1 / 43

Environmental Controls II/IIG

Environmental Controls II/IIG. Lecture 4 Lighting Design Example. Example 1 Room Layout Calculation. Example 1. Classroom 20’ x 27’ x 12’ E=50 fc WP= 2’-6” AFF ρ c = 80% h cc = 0.0’ ρ w = 50% h rc = 9.5’ ρ f = 20% h fc = 2.5’ fixture: fluorescent (#38) maintenance: yearly

emily
Download Presentation

Environmental Controls II/IIG

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Environmental Controls II/IIG Lecture 4 Lighting Design Example

  2. Example 1 Room Layout Calculation

  3. Example 1 Classroom 20’ x 27’ x 12’ E=50 fc WP= 2’-6” AFF ρc= 80% hcc= 0.0’ ρw= 50% hrc= 9.5’ ρf= 20% hfc= 2.5’ fixture: fluorescent (#38) maintenance: yearly replacement: on burnout voltages & ballast: normal environment: medium clean

  4. Example 1 Confirm fixture data S: T.15.1 p. 631

  5. Example 1 Complete #1-6

  6. Example 1 7. Determine lumens per luminaire Obtain lamp lumens from manufacturer’s data (or see Stein: Chapter 12) S: T. 12.5 p. 538

  7. Lumen Flux Method 0’ 27’ ρc= 80% ρw= 50% ρf= 20% 8. Record dimensional data 9.5’ 20’ 2.5’

  8. Coefficient of Utilization Factor(CU) Calculation 9. Calculate Cavity Ratios

  9. Example 1: Cavity Ratios CR = 5 H x (L+W)/(L x W) RCR = 5 Hrc x (L+W)/(LxW) = 4.1 CCR = 5 Hcc x (L+W)/(LxW) = 0 FCR = 5 Hfc x (L+W)/(LxW) = 1.1

  10. Coefficient of Utilization Factor(CU) Calculation 10. Calculate EffectiveCeiling Reflectance

  11. Example 1: Coefficient of Utilization (CU) 3. Obtain effective ceiling reflectance: S: T.15.2 p. 657

  12. Example 1 11. Calculate EffectiveFloor ReflectanceStein: T.15.2 P. 657

  13. Example 1: Coefficient of Utilization (CU) 3. Obtain effective ceiling reflectance: CU= 0.19  0.20 S: T.15.2 p. 657

  14. Example 1 12. Select CU from mfr’s data or see

  15. Example 1: Coefficient of Utilization (CU) CU=0.32 S: T.15.1 p. 631 RCR CU 4.0 0.39 4.1 X 5.0 0.35 CU= 0.386

  16. Example 1 13-21 Calculate LLF

  17. Example 1: Light Loss Factor(LLF) 13-16 All factors not known 0.88

  18. Example 1: Light Loss Factor(LLF) 17. Room Surface Dirt (based on 24 month cleaning cycle, normal maintenance) Direct 0.92 +/- 5%

  19. Light Loss Factor(LLF) Calculation 18. Lamp Lumen Depreciation Group Burnout Fluorescent 0.90 0.85

  20. Example 1: Light Loss Factor(LLF) 19. Burnouts Burnout 0.95

  21. Example 1: Light Loss Factor(LLF) 20. Luminaire Dirt Depreciation (LDD) Verify maintenance category S: T.15.1 p. 631

  22. Example 1: Light Loss Factor(LLF) 20. Luminaire Dirt Depreciation (LDD) LDD=0.80 S: F.15.34 p. 653

  23. Example 1: Light Loss Factor(LLF) LLF = [a x b x c x d] x e x f x g x h LLF = [0.88] x 0.92 x 0.85 x 0.95 x 0.80 LLF = 0.52

  24. Example 1 22. Calculate Number of Luminaires 22 23

  25. Example1: Calculate Number of Luminaires No. of Luminaires = (E x Area)/(Lamps/luminaire x Lumens/Lamp x CU x LLF) (50 X 540)/(4 X 2950 x 0.386 x 0.52) = 11.4 luminaires

