1 / 6

Net IO

Net IO. Setup Alarm Tunneling. Setup Alarm Behavior. Set Normally Open or Closed Set Normal or Supervised (1K Ω Series R) Set input time filter (Static for none). Set up remote tunnel. Set the Virtual Aux to the destination ip address Set the Aux number to the Aux Output number to trigger

emerson-heath
Download Presentation

Net IO

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Net IO Setup Alarm Tunneling

  2. Setup Alarm Behavior • Set Normally Open or Closed • Set Normal or Supervised (1K Ω Series R) • Set input time filter (Static for none)

  3. Set up remote tunnel • Set the Virtual Aux to the destination ip address • Set the Aux number to the Aux Output number to trigger • 1 for an N-111 • 1 thru 6 for an N-664 • 1 or 2 for an N-TAH • 1 thru 4 for a CXB-6p-PoE

  4. Set up remote Aux Behavior • Set the remote Aux to turn On or Off (Set to the opposite of the “normal” state) • Set the Output trigger Duration. Typically “Follow” • Click “Save” • Test with the ON and OFF buttons

More Related