1 / 26

Error Handling: From Theory to Practice

Error Handling: From Theory to Practice. Ivan Lanese Computer Science Department Univers ity of Bologna/INRIA Italy. Joint work with Fabrizio Montesi italianaSoftware s.r.l./ IT University of Copenhagen. Roadmap. The quest for error handling primitives Theoretical concerns

ewa
Download Presentation

Error Handling: From Theory to Practice

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Error Handling: From Theory to Practice Ivan Lanese Computer Science Department University of Bologna/INRIA Italy Joint work with Fabrizio Montesi italianaSoftware s.r.l./IT University of Copenhagen

  2. Roadmap • The quest for error handling primitives • Theoretical concerns • Practical concerns • Conclusive remarks

  3. Roadmap • The quest for error handling primitives • Theoretical concerns • Practical concerns • Conclusive remarks

  4. Our aim • Error handling is a fundamental aspect of calculi and languages for service-oriented computing systems • Many approaches, no one accepted as the “best” one • Which properties make an approach good? • Are those properties the same in theoretical calculi and full-fledged languages?

  5. Service Oriented Computing (SOC) • SOC is a paradigm to program distributed applications • Based on the composition of dynamically discovered, loosely-coupled services • Services interact using the one-way and request-response patterns • Has to deal with interoperability, dynamicity, reconfiguration… • Based on standards for data (XML), communication (SOAP), discovery (WSDL and UDDI) and orchestration (BPEL) • Allows integration of services from different companies

  6. Error handling • Safe composition of services requires todeal with faults • Scarce guarentees on service behaviour because of loose coupling • Unexpected events can happen • Faults should be managed so that the whole system can reach a consistent state • Tackled using long-running transactions and compensations

  7. Error handling in everydays life • A process Parameters: Fault handler:

  8. Some terminology (in the BPEL/Jolie style) • Long-running transaction: transaction that performs approximate rollback in case of error • Handler: piece of code executed for error recovery • Q in the Java code try P catch e Q • Scope: a boundary for handler execution • Scopes may be nested • Fault handler: handler executed in case of internal fault • Termination handler: handler that smoothly terminates an activity in case of an external fault • Compensation: handler for undoing the effects of an activity in case of later fault

  9. Process calculi • The complexity of error handling requires formal models • To really understand the behavior of systems • To prove properties • Process calculi are a widely used model of concurrency • In particular for SOC and error handling • Good basis for developing a real language • Allows to experiment and assess different primitives • λ-calculus is the basis of functional languages • Many languages based on π-calculus • E.g., Pict

  10. The zoo of calculi for error handling • CSP interrupt operator (Hoare, 1985) • Πt-calculus (Bocchi, Laneve, Zavattaro, 2003) • StAC (Butler, Ferreira, 2004) • cJoin (Bruni, Melgratti, Montanari, 2004) • cCSP (Butler, Hoare, Ferreira, 2004) • SAGAs calculi (Bruni, Melgratti, Montanari, 2005) • Webπ (Laneve, Zavattaro, 2005) • COWS (Lapadula, Pugliese, Tiezzi, 2007) • SOCK (Guidi, Lanese, Montesi, Zavattaro, 2008) • Dcπ (Vaz, Ferreira, Ravara, 2008) • ATc (Bocchi, Tuosto, 2010)

  11. Roadmap • The quest for error handling primitives • Theoretical concerns • Practical concerns • Conclusive remarks

  12. Desirable properties for calculi • There are too many calculi • Which are the aims those calculi want to achieve? • Which are the interesting dimensions for comparing them? • We consider 4 interesting properties • Full specification • Expressiveness • Intuitiveness • Minimality • Apply to calculi in general, but we concentrate on error handling

  13. Full specification • The calculus has to specify the behavior of error handling in all possible cases • Including boundary/rare cases • E.g., what happens if a fault handler throws a fault? • E.g., what happens if a fault happens in parallel to a running request-response service invocation? • Usually, all theoretical models enjoy this property • Easy to check for instance for semantics defined by structural induction • This is not the case for informal specifications • BPEL specification is unclear on many points • Different BPEL implementations have different behaviors

  14. Expressiveness • The available primitives should be able to express all the policies that may be needed for programming applications • Difficult to define which are “all the policies” • Normally tackled using encodings and case studies • An encoding of a calculus C1 into C2 proves that C2 is at least as expressive as C1 • Which properties should the encoding preserve? • Gaps in expressiveness can be proved via non-encodability results • A case study shows the suitability of a calculus for a particular application

  15. Intuitiveness • The behavior of the primitives should match the intuition of the programmer • (after some training) • Having the calculus following some clear and orthogonal principles strongly helps • E.g., a scope may either fail by throwing a unique fault, or succeed by installing its compensation for later use • Those principles should be defined before formalizing the calculus • Those principles are the base of the manual for the programmer • For complex cases it may be necessary to go back to the specification • It is possible to prove that the calculus semantics really follows those principles

  16. Minimality • The calculus should avoid redundant or overlapping primitives • More easy to understand • More easy to prove properties • Having the calculus following some clear and orthogonal principles strongly helps (again!) • One may prove that the calculus is more expressive than its fragments • Difficult result

  17. Roadmap • The quest for error handling primitives • Theoretical concerns • Practical concerns • Conclusive remarks

  18. From a calculus to a language • Calculi can (should?) be used as a basis for implementing languages • Many examples starting from λ-calculus and π-calculus • Not many examples for error handling in SOC • Which is the difference between a calculus and a full-fledged language? • No easy answer • Languages are used for programming real applications • Personal (not so serious) answer: languages allows comments • Languages should have “something more”

  19. Desirable properties for languages • The differences between calculi and languages influence the properties seen before • Minimality less strict, intuitiveness even more important • We devise 3 new properties • Usability • Robustness • Compatibility • Again, we concentrate on error handling • Based on the Jolie experience • A language for programming SOC applications based on the calculus SOCK • With strong support for error handling

  20. Usability • The programmer should be able to use the language for its day-by-day programming • Includes expressiveness and intuitiveness • Powerful data handling is needed • Normally not detailed in calculi • The most common patterns should be easy and fast to program

  21. Usability in Jolie • SOCK throw primitive has the syntax throw(f) • This becomes throw(f,M) in Jolie • M is some data to be used during error recovery • E.g., information on the fault or an error message • Can be accessed by the handlers • More interesting (but complex!) examples in the paper

  22. Robustness • The language should be able to deal with failures in the environment • Network problems, node crashes • Those aspects normally not modelled in calculi • Unless they are dedicated calculi • Programming languages need to manage these • E.g., if a communication chennel breaks a system fault has to be thrown • Jolie runtime support raises a system fault IOexception • This can be managed using the standard SOCK/Jolie handler constructs

  23. Compatibility • Real programs have to interact with different, heterogeneous applications • These applications may follow different protocols, in particular for error handling • SOCK/Jolie services ensure notification in case of remote errors • Useful for distributed error handling • Non Jolie services provide no such a guarentee • Jolie engine checks when a connection is closed unexpectedly and provides a notification via IOexception

  24. Roadmap • The quest for error handling primitives • Theoretical concerns • Practical concerns • Conclusive remarks

  25. Conclusions • Defining a good calculus for error handling in SOC is not easy • Important to follow clear principles • … but there are a lot of good proposals • Defining a good language based on them is even more difficult • … and there are not many proposals around • We have described some of the main issues and pointed out possible approaches • We hope to see new languages for SOC with formal underpinning in the future

  26. End of talk Thanks! Any question?

More Related