1 / 21

Loading Asterisk

Loading Asterisk. Boot Sequence. Tap <F2> on your Keyboard to Enter Setup. Select Boot Sequence. Boot Sequence. Make sure that the CD-Rom is first in the boot Sequence. If not use the + - to move it to first. Loading Asterisk.

eugenia-norris
Download Presentation

Loading Asterisk

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Loading Asterisk

  2. Boot Sequence Tap <F2> on your Keyboard to Enter Setup. Select Boot Sequence

  3. Boot Sequence Make sure that the CD-Rom is first in the boot Sequence. If not use the + - to move it to first

  4. Loading Asterisk Select Option 2 and hit Enter Which will install Asterisk 1.8 ONLY

  5. Disk Partitions From the drop down Select Remove all partitions on Selected drives and create default layout

  6. Disk Partitions Click YES to remove All Partitions

  7. Time Zone Select Chicago from the Drop down which will put you in the central Time zone

  8. Password Enter a password that will be remembered

  9. Format The system is now formatting the disk

  10. Install Asterisk The system is now Installing

  11. Installation Complete Remove the CD from the drive and click reboot

  12. Configure IP Address After the reboot the system will take you to the following menu If you don’t select an item you will go right to the Linux Prompt If you miss this screen, logon using user=root and the password Type setup and you will get to this screen

  13. Configure IP Address Select Network Configuration Tab down and hit enter on Run Tool

  14. Configure IP Address Select eth0 and hit enter

  15. Configure IP Address Select Edit Devices and hit Enter

  16. Configure IP Address Tab down to Use DHCP and hit the space bar to take the asterisk out and configure a Static IP

  17. Configure IP Address Tab to - Enter Static IP Tab to - Enter Netmask Tab to - Enter Default Gateway IP and tab to OK and click enter

  18. Configure DNS Using the arrow key select Edit DNS Configuration and hit enter

  19. Configure DNS Enter the hostname Enter Primary DNS Usually the Paraclete App Server address is the DNS Server Click OK

  20. Configure DNS Click Save & Quit

  21. Reboot If not already logged on Enter User and Password and Log on. Type reboot at the command prompt

More Related