1 / 33

Standard Solar Models I Aldo Serenelli Institute for Advanced Study, Princeton

Standard Solar Models I Aldo Serenelli Institute for Advanced Study, Princeton. SUSSP61: Neutrino Physics - St. Andrews, Scotland – 8 th to 23 rd , August, 2006. John N. Bahcall (1934-2005). Plan. Lecture 1 Motivation: Solar models – Solar neutrinos connection Stellar structure equations

enye
Download Presentation

Standard Solar Models I Aldo Serenelli Institute for Advanced Study, Princeton

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Standard Solar Models IAldo SerenelliInstitute for Advanced Study, Princeton SUSSP61: Neutrino Physics - St. Andrews, Scotland – 8th to 23rd, August, 2006

  2. John N. Bahcall (1934-2005)

  3. Plan Lecture 1 • Motivation: Solar models – Solar neutrinos connection • Stellar structure equations • Standard Solar Models (SSM) - setting up the problem • Overview of helioseismology • History of the SSM in 3 steps Lecture 2 • SSM 2005/2006 • New Solar Abundances: troubles in paradise? • Theoretical uncertainties: power-law dependences and Monte Carlo simulations • Summary

  4. Motivation • The Sun as a paradigm of a low-mass star. Standard test case for stellar evolution. Sun is used to callibrate stellar models • Neutrinos from the Sun: only direct evidence of solar energy sources (original proposal for the Homestake experiment that led to the Solar Neutrino Problem) • Neutrino oscillations: onstraints in the determination of LMA solution. However, SNO and SK data dominate  importance of SSM minor

  5. Motivation • Transition between MSW effect and vacuum oscillations at ~5 MeV. 99.99% of solar neutrinos below 2 MeV: additional neutrino physics at very low energies? • Direct measurements of 7Be (pep, pp?) (Borexino, KamLAND, SNO+) key to astrophysics. Check the luminosity constraint • Future measurement of CNO fluxes? Answer to Solar Abundance Problem?

  6. What is inside a Standard Solar Models?Stellar structure – Basic assumptions • The Sun is a self-gravitating object • Spherical symmetry • No rotation • No magnetic field

  7. 1D Euler equation – Eulerian description (fixed point in space) Numerically, Lagrangian description (fixed mass point) is easier (1D) here m denotes a concentric mass shell and using and Euler equation becomes Stellar structure – Hydrostatic equilibrium 1/2

  8. Hydrodynamic time-scale thydr: thydr << any other time-scale in the solar interior: hydrostatic equilibrium is an excellent approximation (1) Stellar structure – Hydrostatic equilibrium 2/2

  9. (2) Stellar structure – Mass conservation We already used the relation leading to

  10. Lmis the energy flux through a sphere of mass m; in the absence of energy sources where Additional energy contributions (sources or sinks) can be represented by a total specific rate e (erg g-1 s-1) Possible contributions to e: nuclear reactions, neutrinos (nuclear and thermal), axions, etc. Stellar structure – Energy equation 1/2

  11. (3) In the present Sun the integrated contribution of eg to the solar luminosity is only ~ 0.02% (theoretical statement) Solar luminosity is almost entirely of nuclear origin  Luminosity constrain: Stellar structure – Energy equation 2/2 In a standard solar model we include nuclear and neutrino contributions (thermal neutrinos are negligible): e = en– en (taking en > 0)

  12. If D is the diffusion coefficient, then the diffusive flux is given by c is the speed of light and a is the radiation-density constant and U is the radiation energy density. and in the case of radiation and where In 1-D we get Stellar structure – Energy transportRadiative transport 1/2 Mean free path of photons lph=1/kr (k opacity, r density) Typical values k=0.4cm2g-1, r=1.4 g cm-3  lph2cm lph /R8310-11  transport as a diffusion process

  13. The flux F and the luminosity Lm are related by and the transport equation can be written as or, in lagrangian coordinates Using the hydrostatic equilibrium equation, we define the radiative temperature gradient as and finally (4) Stellar structure – Energy transportRadiative transport 2/2

  14. r+Dr: P+DP, T+DT, r+Dr b Adiabactic displacement s s r: P, T, r b Stability condition: Using hydrostatic equilibrium, and Stellar structure – Energy transportConvective transport 1/3

  15. Divide by and get Schwarzschild criterion for dynamical stability When does convection occur? large Lm (e.g. cores of stars M*>1.3M8) regions of large k (e.g. solar envelope) Stellar structure – Energy transportConvective transport 2/3

  16. where is the actual temperature gradient and satisfies Fconv and  must be determined from convection theory (solution to full hydrodynamic equations) Easiest approach: Mixing Length Theory (involves 1 free param.) Energy transport equation (4b) Stellar structure – Energy transportConvective transport 3/3 Using definition of and we can write and, if there is convection: F=Frad+Fconv

  17. The chemical composition of a star changes due to Relative element mass fraction: • Convection • Microscopic diffusion • Nuclear burning • Additional processes: meridional circulation, gravity waves, etc. (not considered in SSM) X hydrogen mass fraction, Y helium and “metals” Z= 1-X-Y Stellar structure – Composition changes 1/4

  18. Microscopic diffusion (origin in pressure, temperature and concentration gradients). Very slow process: tdiff>>1010yrs here wi are the diffusion velocities (from Burgers equations for multicomponent gases, Burgers 1969) Dominant effect in stars: sedimentation H Y & Z  Convection (very fast) tends to homogenize composition where Dconv is the same for all elements and is determined from convection treatment (MLT or other) Stellar structure – Composition changes 2/4

