4a Series Resistors I 1)12 V 2)zero 3)3 V 4) 4 V 5) you need to know the actual value of R Assume that the voltage of the battery is 9 V and that the three resistors are identical. What is the potential difference across each resistor? Since the resistors are all equal, the voltage will drop evenly across the 3 resistors, with 1/3 of 9 V across each one. So we get a 3 V drop across each. Follow-up: What would be the potential difference if R= 1 W, 2 W, 3 W ?

  11. R1= 4 W R2= 2 W 12 V ConcepTest 21.4b Series Resistors II 1)12 V 2)zero 3)6 V 4) 8 V 5) 4 V In the circuit below, what is the voltage across R1?

  12. R1= 4 W R2= 2 W 12 V ConcepTest 21.4b Series Resistors II 1)12 V 2)zero 3)6 V 4) 8 V 5) 4 V In the circuit below, what is the voltage across R1? The voltage drop across R1 has to be twice as big as the drop across R2. This means that V1 = 8 V and V2 = 4 V. Or else you could find the current I = V/R = (12 V)/(6 W) = 2 A, then use Ohm’s Law to get voltages. Follow-up: What happens if the voltage is doubled?

  13. R2= 2 W R1= 5 W 10 V ConcepTest 21.5a Parallel Resistors I 1)10 A 2)zero 3)5 A 4) 2 A 5) 7 A In the circuit below, what is the current through R1?

  14. R2= 2 W R1= 5 W 10 V ConcepTest 21.5a Parallel Resistors I 1)10 A 2)zero 3)5 A 4) 2 A 5) 7 A In the circuit below, what is the current through R1? The voltage is the same (10 V) across each resistor because they are in parallel. Thus, we can use Ohm’s Law, V1 = I1 R1 to find the current I1 = 2 A. Follow-up: What is the total current through the battery?

  15. ConcepTest 21.5b Parallel Resistors II 1)increases 2)remains the same 3)decreases 4) drops to zero Points P and Q are connected to a battery of fixed voltage. As more resistors R are added to the parallel circuit, what happens to the total current in the circuit?

  16. ConcepTest 21.5b Parallel Resistors II 1)increases 2)remains the same 3)decreases 4) drops to zero Points P and Q are connected to a battery of fixed voltage. As more resistors R are added to the parallel circuit, what happens to the total current in the circuit? As we add parallel resistors, the overall resistance of the circuit drops. Since V = IR, and V is held constant by the battery, when resistance decreases, the current must increase. Follow-up: What happens to the current through each resistor?

  17. ConcepTest 21.6a Short Circuit 1) all the current continues to flow through the bulb 2) half the current flows through the wire, the other half continues through the bulb 3)all the current flows through the wire 4) none of the above Current flows through a lightbulb. If a wire is now connected across the bulb, what happens?

  18. ConcepTest 21.6a Short Circuit 1) all the current continues to flow through the bulb 2) half the current flows through the wire, the other half continues through the bulb 3)all the current flows through the wire 4) none of the above Current flows through a lightbulb. If a wire is now connected across the bulb, what happens? The current divides based on the ratio of the resistances. If one of the resistances is zero, then ALL of the current will flow through that path. Follow-up: Doesn’t the wire have SOME resistance?

  19. ConcepTest 21.6b Short Circuit II 1) glow brighter than before 2) glow just the same as before 3) glow dimmer than before 4) go out completely 5) explode Two lightbulbs A and B are connected in series to a constant voltage source. When a wire is connected across B, bulb A will:

  20. ConcepTest 21.6b Short Circuit II 1) glow brighter than before 2) glow just the same as before 3) glow dimmer than before 4) go out completely 5) explode Two lightbulbs A and B are connected in series to a constant voltage source. When a wire is connected across B, bulb A will: Since bulb B is bypassed by the wire, the total resistance of the circuit decreases. This means that the current through bulb A increases. Follow-up: What happens to bulb B?

  21. ConcepTest 21.7aCircuits I 1) circuit 1 2) circuit 2 3) both the same 4) it depends on R The lightbulbs in the circuit below are identical with the same resistance R. Which circuit produces more light? (brightness  power)

  22. ConcepTest 21.7aCircuits I 1) circuit 1 2) circuit 2 3) both the same 4) it depends on R The lightbulbs in the circuit below are identical with the same resistance R. Which circuit produces more light? (brightness  power) In #1, the bulbs are in parallel, lowering the total resistance of the circuit. Thus, circuit #1 willdraw a higher current, which leads to more light, because P = I V.

  23. A C B 10 V ConcepTest 21.7b Circuits II 1) twice as much 2) the same 3) 1/2 as much 4) 1/4 as much 5) 4 times as much The three lightbulbs in the circuit all have the same resistance of1 W . By how much is the brightness of bulb B greater or smaller than the brightness of bulb A? (brightness  power)

  24. A C B 10 V ConcepTest 21.7b Circuits II 1) twice as much 2) the same 3) 1/2 as much 4) 1/4 as much 5) 4 times as much The three lightbulbs in the circuit all have the same resistance of1 W . By how much is the brightness of bulb B greater or smaller than the brightness of bulb A? (brightness  power) We can use P = V2/R to compare the power: PA = (VA)2/RA = (10 V) 2/1 W= 100 W PB = (VB)2/RB = (5 V) 2/1 W= 25 W Follow-up: What is the total current in the circuit?