  26. Example 1 Goal is 50 fc +/- 10%  45-55 fc Luminaires E (fc) 10 43.9 x 11 48.2 ok  2 rows of 4, 1 row of 3 12 52.6 ok  3 rows of 4 13 57.0 x Verify S/MH for fixture, space geometry

  27. Example 1: S/MH Ratio Verify S/MH ratio MH=12.0-2.5=9.5’ S/MH = 1.0  S ≤ 9.5’ S: T.15.1 p. 631

  28. Example 1: Spacing S/2 S S S/2 Try 3 rows of 4 luminaires S/2+3S+S/2=20  S=5’ S/MH=5/9.5 ≤ 1.0ok S/2+S+S+s/2=27  S=9’ S/MH=9/9.5 ≤ 1.0 ok S/2 S S S S/2 27 20

  29. Example 1: Spacing S/2 S S S S/2 Try 4 rows of 3 luminaires S/2+2S+S/2=20  S=6.67’ S/MH=6.67/9.5 ≤ 1.0ok S/2+3S+s/2=27  S=6.75’ S/MH=6.75/9.5 ≤ 1.0 ok S/2 S S S/2 27 20

  30. Example 2 Economic Analysis

  31. Example 2: Economic Analysis Operation: 8AM-5PM, M-F, 52 wks/yr 9 x 5 x 52 = 2,340 hrs/yr Operating Energy: 128 watts/luminaire Lighting Control: Daylighting sensor with 3- step controller

  32. Example 2: Economic Analysis Connected Lighting Power (CLP): CLP=12 x 128= 1,536 watts (2.8 w/sf) Adjusted Lighting Power (ALP): ALP=(1-PAF) x CLP

  33. Example 2: Economic Analysis Power Adjustment Control Factor (PAF) Daylight Sensor (DS), 0.30 continuous dimming DS, multiple-step dimming 0.20 DS, On/Off 0.10 Occupancy Sensor (OS) 0.30 OS, DS, continuous dimming 0.40 OS, DS, multiple-step dimming 0.35 OS, DS, On/Off 0.35 Source: ASHRAE 90.1-1989

  34. Example 2: Economic Analysis Adjusted Lighting Power (ALP): ALP=(1-PAF) x CLP ALP=(1-0.20) x 1536 ALP= 1229 watts (2.3 w/sf)

  35. Example 2: Economic Analysis Energy = 1,229 watts x 2,340 hrs/yr =2,876 kwh/year Electric Rate: $0.081/kwh Annual Energy Cost = 2,876 kwh/yr x $0.081/kwh = $232.94/yr

  36. Example 2: Economic Analysis An alternate control system consisting of a daylighting sensor, with continuing dimming and an occupancy sensor can be substituted for an additional $150. Using the simple payback analysis method, determine if switching to this control system is economically attractive.

  37. Example 2: Economic Analysis Power Adjustment Control Factor (PAF) Daylight Sensor (DS), 0.30 continuous dimming DS, multiple-step dimming 0.20 DS, On/Off 0.10 Occupancy Sensor (OS) 0.30 OS, DS, continuous dimming 0.40 OS, DS, multiple-step dimming 0.35 OS, DS, On/Off 0.35 Source: ASHRAE 90.1-1989

  38. Example 2: Economic Analysis Adjusted Lighting Power (ALP): ALP=(1-PAF) x CLP ALP=(1-0.40) x 1536 ALP= 922 watts (1.7 w/sf)

  39. Example 2: Economic Analysis Energy = 922 watts x 2,340 hrs/yr = 2,157 kwh/year Annual Energy Cost = 2,157 kwh/yr x $0.081/kwh = $174.72/yr Annual Savings = 232.94 – 174.72= $58.22/year Simple Payback = Additional Cost/Annual Savings = 150.00/58.22 = 2.6 years < 3 years Economically attractive

  40. Example 3 Point Source Calculation

  41. S: F.20.58 p.1266 Example 3 Spot Lighting – lamp straight down S: F.15.48 p. 667

  42. S: F.20.58 p.1266 Example 3 Spot Lighting – lamp pointed at object Cp at 90 = 9600 Horizontal illumination= 9900(0.643)3 = 25.5 fc102 Vertical illumination= 9900(0.766)3 = 30.3 fc122 S: F.15.48 p.667

More Related