HD-F/L Series

1. HD-F/L Series Linear Fiber Laser

2. Optional Equipment • 2 & 3 kw IPG Fiber Resonators • Transverse Mounted Scrap Conveyor • Automation • Siemens Linear Motion System • CadCam Software Standard Equipment Capacities • Siemens 840D CNC Controller • CE safety equipment • Central lubrication • Scrap collector • Special laser cutting options • Laser source (resonator) • High pressure cutting option (25 Bar) • Tropical Level Cooling unit • Shuttle Table (automatic pallet changer) • Two Cutting Heads: 5” for 1-3kw, • 7.5” for 4kw • Dust Collection Filtration • Sharp Corner overheat protection (speed-power modulation) • Fast follow property of the head for high precision • Simple user interface parameter page (power-speed-pressure combination) • Sheet identification and detection system (ref. point) • Exchangeable Lens Holder System for Different Focal Lengths (1.5” lens) • Under Table Small Part & Scrap Conveyor • 5’ x 10’ • 6’6” x 13’ • 6’6” x 20’ • 8’ x 40’ • 2, 3 & 4 kw

3. Optional Equipment • 2 & 3 kw IPG Fiber Resonators • Transverse Mounted Scrap Conveyor • Automation • Siemens Linear Motion System • CadCam Software Standard Equipment Capacities • Siemens 840D CNC Controller • CE safety equipment • Central lubrication • Scrap collector • Special laser cutting options • Laser source (resonator) • High pressure cutting option (25 Bar) • Tropical Level Cooling unit • Two cutting heads: 5”, 7.5” • Dust Collection Filtration • Sharp Corner overheat protection (speed-power modulation) • Fast follow property of the head for high precision • Simple user interface parameter page (power-speed-pressure combination) • Sheet identification and detection system (ref. point) • Exchangeable Lens Holder System for Different Focal Lengths (1.5” lens) • Under Table Small Part & Scrap Conveyor • 5’ x 10’ • 1 or 2 kw

4. Laser Production Facility A 1,350,000 square foot facility was constructed in 2008 to produce lasers, turret presses and plasma cutting machines. Flying Optics Concept In this concept, the raw sheet rests on the cutting table and the laser head moves in both X and Y direction. The frame and the gantry are welded and then stress-relieved to eliminate deviations in the overall structure that can occur during the welding process. All moving axis are driven by dynamic low inertia and high performance and maintenance free AC servo motors. Precise helical rack-pinion gears guarantee silent and non-vibrating movement. This manufacturing process along with a direct mounted encoder measuring system generates high speed cutting without a loss of precision or cut quality.

5. Siemens Drive Systems Siemens Direct Drive Rack & Pinion (HD) The stable construction concept allows extremely high acceleration values. The axes are driven by dynamic low moment of inertia and high performance Siemens AC servo motors that require no maintenance. There are no intermediate load transmitting elements between the motor and the pinion, which otherwise could cause loss of precision. High precision two-way, hardened helical racks with low running clearance make it possible to achieve very high acceleration and speeds of 3,970 ipm.

6. Siemens Drive Systems Siemens Linear Motion System (HDL) • A unique design patented by Siemens, the water cooled, IP23-rated 1FN3 allocates the winding and magnets at the primary part, while the track the motor is traveling on consists of simple steel and does not carry the magnets. The advantages of this design are: • Lower costs for long traveling distances • No magnetic attraction at the track • Faster acceleration and deceleration and speeds • Better positioning accuracy

7. Features Shuttle Table The electric-powered shuttle table is fast, robust and easy to adjust. It has low power consumption, no hydraulics and low maintenance. The table is easily accessible from four sides, with ergonomic manual loading and unloading.

8. Features Intelligent Auto Focus Capacitance Cutting Head • The HP SSL head, being designed for high cutting speeds, is mechanically rugged and provides a stable signal for the distance sensors, thus enabling high cutting speeds to be achieved. • Efficient • High cutting speeds with integrated distance sensors • Short conversion times with fast changing of focal lengths • Optimized cutting gas flow • Flexible • Cutting of different material thicknesses • 2D cutting • Focal lengths tailored to your application • All media connections located in upper part • User Friendly and Safe • Simple and safe cartridge replacement system with TCP retention • Motorized focal position adjustment • Fast change of protective glass and attendance check of protective glass cartridge • Temperature monitoring of the sensor insert • Focal length detection by coding • Magnetic breakaway coupling • Electronics by Lasermatic

