340 likes | 499 Views
Top Quark Properties and Search for Single Top Quark at the Tevatron. Meenakshi Narain Boston University Presented at EPS 2005. Top Quark at the Tevatron. 8.2 fb -1. Design. 5.1 fb -1. 4.1 fb -1. We are here. Base. Top quark discovered a decade ago (in 1995)! Run I (1992-1996)
E N D
Top Quark Propertiesand Search for Single Top Quarkat the Tevatron Meenakshi Narain Boston University Presented at EPS 2005
Top Quark at the Tevatron 8.2 fb-1 Design 5.1 fb-1 4.1 fb-1 We are here Base • Top quark discovered a decade ago • (in 1995)! • Run I (1992-1996) • s = 1.8 TeV • Integrated luminosity • 120 pb-1 • Run II (2001-present) • s = 1.96 TeV • 3 fold increase performance since June’03 • Integrated luminosity by June ‘05: • Delivered >1fb-1 • On tape ~800pb-1 • Analyzed up to ~350 pb-1 World’s only top factory!
Top Quark Physics • Top is very massive • It probes physics at much higher energy scale than the other fermions. • Top decays before hadronizing • momentum and spin information is passed to its decay products. • No hadron spectroscopy. • Top mass constrains the Higgs mass • Mtop, enters as a parameter in the calculation of radiative corrections to other Standard Model observables • it is also related, along with the mass of the W boson, to the that of the Higgsboson. Mtop (world average)= 172.7 2.9 GeV top ~ 10-24 sec
The Top Properties Tour Top Width Top Charge W helicity Top Spin Top Mass CP Violation Anomalous Couplings Production Kinematics Production X-Section Top Spin Polarization Resonance Production Y |Vtb| Rare/non SM decays Branching Fractions
Top Quark Decay Properties • Does top quark decay 100% of the times to Wb? • B(t Wb) • Search for exotic decay modes of the top quark • t H+b • Properties of the W-t-b vertex • W Helicity • Top quark Charge
Is B(t Wb) ~ 100%? • Within the SM, assuming unitarity of the CKM matrix, B(tWb)~1. • An observation of a B(tWb) significantly different than unity would be a clear indication of new physics: • non-SM top decay, non-SM background to top decay, fourth fermion generation,..
Measurement of B(tWb)/B(tWq) • B(tWb) can be accessed directly in single top production. Top decays give access to B(tWb)/B(tWq): • R can be measured by comparing the number of ttbar candidates with 0, 1 and 2 jets tagged. • In the 0-tag bin, a discriminant variable exploiting the differences in event kinematics between ttbar and background is used. In the SM Lepton+jets (~230 pb-1) Lepton+jets and dilepton (~160 pb-1) DØ Run II Preliminary hep-ex/0505091 Results consistent with the SM prediction
Exotic Decays of the top quark • Since R is about 1 • Top quark decays to a b-quark t X+b • Is X = W+ ? OR • could X =H+ ?. • as predicted by generic 2Higgs Doublet Models?
Search for tH+b • If MH±<mt-mb • then t H+b competes with t W+b • results in B(tWb)<1. • H decays are different than W decays • affect (tt) measurements in different channels (dileptons, lepton+jets, lepton+tau). • Perform simultaneous fit • to the observation in all channels and • determine model-dependent exclusion region in (tan, MH±).
