1 / 17

Robotic Microphone Stand

Robotic Microphone Stand. Team 19 Alex Lincoln Tyler Harrington Zach Newell. Introduction. Motivation – Provide more efficient and accurate method for recording sound at Pogo Studios. Objective. Create a wirelessly controlled robotic device capable of 10 movements

evan
Download Presentation

Robotic Microphone Stand

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Robotic Microphone Stand Team 19 Alex Lincoln Tyler Harrington Zach Newell

  2. Introduction • Motivation – Provide more efficient and accurate method for recording sound at Pogo Studios

  3. Objective • Create a wirelessly controlled robotic device capable of 10 movements • Program device to recall stored locations

  4. Design

  5. Power Supply • 11.1V 5Ah LiPo Battery • Wired into 5 motor drives (4 XY, 1 Z) • Delivers 3.2A when 4 motors running • Supplies 5V converter • Will deliver 3.2A for 1.5h or 1.6A for 3h • 5V buck converter • Servo (tilt) • Vcc for motor drives and encoders • 3.3V Regulator – Supplies WiFly Module

  6. Movements Design • Forward/Reverse • Right/Left • Up/Down • Tilt • Pan • Pittman 12VDC motor • 343 oz-in servo motor • Omnidirectional wheels Source: http://www.largescalerc.com/hs-805bbmegaservodualballbearing320ozin16sec22x12x24-1.aspx Source: http://www.vexrobotics.com/276-1902.html

  7. Movements Requirements • Vehicle shell • Weight limitations • Properly perform in all directions • Traverse in straight line • Spin on single axis for pan • Tilt 180 degrees Source: http://cosmoquest.org/forum/showthread.php/93909-Centrifuge-Forces-Equation

  8. Control

  9. Encoders

  10. iPad Application

  11. Microcontroller Logic Run Loop Opcode Present? YES Execute NO Update Location

  12. PCB Process • Proto-board Testing • PCB creation in Eagle • PCB #1 • PCB #2 • Extensive Testing

  13. Challenges • Multidirectional movement • Position recall • Fried motor drives • Safely powering down • Dead battery • Demo day

  14. Final Product

  15. Next Steps • Regulate battery voltage to 11 V • Build enclosure to eliminate shock hazards • Add sensors to prevent collision • Create a live video feed from device to Ipad app

  16. Questions Source: http://www.eklavvya.in/QuestionBank.aspx

More Related