9. Features Fume Extraction System • Efficient fume extraction by means of shutters which are controlled in accordance with cutting head position results in more efficient use of the filtration system. Therefore a smaller, lower cost system can be used. • Six fume extraction zones deliver improved suction flow design. • Smaller air flow from dust collector • Low electrical consumption • Smoke and dust free machining area

10. Features Safety & Protective Measures The laser cutting system, machine and CNC controller are equipped with safety devices. These switches and sensors, on one hand, protect the operator from hazards, and on the other hand, counteract damage to the system. For example, incorrect path measurement programming or collision between the workpiece and the machine. A diagnosis system keeps the operator informed about the current status of the system and allows him to intervene in the dialogue to make corrections that remedy these faults. The steps required for the solution appear as plain text on the controller screen. The working area is guarded by light guards. These guards can be interrupted to gain free access for: inserting a new sheet, lens and nozzle replacement, general maintenance and for other special purposes. During the laser cutting operation the safety devices are electromagnetically locked, in order to prevent an accidental triggering of the machine’s EMERGENCY STOP function. The machine’s safety equipment corresponds to the CE guidelines currently in force. The laser head is guarded along the Y axis by flexiglass material which allows clear vision for the cutting area.

11. Features Automatic Sheet Position Locator Chiller • Used to cool the laser source, mirrors and the cutting head. For quality cutting it is necessary that the temperature of all the equipment used in beam delivery is very stable. Cooling also directly affects and increases the life of consumable parts. Proper cooling allows the mirrors, lens and nozzles to be used longer. • Limitation of power consumption by the use of energy saving techniques • Closed circuit system – no possibility of calcium deposits • Flexible adjustment of water temperature and pressure • Reduction of water costs to zero • Infinitely variable additional speed control • Vibration free, low noise, high efficiency scroll compressor • Silent running condenser and casing • Liquid cooled, seal free, non-wearing pumps The software includes a sheet locator feature that allows taking highly accurate references on the sheet metal position on the table, via a capacitive sensor. If the sheet position is different from the theoretical one, the part program must be adapted to the real position. Stress Relieved Both the mainframe and gantry are stress relieved after the welding process to eliminate deviations in metal geometry that can occur during the welding process.

12. Fiber Laser Advantage Diode Pump Fiber Laser vs Slab CO2 Laser Less moving parts creates more efficiency and reduced maintenance

13. Fiber Laser Advantage High Beam Quality Smaller focus diameter with better Beam Parameter Product (BPP). Fiber laser can be focused to a spot the size of 1/10th the diameter of the CO2 laser. The difference in brightness results in 100 times higher power density at the workpiece. Therefore cutting capacities between a CO2 and Fiber resonator should not be compared on a 1:1 (1kw fiber laser cuts as fast as 3kw CO2 in the range of .118-.196” stainless steel). Cutting thick materials from .590”/15mm up to .787”/20mm, the laser power has to be increased to cut the same speed as a lesser capacity fiber laser. Smaller focus can produce higher power density or a longer focus length, which makes the process more stable. Moreover, the operating wavelength of around 1 nanometer gives at room temperature about 7 times higher absorption in metals as 10.6 nanometers. Low reflection makes it easier to cut materials such as brass and copper. Smaller and lighter optics can be used (30mm diameter lens, 37.6mm at CO2) Transmission of the laser beam through fiber cable versus mirrors and beam path concept of the CO2, increase efficiency and eliminate maintenance

14. Fiber Laser Advantage

15. Fiber Laser Advantage IPG Fiber Laser The dynamic operating range of IPG’s low-order-mode kilowatt class fiber lasers is available from 10% to full power with no change in beam divergence or beam profile throughout the entire range. This allows a single laser to be utilized for both high and low power applications. IPG lasers’ divergence specifications are far superior than other lasers and allow the use of long focal length processing lenses for vastly improved depth of field, less damage to optical components. The units can be supplied with fiber lengths to 330 feet, different fiber diameters. Fiber lasers have a monolithic, entirely solid state, fiber-to-fiber design that do not require mirrors or optics to align or adjust, and are typically smaller and lighter in weight than traditional lasers, saving valuable floor space.

16. Low Cost Operation Space Savings Energy Savings In the case of an average cost of $33 per square foot, the annual savings is approximately $1,200 for the resonator, electrical box and chiller. Fiber Laser consumes 40.8kw less electricity per hour. Assuming 1 kwh = $0.119, and the machin operates 5,000h/year, Fiber electricity consumption is $23,800 less yearly. Energy costs of 4kw Fiber Laser at nominal power is less than the standby costs of CO2 Laser (4kw). The efficiency of fiber laser corresponds to the requirements for “Green Laser Power.” An efficiency of >30% is common for the advanced IPG Fiber Laser technology. Consumable Savings The fiber laser is maintenance free in contrast to the CO2 Laser. There are no parts which have to be replaced permanently and regularly, like laser tubes, vacuum pumps, output couplers, ventilators or laser gases.

