1 / 5

How to set-up the speaker for the presentation area

How to set-up the speaker for the presentation area. Wiley Speaker System Tech Support: 1-800-My3DTec. Head Mic for body Back HBM-TA4F. AN-1000U1X+ Speaker. Lav Mic for Body Pack LM-60. Hand Held Mic WB-6000. Body Back for above WB-6000. Speaker Setup.

evers
Download Presentation

How to set-up the speaker for the presentation area

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to set-up the speaker for the presentation area

  2. Wiley Speaker System Tech Support: 1-800-My3DTec Head Mic for body Back HBM-TA4F AN-1000U1X+ Speaker Lav Mic for Body Pack LM-60 Hand Held Mic WB-6000 Body Back for above WB-6000

  3. Speaker Setup DIVERSITY WIRELESS BY ANCHOR AUDIO Anchor Audio UHF wireless is a 16 channel, diversity wireless system that receives signals with two independent antennae. With diversity wireless the receiver processes the stronger signal, effectively minimizing dropouts and interference from other transmitting sources. The antennae are mounted internally so there are no obstructions or risk of damage. CONTROLLING FEEDBACK Feedback, a howling noise or shrill sound, is self-generated by the sound system. It’s caused by a microphone picking up the sound coming from the speaker and then re-amplifying it. Once a feedback loop starts, it continues until the system is adjusted. NOTE: Ongoing wireless interference? The frequency you selected may be in use by other systems in the area. Change channels until you find a clear frequency. AVOIDING & ELIMINATING FEEDBACK • Point microphone in a different direction • Keep microphone away from the speaker • Place speaker in FRONT of the microphone • Reduce the sound system volume levels CAUTION: Feedback can damage your equipment & may be hazardous to hearing. • FEEDBACK CAUSES • Microphone too close, pointing towards or in front of speaker • Volume setting is too loud for room • Sound reflecting off hard surfaces NOT USED UNLESS YOU ARE CONNECTING A IPOD OR LAPTOP

  4. Wireless setup

  5. Troubleshooting There are two volume controls: one on the front of the speaker – and one on the rear. Make sure they are both turned up

More Related