1 / 17

MC B1 Inspection

MC B1 Inspection. MTM data: 65708-1 FIDUCIALS.IGS 65708-1 DATA.IGS. Pro/E model: b1_mtm_data_check.asm. 9/26/06. Profile of M to MI: 114 point are OOT. Max + = 0.0129” OOT Max - = -0.0152” OOT. M-M1 SIDE-A OOT. .013. M-M1 SIDE-A OOT. .015. N-N1 SIDE-B OOT. .022.

erica
Download Presentation

MC B1 Inspection

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MC B1 Inspection MTM data: 65708-1 FIDUCIALS.IGS 65708-1 DATA.IGS Pro/E model: b1_mtm_data_check.asm 9/26/06

  2. Profile of M to MI: 114 point are OOT. Max + = 0.0129” OOT Max - = -0.0152” OOT

  3. M-M1 SIDE-A OOT .013

  4. M-M1 SIDE-A OOT .015

  5. N-N1 SIDE-B OOT .022 Profile of N to NI: 93 point are OOT. Max + = 0.022” OOT Max - = -0.0167” OOT

  6. Type-B wing Type-A wing pocket MC Type-A to Type-B large wing interface clearance is 0.378” in the CAD model.

  7. SIDE-A OUTER WING -.12/-.25 -.074 / -.086 -.062 / -.088 +.092 / +.098 -.006 / -.025 +.009 / +.036 +.023 / +.039 MC Type B Wing – Flange D Side: The machine surface is acceptable.

  8. SIDE-A INNER POCKET +0 / -.12 MC Type-A to Type-B large wing pocket interface clearance is 0.358” in the CAD model.

  9. In general most area has a negative surface cut except where noted. See next slide for MTM data. +.111 +.093 +.023 .001 .084 .114 Surface data measures slightly different for MTM data. I assume due to shift caused by best fit. .096 .115 -.145 -.107 MC Type B Wing Pocket – D Side: The machine surface is acceptable.

  10. MTM inspection data for MC Type B Wing Pocket – Flange D Side

  11. MC Type-A to Type-B small wing pocket interface clearance is 0.445” in the CAD model.

  12. +0.38 +0.033 +0.041 +0.117 +0.214 +0.217 +0.218 +0.217 +0.208 +0.195 +0.087 Pocket 2 Flange D Side Surface data measures slightly different for MTM data. I assume due to shift caused by best fit. MTM inspection data

  13. 0.32” minimum clearance to nominal CAD surface. MC Type-A to Type-B small wing pocket: The machine surface is acceptable.

  14. MC Type-C to Type-B large wing pocket minimum interface clearance is 0.249” in the CAD model.

  15. -.020 / -.936 Nominal part thickness remaining is 2.48” -.229 -.071 -.670 -.936 -.081 -.730 -.621 -.74 -.020 -.086 -.052 / -.115 Pocket E Side: All negative surface values. The machine surface is acceptable.

  16. Point offset is .459”. OOT by 0.25” Point offset is .316”. OOT by 0.065” Surface acceptable PROFILE OF INSIDE CAST D SIDE

  17. WE COULD NOT FIND FLANGE SURFACE DATA

More Related