1 / 8

Bent Polishing Tutorial

Bent Polishing Tutorial. ≠. Good Bent. Night-Before Bent. Starting Out - Supplies. Metal files Available from Home Depot, Lowes, etc.. ($5-10 for a set of several) Check out from office These are old and might not file as fast or as well Sand Paper

emily
Download Presentation

Bent Polishing Tutorial

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Bent Polishing Tutorial ≠ Good Bent Night-Before Bent

  2. Starting Out - Supplies • Metal files • Available from Home Depot, Lowes, etc.. ($5-10 for a set of several) • Check out from office • These are old and might not file as fast or as well • Sand Paper • Range of grits from ~60 to 600 • Brasso • Available in the office • Newspaper/old rags • Steel wool

  3. Step 1: Preparing Your Workspace • Filing metal will produce metal shavings… • Put old newspaper or something down so you don’t make a mess • Wash your hands when you’re done • You might want to wear old clothes as well

  4. Begin filing with your largest file in a single direction Continue in that direction until all scratches are aligned in that direction DO NOT FILE TOO HARD!!!! Change directions 90° Continue filing until all scratches are now in that direction… Time to move on to step 3! Step 2: Filing

  5. Step 3: Sandpaper • Start with low grit (~180), anything lower than that will leave scratches • Same method as for filing • Increase grit with every change of direction up to about 600 grit

  6. Step 4: Finishing Touches • Brasso and Steel wool are the last steps in the process • Steel wool can be used before or after brasso to add shine • Come to the office, borrow the brasso, take it outside, and rub it on with an old cloth or t-shirt • Make sure to rub it in quite well • Rub off the brasso with a dry cloth or shirt

  7. More on Step 4 • This is a very important step • Using a cloth or newspaper, keep repeating this step over and over to get rid of dullness and very small scratches • After this step, your bent should look almost as if it is made of gold and have a nice shine • Once you finish this step, find an old sock or cloth to carry your bent around in to prevent scratching

  8. Additional Tips • Ask questions and advice • Start work early • Come by the office for feedback • If you think it is physically possible for it to improve… keep working • If you can’t see yourself in it… keep working • Some chapters suggest using windex as a final step • You can, under no circumstances, use any form of mechanical assistance such as grinders or polishers • Maintain the original shape of the bent as best you can!

More Related