Are the other Properties of the Top Quark as Expected?W-t-b Vertex: W helicityTop Charge
W helicity in Top quark Decays W-Left-Handed fractionF- W+ Right-Handed fraction F+ W0Longitudinal fraction F0 0 -1/2 +1 +1/2 +1/2 +1/2 W W b t t t b b W -1/2 +1 +1/2 • Large top quark mass: • Are there new interactions at energy scales near EWSB? • helicity of the W boson: • examines the nature of the tbW vertex • provides a stringent test of Standard Model V-A coupling gWtb |Vtb| (V-A) F0= 0.7 F-= 0.3 F+=0 V-A SUPPRESSED
W helicity • In the Standard Model (with mb=0): • The PT of the lepton has information about the helicity of the W boson: • longitudinal: leptons are emitted perpendicular to the W (harder lepton PT) • left-handed: leptons are emitted opposite to W boson (softer lepton PT) SM: F-= 0.3 F0= 0.7 F+=0 Left-handed Longitudinal Right-handed
W Helicity L=230 pb-1 hep-ex/0505031 • Likelihood analysis of PT spectrum • Consider dilepton channels • Fix F0=0.7, measure F+ (F-=1-F0-F+) • Binned likelihood and estimate F+ using Bayesian method Run I best (DØ 125 pb-1): F0=0.560.31 • Likelihood analysis of cos * • Consider lepton+jets channels • Fix F0=0.7, measure F+ (F-=1-F0-F+) • Two analysis: topological and b-tag Run I best (CDF 109 pb-1): F+<0.18 @ 95% CL Lepton+jets (1 b-tag) Results consistent with the SM prediction: F0=0.7, F+=0
Measurement of top quark Charge • Is it the Standard Model top ? OR • An exotic doublet of quarks (Q1, Q4) • with charges (-1/3,-4/3) and M ~ 175 GeV/c2 • while M(top) ~ 274 GeV/c2 • W.-F. Chang et al.,hep-ph/9810531 • q = -4/3 is consistent with EW data, • new b-couplings improve the EW fit • (E. Ma et al. , hep-ph/9909537)
Top Quark Charge Measurement • Goal: discriminate between • |Qtop| = 2e/3 and |Q”top”| = 4e/3 • Top quark charge is given by the sum of the charge of its decay products • Determine: • Charge of W (lepton) • Charge of b-jet Qjet = qi pTia/ pTia • (here, a=0.6) • Associate b-jets to correct W (charged lepton) • The charge of the quark is correlated with the charge of the highest pT hadron during hadronization
Top Quark Charge qB = b hadr. side qb = b lept. side qb = b lept. side qB = b hadr. side • We need an observable and an expectation for the ”2/3” and ”4/3” scenarios • Consider only lepton+jets double-tagged events • Two top quarks in the event measure the charge ”twice” • The exotic scenario is obtained by permuting the charge of the tagged jets • qb and qB are taken from the data derived jet charge templates • Results coming soon... qB qb qB qB qb
Top Quark Production Properties • Since top decay properties look quite consistent with SM predictions…. • What about its production? • Could it be a “t-prime”? • Search for t’t’ production (t’ Wq) • Could the ttbar pair originate from the decay of a resonance? • Model independent search for narrowresonance Xtt used to exclude a leptophobic X boson: • What about single top production? Run I search of X with G=1.2%M: MX>560 GeV @ 95% CL (DØ) and MX>480 GeV @ 95% CL (CDF)
Search for Single Top PRD 63, 014018 (2001) s-channel t-channel s(t-channel) (pb) SM 3Dstheo sNLO = 0.88pb ± 8% sNLO = 1.98pb ± 11% s(s-channel) (pb) hep-hp/207055 (Harris, Laenen, Phaf, Sullivan, Weinzierl) • Electroweak Production of top quark: • Measure production cross sections • Direct measurement of |Vtb| (s |Vtb|2) • Top spin physics (~100% polarized top quark) • s- and t-channels sensitive to different New Physics • Irreducible background to associated Higgs production • Exotic Models (FCNC, Top Flavor, 4th Gen)
Single Top Status t-channel s-channel • Cross sections:s-channel t-channel s+t • NLO calculation: 0.88pb (±8%) 1.98pb (±11%) • Run I 95% CL limits, DØ: < 17pb < 22pbCDF: < 18pb < 13pb < 14pb • Run II CDF 95% CL limits: < 14pb < 10pb < 18pb • Other Standard Model production mode (Wt) negligible d q t u W W q' b b t
