80 likes | 81 Views
These were the steps to resolve the red light blinking error. If you want further assistance do not hesitate to contact (817) 442-6650 Epson Tech Support Number.
E N D
Technology and creation have brought us to an age where just a few hits of your fingers can get any job done within a limited time. From devices to phones and many other appliances, it has acquainted us with the liberation from physical actions and wastage of efforts. One such revolutionary piece of equipment is the printer. Just imagine if you had to jot down data for reproducing copies, but in modern ear, you just have to stack the bundle and get as many copies as you wish. In the sector, you will find varied choices, but one brand which needs no introduction in the field of printers is Epson. No matter what you need, Epson would have a variant right for you. Nonetheless, occasionally these devices can disturb a user with their mistakes. One such error which users favor while using an Epson printer is Epson L210 red light blinking error. NEXT
The easiest retort to rectify this error is by reaching out to Epson Customer service. You can directly contact them or try out the methods mentioned below to fix this error. The primary cause of this issue is the faulty filling of ink in the cartridges. The red light alludes to the wrong filling of ink. It could also mean that the ink levels are low or the printer doesn't recognize the cartridges. No matter what the cause is, just adopt the steps given below to fix this issue.
Issue 1: The paper bar is not in the accurate spot At times a printer will demonstrate a red light when the readjust paper bar is not in its favorite spot. Here you have to confirm that it is properly placed and you can also ascertain the change bar for the capacity of the paper. After maintaining the right position of the bar, tap the “push the paper” icon.
Issue 2: Paper jam issue Step 1: First you have to turn off the printer Step 2: Now ascertain the change bar to the arrangement Step 3: After organizing the change bar now discard all the papers Step 4: Get the readjust bar back to its exact position Step 5: Now stack the paper in the roll paper feeder. Step 6: Turn on the printer and survey if the light is still flashing or not
Issue 3: Depleted ink levels • Try to find out the empty cartridge. To figure that out, spot the cartridge for which the red light is blinking. Thereafter, purchase accurate and authentic cartridges to mitigate this issue. The codes for various colors are as follows: • Black: T0341 • Magenta: T0343 • Cyan: T0342 • Yellow: T0344 • Light magenta: T0346 • Light cyan: T0345 • Light black: T0347 • Matte black: T0348
ISSUE 4: FAULTY INSTALLATION OF INK CARTRIDGES • To overhaul the faulty installation of ink cartridges do as follows: • Tap the ink switch present on the printer • Align the print head • Reinsert the ink and take out the cartridges • Proceed with the setup procedure.
These were the steps to resolve the red light blinking error. If you want further assistance do not hesitate to contact (817) 442-6650 Epson Tech Support Number. Related Articles:- Fix Epson Printer Printing with Lines Missing or Printer Skipping Lines Issues Epson printer driver is unavailable Epson Printer Utility Setup Error 1131 Epson printer error e-01