17. Low Cost Operation

18. Control Unit Siemens 840D Series Control • The Siemens 840D control is an open architecture design allowing for the integration of all types of sheet metal processes. Several additional features are: • 15” color display • 40GB replaceable hard disk and memory stick • Ethernet port for network connection • Remote diagnostics • Cutting library with parameters for cutting steel, stainless, aluminum and steel • “FlyCut” feature allows not interrupting the beam-reducing work piece cycle time • Direct importation of CAD drawing and files • Laser power is automatically adjusted according to cutting speeds • Machine can start from cutting interruption point after power loss • User-friendly operator control • Easy operation using an integral keyboard and mouse • USB stick fully supported • Ethernet (100Mbps) allows connections to the corporate network and ease of program loading from offices

19. Control Unit CadCam Nesting Software • Nesting software is available and includes: parametric macro shapes, direct CAD-DXF input, true automatic nesting and re-nesting, remnant tracking, bridging and chain to reduce multiple pierces, real time statistics, remote control. A user-friendly design can be used effectively even with inexperienced operators. Parameter adjustments, programming and programs are easily stored and ready to be used. The memory capacity is virtually unlimited and popular material types and thicknesses, as well as cutting methods, are loaded by default. Advanced technology combines design, nesting, efficient NC generation, graphic simulation and detailed data reports. Laser cutting technology supports: • part library for standard shapes • automatic cutting with corner treatment • contour check and correction • beam width definition and auto compensation • corner loops and corner slow down • open contour cutting • rapid tool-path crash avoidance • tool-path optimization with auto entry point • marking before cutting options • true-type font cutting and engraving • Common line cutting • Automatic cutting direction (CW/CCW)

20. Optional Features Automation Both semi-automatic and FMS style automation systems are available. Several available concepts are shown, including compact automation (right).

21. Optional Automation

22. Optional Automation

23. Optional Automation

24. Optional Automation

25. Optional Automation Only vacuum table moves down; Fork table is fixed

26. Optional Automation Telescopically Guided Vacuum Lift

27. Optional Automation Vacuum Table The vacuum table has connection points to stabilize forks when simultaneously positioning the vacuum table and forks.

28. Load / Unload Sequence Click the image to view an animation of the load/unload sequence.

29. Load/ Unload Specifications & Features • Sheet Detection Device to Avoid Loading of More Than One Sheet at a Time • Available for 5’ x 10’ – 6’ x 13’ – 6’ x 20’ Models • Machine and Automation Controlled by Single Siemens 840 Controller • Ready for Adaptation of Tower • Mobile Raw Material Load Table • Specifications are approximate and subject to change without notice

30. Optional Features Transverse Conveyor Dust Collection & Filtration A small parts and scrap conveyor can be mounted at a right angle to the under-table conveyor to further the discharge. • Elimination of dust, particles and harmful fumes generated during cutting: • Intelligent control by Siemens • Self-cleaning and easy disposal • Free contacts for external control • Integrated fan • Dust load dependent automatic filter cleaning • Siemens CPU and PTFE membrane filter cartridges

31. Optional Features Lateral Scrap Conveyors Three optional lateral scrap conveyors feature easy access, easy maintenance and low electrical consumption. Slide drawers are standard.

32. Optional Features Lateral Scrap Conveyors Three optional lateral scrap conveyors feature easy access, easy maintenance and low electrical consumption. Slide drawers are standard.

33. Learn More Videos Playlist (7 videos) Articulating Head Automated Pole Manufacturing System IPG CAD/CAM Software Datasheets View Online Printer-Friendly Version

34. Durma Aims for Continuous Development DURMA’s large investment in machining centers and production equipment, as well as its ISO-certified factories totaling 1,350,000 square feet and 1,000 employees, make one of the world’s largest, efficient and most contemporary facilities in the world. In order to offer customer solutions and further develop patents, the DURMA Research and Development center opened in 2010. Fifty engineers were added over the last two years. Designed and engineered with modern technology, DURMA products are equipped with high quality and proven readily available components. Established in 1956, DURMA has vast experience in building and supplying quality products. With over 60,000 machines delivered worldwide, DURMA has earned the reputation as a supplier of innovative, “value oriented” solutions. Your partner today, tomorrow and forever.