1 / 12

How to Remove Old 3M Invisible Paint Protection Film (Clear Bra) from a Car

Envious Detailing provides best-in-class auto detailing services for every client with needs from clear bras to window tints as we believe in the quality.

enviousdetailing
Download Presentation

How to Remove Old 3M Invisible Paint Protection Film (Clear Bra) from a Car

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to Remove Old 3M Invisible Paint Protection Film (Clear Bra) from a Car

  2. 1. Test An Area Of The Film With The Scraper Be sure not to use a metal scraper as it could scratch the paint finish. You may use some auto trim tools that are made of poly/nylon and are safe for the paint surface. Gently stick the edge of the scraper underneath the edge of the film and push against the film to see how easily it will come off .

  3. 2. If You Only Get Little Tiny Pieces At A Time, Then The Best Way Is Using Heat Gun, Heat Up A Small Section Of The Film Do not get the heat gun too close to the car, 8–12 inches (20.3–30.5 cm) will work best. Hold the heat gun on the section for about a minute or two. If the film comes off fairly easily and in large strips a heat gun may not be necessary but would help.

  4. 3. Using The Scraper Again, Gently Push Underneath The Film Of The Heated Area And The Film Should Now Come Up In Bigger Strips • It is Okay and normal for to not get everything off in each pass. • As long as you get the top layer of the film off the rest will come off easily with Goo Gone adhesive remover.

  5. 4. Work In Small Sections At A Time Repeating The Process Of Heating Then Scraping You will know when you need to heat again as the strips being removed will get smaller. This process will take some time so patience is a must!

  6. 5. Have Adhesive Left Behind • Gently rub over the area on the car where the adhesive is. • Work in small sections and spray more Goo Gone on the towel as needed. Rub over the areas until the adhesive has been removed. The plastic scraper can also help on this step.

  7. 6. Optional step If you wish to be very certain you have removed all the adhesive, or get tired of trying to get every little piece, a clay bar kit is the answer. Spray down a small area, 2x2, and then rub the clay bar over it.

  8. Want big impact? Use big image. WE BELIEVE IN EXCELLENCE

  9. 7. When All The Adhesive Has Been Removed, Wipe The Entire Area Down With Another Dry Microfiber Towel.

  10. 8. Using Your Car Wax Of Choice, Wax The Entire Area Of The Car Where The Invisible Shield Was.

  11. 9. Sit Back And Enjoy Your Work!

  12. THANKS! FOR MORE INFORMATION Visit Envious Detailing You can find me at: enviousdetailing@gmail.com

More Related