Signature & Backgrounds Signal for s and t channel mostly similar • Lepton + Missing ET + Jets • t-channel extra b tends to be forward • Similar to top pair production, but with less jets Harder Signal To Find (t-channel) Backgrounds • W/Z + jets Production • Fake Leptons • Top Pair Production • WW, WZ, Ztt, etc. Much worse than for pair production because of lower jet multiplicity Anything with a lepton + jets + ET signature
Discriminating Variables • Object kinematics • Jet pT for different jets • Tagged, untagged,... • Event kinematics • H (total energy) • HT (transverse energy) • M (invariant mass) • MT (transverse mass) • Summing over various objects in the event • Angular variables • Jet-jet separation • Jet pseudorapidity (t-channel) • Top quark spin
Separating Signal from Backgrounds • Four analysis methods • Three (Cut, NN, DT) use the same structure: • Optimize separately for s-channel and t-channel • Optimize separately for electron and muon channel (same variables) • Focus on dominant backgrounds: W+jets, tt • W+jets – train on tb-Wbb and tqb-Wbb • tt – train on tb – tt l + jets and tqb – tt l + jets • Based on same set of discriminating variables • 8 separate sets of cuts/networks/trees Likelihood Discriminant Decision Trees Cut-Based Neural Networks
1. Cut-Based Analysis • Cuts on sensitive variables to isolate single top • Separate optimizations for s-channel and t-channel • Loose cuts on energy-related variables:pT (jet1tagged) H(alljets – jet1tagged)H(alljets – jet1best)HT (alljets)M(toptagged)M(alljets)M(alljets – jet1tagged)ŝ Factor 2 improvement!
2. Neural Network Analysis Input Nodes: One for each variable xi full dataset electron muon =1 b-tag 2 b-tags =1 b-tag 2 b-tags Output Node: linear combination of hidden nodes constructnetworks Hidden Nodes: Sigmoid dependent on the input variables 2d histograms, Wbb vs tt filter
Result • No evidence for single top signal • Set 95% CL upper cross section limit • Using Bayesian approach • Combine all analysis channels (e, m, =1 tag, 2 tags) • Take systematics andcorrelations into account Systematic uncertainty: Expected limit: set Nobs to background yield Expected/Observed limit: ss < 9.8 / 10.6 pb st < 12.4 / 11.3 pb
Neural Network Output e+m 1 tag e+m 1 tag e+m 1 tag e+m 1 tag
Result • No evidence for single top signal • Set 95% CL upper cross section limit • Using Bayesian approach and binned likelihood • Built from 2-d histogram of Wbb NN vs tt NN • Including bin-by-bin systematics and correlations Expected/Observed limit: ss < 4.5 / 6.4 pb st < 5.8 / 5.0 pb
3. Decision Tree Analysis HT>212 • Replace Neural Networks by Decision Trees • single tree, ~100 nodes • Remaining analysis steps identical • Same inputs • Same filter configuration • Binned likelihood analysis Fail Pass • Sensitivity comparable to Neural Network analysis Mt<352 pt<31.6 purity Expected/Observed limit: ss < 4.5 / 8.3 pb st < 6.4/ 8.1 pb
4. Likelihood Discriminant Analysis • New Analysis based on 370pb-1 dataset • Different btagging algorithm and selection • Likelihood Discriminant: • Input Variables:
Result • … Expected/Observed limit: ss < 3.3 / 5.0 pb st < 4.3/ 4.4 pb Best Limit !!!! Comparison of LH with NN analysis
Single Top Summary • Cross sections:s-channel t-channel s+t • NLO calculation: 0.88pb (±8%) 1.98pb (±11%) • Run I 95% CL limits, DØ: < 17pb < 22pbCDF: < 18pb < 13pb < 14pb • Run II CDF 95% CL limits: < 14pb < 10pb < 18pb • RunII DØ 95% Cl Limits: (230 pb-1) Cut Based < 10.6pb < 11.3pb Decision Tree < 8.3pb < 8.1pb Neural Network* < 6.4pb < 5.0pb (370 pb-1) (new analysis) Likelihood Discriminant< 5.0pb < 4.4pb * = Accepted for publication, hep-ex/0505063
Sensitivity to non-SM Single Top using only muon channel data using only electron channel data
Conclusion • Measurements of various top quark properties are underway and will improve with larger data sets • The single top cross section limits and sensitivity of the analyses are getting to a level where we can expect to observe single top quark production soon!. Stay Tuned.