1 / 10

TGW-100 Interfacing SCADA Applications to TETRA infrastructure July 2012

TGW-100 Interfacing SCADA Applications to TETRA infrastructure July 2012 Funk-Electronic Piciorgros GmbH Michael D. Piciorgros (CEO). Network Structures when using TETRA for SCADA applications: Radio to Radio Communication and SwMi to Radio Communication using a TGW-100 Gateway

essien
Download Presentation

TGW-100 Interfacing SCADA Applications to TETRA infrastructure July 2012

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TGW-100Interfacing SCADA Applications to TETRA infrastructure July 2012 Funk-Electronic Piciorgros GmbHMichael D. Piciorgros (CEO)

  2. Network Structures when using TETRA for SCADA applications: Radio to Radio Communication and SwMi to Radio Communication using a TGW-100 Gateway for SDS and Packet Data

  3. SCADA using based Radio-to-Radio Communication SDS Public Lighting Control Room Serial Interface TMO-100 SDS Serial Communication SDS SDS TMO-100 I/O Command and Control Line Device TMO-100 SDS Serial Interface AMR TMO-100 Tetra Switch

  4. Analyze one Polling Sequence M->ALL M->1 M->3 M->1 M->ALL M->ALL M->2 Master Rx_ALL 1->M 1->M Rx_ALL Outst._01 Rx_ALL Rx_ALL 2->M Outst._02 3->M Rx_ALL Rx_ALL Outst._03 Time Line Polling Sequence. Data is sent only to one receiver at a time Broadcast. All Units receive and act at the same time Timing does not fit to Scale

  5. Data Flow with Radio-to-Radio Communication Data received from the Outstation Polling Sequence. Data or Request from the Master device to the Outstation RS-232 RS-232 Master Uplink Downlink Tetra Uplink Downlink Tetra RS-232 RS-232 Outstation Time Line Time (typical): 2,5 to 3,5 Sec for about 20 Byte Polling Data and 150 Bytes answer from the Outstation Timing does not fit to Scale

  6. SCADA – using an SDS Gateway Public Lighting Control Room TMO-100 SDS Two Serial Interfaces SDS TGW-100SDS Gateway TMO-100 I/O Command and Control Line Device IP Communication SDS AMR TMO-100 Tetra Switch

  7. Data Flow with Gateway-to-Radio Communication Data received from The Outstation Polling Sequence. Data or Request to the Outstation RS-232 RS-232 Master Uplink Downlink Tetra RS-232 RS-232 Outstation Time Line Time (typical): 1 to 2 Sec for about 20 Byte Polling Data and 150 Bytes answer from the Outstation Timing does not fit to Scale

  8. SCADA – using an Gateway Packet Data Public Lighting Control Room Serial Interface TMO-100 PD TGW-100P Packet Data Gateway Two Serial Interfaces PD TMO-100 I/O Command and Control Line Device IP Communication PD Serial Interface AMR TMO-100 Tetra Switch

  9. SCADA – using direct Communication IP Public Lighting Control Room IP TMO-100 PD PD Direct IP Communication TMO-100 I/O Command and Control Line Device PD IP AMR TMO-100 Tetra Switch

  10. Thank you very much for your interest in our Products Funk - Electronic Piciorgros GmbH Claudiastr. 5 51145 Köln-Porz Germany www.piciorgros.com www.TetraModem.com

More Related