  25. R1 S R3 V R2 ConcepTest 21.8aMore Circuits I 1) increase 2) decrease 3) stay the same What happens to the voltage across the resistor R1 when the switch is closed? The voltage will:

  26. R1 S R3 V R2 ConcepTest 21.8aMore Circuits I 1) increase 2) decrease 3) stay the same What happens to the voltage across the resistor R1 when the switch is closed? The voltage will: With the switch closed, the addition of R2 to R3decreases the equivalent resistance, so the current from the battery increases. This will cause an increase in the voltage across R1 . Follow-up:What happens to the current through R3?

  27. R1 S R3 R4 V R2 ConcepTest 21.8b More Circuits II 1) increases 2) decreases 3) stays the same What happens to the voltage across the resistor R4 when the switch is closed?

  28. ConcepTest 21.8b More Circuits II R1 B A S R3 R4 V R2 C 1) increases 2) decreases 3) stays the same What happens to the voltage across the resistor R4 when the switch is closed? We just saw that closing the switch causes an increase in the voltage across R1 (which is VAB). The voltage of the battery is constant, so if VAB increases, then VBC must decrease! Follow-up:What happens to the current through R4?

  29. R5 R2 R3 R1 R4 V 1) R1 2) both R1and R2 equally 3) R3and R4 4) R5 5) all the same ConcepTest 21.9Even More Circuits Which resistor has the greatest current going through it? Assume that all the resistors are equal.

  30. R5 R2 R3 R1 R4 V 1) R1 2) both R1and R2 equally 3) R3and R4 4) R5 5) all the same ConcepTest 21.9Even More Circuits Which resistor has the greatest current going through it? Assume that all the resistors are equal. The same current must flow through left and right combinations of resistors. On the LEFT, the current splits equally, so I1 = I2. On the RIGHT, more current will go through R5 than R3+ R4 since the branch containing R5 has less resistance. Follow-up:Which one has the smallest voltage drop?

  31. ConcepTest 21.10Dimmer 1)the power 2)the current 3)the voltage 4) both (1) and (2) 5) both (2) and (3) When you rotate the knob of a light dimmer, what is being changed in the electric circuit?

  32. ConcepTest 21.10Dimmer 1)the power 2)the current 3)the voltage 4) both (1) and (2) 5) both (2) and (3) When you rotate the knob of a light dimmer, what is being changed in the electric circuit? The voltage is provided at 120 V from the outside. The light dimmer increases the resistance and therefore decreases the current that flows through the lightbulb. Follow-up: Why does the voltage not change?

  33. ConcepTest 21.11a Lightbulbs 1)the 25 W bulb 2)the 100 W bulb 3)both have the same 4) this has nothing to do with resistance Two lightbulbs operate at 120 V, but one has a power rating of 25 W while the other has a power rating of 100 W. Which one has the greater resistance?

  34. ConcepTest 21.11a Lightbulbs 1)the 25 W bulb 2)the 100 W bulb 3)both have the same 4) this has nothing to do with resistance Two lightbulbs operate at 120 V, but one has a power rating of 25 W while the other has a power rating of 100 W. Which one has the greater resistance? Since P = V2 / R,the bulb with the lower power rating has to have the higher resistance. Follow-up: Which one carries the greater current?

  35. ConcepTest 21.11bSpace Heaters I 1)heater 1 2)heater 2 3)both equally Two space heaters in your living room are operated at 120 V. Heater 1 has twice the resistance of heater 2. Which one will give off more heat?

  36. ConcepTest 21.11bSpace Heaters I 1)heater 1 2)heater 2 3)both equally Two space heaters in your living room are operated at 120 V. Heater 1 has twice the resistance of heater 2. Which one will give off more heat? Using P = V2 / R,the heater with the smaller resistance will have the larger power output. Thus, heater 2 will give off more heat. Follow-up: Which one carries the greater current?

  37. 5 A P 8 A 2 A ConcepTest 21.12Junction Rule 1) 2 A 2) 3 A 3) 5 A 4) 6 A 5) 10 A What is the current in branch P?

  38. ConcepTest 21.12Junction Rule 5 A P 8 A 6 A junction 2 A 1) 2 A 2) 3 A 3) 5 A 4) 6 A 5) 10 A What is the current in branch P? The current entering the junction in red is 8 A, so the current leaving must also be 8 A. One exiting branch has 2 A, so the other branch (at P) must have 6 A. S

  39. ConcepTest 21.13Kirchhoff’s Rules 1) both bulbs go out 2) intensity of both bulbs increases 3) intensity of both bulbs decreases 4) A gets brighter and B gets dimmer 5) nothing changes The lightbulbs in the circuit are identical. When the switch is closed, what happens?