  19. Stellar structure – Composition changes 3/4 Nuclear reactions (2 particle reactions, decays, etc.) here (v) is the relative velocity distrib. and s(v) is cross section Sun: main sequence star  hydrogen burning low mass  pp chains (~99%), CNO (~1%) Basic scheme: 4p  4He + 2b+ + 2ne+ ~25/26 MeV

  20. Q=1.44 MeV, <Qn>=0.265 pp neutrinos Q=Qn=1.44 pep neutrinos Q=5.49 Q=12.86 ppI 88-89% Q=1.59 Q=Qn=0.86 (90%)-0.38 (10%) Q=17.35 7Be neutrinos ppII 10% Q=0.137 8B neutrinos Q=17.98, <Qn>=6.71 Marginal reaction: ppIII 1% Q=19.795, <Qn>=9.625 hep neutrinos Interlude on hydrogen burning – pp chains

  21. Q=1.94 Q=2.22, <Qn>=0.707 13N neutrinos CN-cycle Q=7.55 Q=7.30 Q=2.75, <Qn>=0.996 13N neutrinos Q=4.97 Q=12.13 Q=0.600 NO-cycle Q=2.76, <Qn>=0.999 17F neut. Q=1.19 Interlude on hydrogen burning – CNO cycle CNO cycle is regulated by 14N+p reation (slowest)

  22. Stellar structure – Composition changes 4/4 Composition changes i=1,…..,N (5)

  23. (1) (2) (3) (4) (5) Stellar structure – Complete set of equations Microscopic physics: equation of state, radiative opacities, nuclear cross sections

  24. Standard Solar Model – What we do 1/2 Solve eqs. 1 to 5 with good microphysics, starting from a Zero Age Main Sequence (chemically homogeneous star) to present solar age

  25. Construct a 1M8 initial model with Xini, Zini, (Yini=1- Xini-Zini) and aMLT, evolve it during t8 and match (Z/X)8, L8 and R8 to better than one part in 10-5 Standard Solar Model – What we do 2/2 3 free parameters: • Convection theory has 1 free parameter:aMLT determines the temperature stratification where convection is not adiabatic (upper layers of solar envelope) • 2 of the 3 quantities determining the initial composition: Xini, Yini, Zini (linked by Xini+Yini+Zini=1). Individual elements grouped in Zini have relative abundances given by solar abundance measurements (e.g. GS98, AGS05)

  26. Standard Solar Model – Predictions • Eight neutrino fluxes: production profiles and integrated values. Only 8B flux directly measured (SNO) so far • Chemical profiles X(r), Y(r), Zi(r)  electron and neutron density profiles (needed for matter effects in neutrino studies) • Thermodynamic quantities as a function of radius: T, P, • density(r), sound speed(c) • Surface heliumYsurf (Z/X and 1=X+Y+Z leave 1 degree of freedom) • Depth of the convective envelope, RCZ

  27. Discovery of oscillations: Leighton et al. (1962) • Sun oscillates in > 105 eigenmodes • Frequencies of order mHz (5-min oscillations) • Individual modes characterized by radial n, angular l and longitudinal m numbers The Sun as a pulsating star - Overview of Helioseismology 1/4

  28. The Sun as a pulsating star - Overview of Helioseismology 2/4 • Doppler observations of spectral lines: velocities of a few cm/s are measured • Differences in the frequencies of order mHz: very long observations are needed. BiSON network (low-l modes) has data collected for  5000 days • Relative accuracy in frequencies 10-5

  29. The Sun as a pulsating star - Overview of Helioseismology 3/4 • Solar oscillations are acoustic waves (p-modes, pressure is the restoring force) stochastically excited by convective motions • Outer turning-point located close to temperature inversion layer. Inner turning-point varies, strongly depends on l (centrifugal barrier) Credit: Jørgen Christensen-Dalsgaard

  30. Oscillation frequencies depend on r, P, g, c • Inversion problem: using measured frequencies and from a reference solar model determine solar structure Output of inversion procedure:dc2(r), dr(r), RCZ, YSURF Relative difference of c between Sun and BP00 The Sun as a pulsating star - Overview of Helioseismology 4/4

  31. Step 2. Precise calculations of radiative opacities (OPAL group). Helioseismology: results from low and mid-l sample well the solar interior (1995-1997). • SSM correct in solar interior to better than 1% Bahcall et al. 1996 History of the SSM in 3 steps • Step 1. Predictions of neutrino fluxes by the SSM to high (factor 2.5/3) w.r.t. to radiochemichal experiments: solar neutrino problem. 8B flux too sensitive to central temperature (8B)T20-25. Problem with SSM? Specultive solutions of all kinds. This lasted about 30 years.

  32. Step 3. The BP00 model and Sudbury Neutrino Observatory BP00: Bahcall, Pinsonneualt & Basu (2001) History of the SSM in 3 steps RCZ=0.714 / 0.713 ± 0.001 YSUP=0.244 / 0.249 ± 0.003 F(8B)= (5.05 ± 0.91) x 106 cm-2 s-1 FSK(8B)= (2.32 ± 0.09) x 106 cm-2 s-1 (only sensitive to ne)

  33. SNO collaboration (2002) FBP00(8B)/ FSNO(8B)= 0.99 Solution to the Solar Neutrino Problem !!!! History of the SSM in 3 steps • Step 3. SNO: direct measurement of the (8B) flux.

More Related