20 likes | 72 Views
A cable tray is used to support power cables and control cables for outdoor and indoor applications. There are several manufacturers across the globe providing premium range of cable trays to their customers.
E N D
FRP is a reinforced material, which implies you convert a material into fiberglass and make several products like cable trays, FRP storage tanks, silos, etc. FRP products manufacturers have intended this post to explain the structural characteristics of cable tray. A cable tray is used to support power cables and control cables for outdoor and indoor applications. There are several manufacturers across the globe providing premium range of cable trays to their customers. You can avail the best cable trays of FRP material from such suppliers in your town. These cable trays are safe, robust, durable, and cost effective solutions for supporting and routing cables. When you see any cable tray in installed condition, you won’t see any issue in performance as beam under the system uniformly distributed load. There are usually four bam configurations you will found in a cable tray installation. These are simple beam, continuous beam, cantilever beam, and fixed beam.
You must remember that cable tray is intended by experts to support power cables and you cannot use them as a walkway for personnel. Cable load is simply the total weight of the bundle of cables that are required to be placed in the system. Cable load should be expressed in lbs. /ft. Concentrated load is a static weight applied between the side rails. Conduit attachments, tap boxes, and long cable drops are a few of several types of concentrated loads. Wind loads need to be determined for every cable tray installed at outdoor. For outdoor installations, ladder cable trays are often used. And when covers are installed on outdoor cable trays, aerodynamic effect can produce a lift stronger to separate a cover from the cable tray. Ice loads are usually experienced when there is rain or freezing. Usually the top surface and the windward side of a cable tray system are coated with ice. Snow loads are determined by using snowfall records from the local and federal weather bureaus. For more details on cable trays, you can speak to the manufacturers in your local any time. In this post, you have read about the structural characteristics of the cable trays. All the information shared in this post belongs to EPP frp cable tray manufacturer. If you have any question, you can ask in comments below. This Article is Originally Published on: https://onmogul.com/stories/frp-products-manufacturers-explaining-structural-characteristics-of-cable-tray