  40. ConcepTest 21.13Kirchhoff’s Rules 24 V Follow-up:What happens if the bottom battery is replaced by a 24 V battery? 1) both bulbs go out 2) intensity of both bulbs increases 3) intensity of both bulbs decreases 4) A gets brighter and B gets dimmer 5) nothing changes The lightbulbs in the circuit are identical. When the switch is closed, what happens? When the switch is open, the point between the bulbs is at 12 V. But so is the point between the batteries. If there is no potential difference, then no current will flow once the switch is closed!! Thus, nothing changes.

  41. a I b V 1) I 2) I/2 3) I/3 4) I/4 5) zero ConcepTest 21.14 Wheatstone Bridge An ammeter A is connected between points a and b in the circuit below, in which the four resistors are identical. The current through the ammeter is:

  42. a I b V 1) I 2) I/2 3) I/3 4) I/4 5) zero ConcepTest 21.14 Wheatstone Bridge An ammeter A is connected between points a and b in the circuit below, in which the four resistors are identical. The current through the ammeter is: Since all resistors are identical, the voltage drops are the same across the upper branch and the lower branch. Thus, the potentials at points a and b are also the same. Therefore, no current flows.

  43. 1  I2 2  6 V 2 V 2 V 4 V I3 I1 1  3  ConcepTest 21.15 MoreKirchhoff’s Rules 1) 2 – I1 – 2I2 = 0 2) 2 – 2I1 – 2I2 – 4I3 = 0 3) 2 – I1 – 4 – 2I2 = 0 4) I3 – 4 – 2I2 + 6 = 0 5) 2 – I1 – 3I3 – 6= 0 Which of the equations is valid for the circuit below?

  44. 1  I2 2  6 V 2 V 2 V 4 V I3 I1 1  3  ConcepTest 21.15 MoreKirchhoff’s Rules 1) 2 – I1 – 2I2 = 0 2) 2 – 2I1 – 2I2 – 4I3 = 0 3) 2 – I1 – 4 – 2I2 = 0 4) I3 – 4 – 2I2 + 6 = 0 5) 2 – I1 – 3I3 – 6= 0 Which of the equations is valid for the circuit below? Eqn. 3 is valid for the left loop: The left battery gives +2V, then there is a drop through a 1W resistor with current I1 flowing. Then we go through the middle battery (but from + to – !), which gives –4V. Finally, there is a drop through a 2W resistor with current I2.

  45. o C Ceq C C o ConcepTest 21.16aCapacitors I 1) Ceq= 3/2 C 2) Ceq= 2/3 C 3) Ceq= 3 C 4) Ceq= 1/3 C 5) Ceq= 1/2 C What is the equivalent capacitance, Ceq , of the combination below?

  46. o C Ceq C C o ConcepTest 21.16aCapacitors I 1) Ceq= 3/2 C 2) Ceq= 2/3 C 3) Ceq= 3 C 4) Ceq= 1/3 C 5) Ceq= 1/2 C What is the equivalent capacitance, Ceq , of the combination below? The 2 equal capacitors in series add up as inverses, giving 1/2 C. These are parallel to the first one, which add up directly. Thus, the total equivalent capacitance is 3/2 C.

  47. C2 = 1.0 mF C3 = 1.0 mF C1 = 1.0 mF 10 V ConcepTest 21.16b Capacitors II 1) V1=V2 2) V1>V2 3) V1<V2 4) all voltages are zero How does the voltage V1 across the first capacitor (C1) compare to the voltage V2 across the second capacitor (C2)?

  48. C2 = 1.0 mF C3 = 1.0 mF C1 = 1.0 mF 10 V ConcepTest 21.16b Capacitors II 1) V1=V2 2) V1>V2 3) V1<V2 4) all voltages are zero How does the voltage V1 across the first capacitor (C1) compare to the voltage V2 across the second capacitor (C2)? The voltage across C1 is 10 V. The combined capacitors C2+C3 are parallel to C1. The voltage across C2+C3 is also 10 V. Since C2 and C3 are in series, their voltages add. Thus the voltage across C2 and C3 each has to be 5 V, which is less than V1. Follow-up:What is the current in this circuit?

  49. C2 = 1.0 mF C3 = 1.0 mF C1 = 1.0 mF 10 V 1) Q1=Q2 2) Q1>Q2 3) Q1<Q2 4) all charges are zero ConcepTest 21.16c Capacitors III How does the charge Q1 on the first capacitor (C1) compare to the charge Q2 on the second capacitor (C2)?

  50. C2 = 1.0 mF C3 = 1.0 mF C1 = 1.0 mF 10 V 1) Q1=Q2 2) Q1>Q2 3) Q1<Q2 4) all charges are zero ConcepTest 21.16c Capacitors III How does the charge Q1 on the first capacitor (C1) compare to the charge Q2 on the second capacitor (C2)? We already know that the voltage across C1 is 10 V and the voltage across both C2 and C3 is 5 V each. Since Q = CV and C is the same for all the capacitors, then since V1 > V2 therefore Q1 > Q2.

More Related