1 / 30

CHEM 521 Safety Presentation

CHEM 521 Safety Presentation. Hazard Symbols You Must Know. Take Electricity Seriously. Over 30,000 non-fatal shocks occur each year. Over 600 deaths occur annually due to electrocution. . Source: Bureau of Labor Statistics. Electrical Accidents. Leading Causes of Electrical Accidents:

esme
Download Presentation

CHEM 521 Safety Presentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CHEM 521 Safety Presentation

  2. Hazard Symbols You Must Know

  3. Take Electricity Seriously • Over 30,000 non-fatal shocks occur each year. • Over 600 deaths occur annually due to electrocution. Source: Bureau of Labor Statistics

  4. Electrical Accidents • Leading Causes of Electrical Accidents: • Drilling and cutting through cables • Using defective tools, cables and equipment • Failure to maintain clearance distance of 10 feet • Failure to de-energize circuits and follow Lockout/Tagout procedures • Failure to guard live parts from accidental worker contact • Unqualified employees working with electricity • Improper installation/use of temporary electrical systems and equipment • By-passing electrical protective devices • Not using GFCI (ground fault circuit interrupters) devices • Missing ground prongs on extension cords

  5. Hazards of Electricity • Shock – Most common and can cause electrocution or muscle contraction leading to secondary injury which includes falls • Fires – Enough heat or sparks can ignite combustible materials • Explosions – Electrical spark can ignite vapors in the air • Arc Flash - can cause burns ranging from 14,000 degrees f. to 35,000 degrees f • Arc Blast – In a short circuit event copper can expand 67,000 times. The expansion causes a pressure wave. Air also expands adding to the pressure wave

  6. Fundamentals of Electricity • Electrical current is the flow of electrons through a conductor. • A conductor is a material that allows electrons to flow through it. • An insulatorresists the flow of electrons. • Resistance opposes electron flow.

  7. How Shocks Occur • Current travels in closed circuits through conductors (water, metal, the human body). • Shock occurs when the body becomes a part of the circuit. • Current enters at one point & leaves at another.

  8. Severity of the Shock • Severity of the Shock depends on: • Amount of current • Determined by voltage and resistance to flow • Path through the body • Duration of flow through the body • Other factors such as general health and individual differences.

  9. Effects of Current Flow • More than 3 milliamps (ma): painful shock • More than 10 ma: muscle contraction • More than 20 ma: considered severe shock • More than 30 ma: lung paralysis - usually temporary • More than 50 ma: possible ventricular fibrillation (usually fatal) • 100 ma to 4 amps: certain ventricular fibrillation (fatal) • Over 4 amps: heart paralysis; severe burns

  10. Electrical Isolation • We can be safe by keeping electricity away from us. We can: • Insulatethe conductors. • Example: The insulation on extension cords. • Elevatethe conductors. • Example: Overhead powerlines. • Guard the conductors by enclosing them. • Example: Receptacle covers, boxes, & conduit.

  11. Insulating the Conductors • The first way to safeguard workers from electrically energized wires is through insulation. • Rubber and plastic is put on wires to prevent shock, fires, short circuits and for strain relief. • It is always necessary to check the insulation on equipment and cords before plugging them in. • Remember, even the smallest defect will allow leakage!

  12. Defective Extension Cords Photos depict hazardous condition

  13. Defective Cord Incident • Worker attempted to climb scaffold with electric drill. • Drill’s cord was damaged with bare wires showing. • The bare wire contacted the scaffolding. • The worker died! Depicts hazardous condition

  14. Guarding the Conductors • The third way to safeguard workers from electrically energized wires is by guardingthem. • Covers, boxes, and enclosures are often put around conductors to prevent worker contact. • It is always necessary to check that electrical boxes and panels are covered and free from missing “knock-outs”. • Remember, electric equipment operating at 50 volts or more must be guarded! Photo depicts hazardous condition

  15. Guarding the Conductors Photos depict hazardous condition

  16. Guarding the Conductors Photos depict hazardous condition

  17. Equipment Grounding • We can be safe by providing a separate, low resistance pathway for electricity when it does not follow normal flow (ground prong). • Grounding gives the stray current somewhere to go and keeps you from becoming part of the circuit.

  18. Can You Rely on Grounding? • Grounding will not workif the electricity can flow through you more easily than the ground. This can happen when: • Your tool doesn’t have a ground pin. • You’re working in wet locations. • You’re touching a metal object.

  19. What Must be Grounded? • All circuits and extension cords. • All noncurrent carrying metal parts. • Portable & semi-portable tools and equipment unless double insulated.

  20. Do Not Eliminate the Ground! You become the next-best path for current! Photos depict hazardous condition

  21. Do Not Reverse Polarity The prongs are different sized so you can’t turn the plug around. If you do, the electrical fields within the motor are always energized. If there is moisture present, the case is likely to be “hot”. Even with double-insulated tools, you still could get a shock. Photo depicts hazardous condition

  22. Circuit Interruption • We can be safer by automatically shutting off the flow of electricity in the event of leakage, overload, or short circuit. • Ground Fault Circuit Interrupters (GFCI) are circuit protection (or “overcurrent”) devices that protect you, the worker. • Circuit breakers & fuses protect equipment, not you, because they take too much current & too much time to trip.

  23. Checking for Ground Continuity What else we should we notice here? Photo depicts hazardous condition

  24. Temporary Wiring • There must be separate circuits for electric tools and lighting, each labeled as such. • Light circuits do not require a GFCI. • Unless used in a wet location. • Test branch circuits before use. • Maintain vertical clearances. • Insulate wires from their supports.

  25. SUBPART Extension Cords and Cables • Must be in good shape without splices. • Cannot be secured with staples, nails or bare wire. • Must be protected from damage. • Must have a ground pin. • Should be inspected regularly and pulled from service if defective. • Cannot be repaired with electrical or duct tape. Must repair with heat-shrink sleeve or bonding/vulcanizing tape to retain original insulation properties. Photos depict hazardous condition

  26. Photo depicts hazardous condition

  27. Safe Work Practices • De-energized circuits and equipment must be locked/tagged out.

  28. SUBPART K 53 Safe Work Practices • No metal ladders for or near electrical work. • No wet hands when plugging or unplugging cords/equipment. • No raising or lowering tools by the cord. • Unless equipment is designed for it, cannot be used in damp and wet locations. Photo depicts hazardous condition

  29. SUBPART K 55 Summary – Hazards & Protections • Protective Measures • Proper grounding • Use GFCI’s • Use fuses and circuit breakers • Guard live parts • Lockout/Tagout • Proper use of flexible cords • Close electrical panels by Competent Person • Employee training • Ensure Competent Person on site • Use proper approved electrical equipment • Qualified person install electrical devices Hazards • Inadequate wiring • Exposed electrical parts • Wires with bad insulation • Ungrounded electrical systems and tools • Overloaded circuits • Damaged power tools and equipment • Using the wrong PPE and tools • Overhead power lines • All hazards are made worse in wet conditions • Damaged extension cords • Unqualified workers doing electrical work

More Related