160 likes | 204 Views
Enjoy your success in CWNP Certification Exams with our Certified Wireless Network Administrator Exam Dumps!!! CWNA-106 Dumps Questions Answers with Certified Wireless Network Administrator Practice Test software is a success leading way towards your CWNP CWNA-106 Exam. All the CWNA-106 Questions Answers are tested and approved by professional experts to assure 100% success in CWNP CWNA exam. Get huge discount 20% off on all products by using this coupon code “use20”. Visit us for more information<br>https://www.examcollection.us/CWNA-106-vce.html
E N D
CWNP CWNA-106 Certified Wireless Network Administrator
Enjoy your success in CWNP Certification Exams with our Certified Wireless Network Administrator Exam Dumps!!! CWNA-106 Dumps Questions Answers with Certified Wireless Network Administrator Practice Test software is a success leading way towards your CWNP CWNA-106 Exam. All the CWNA-106 Questions Answers are tested and approved by professional experts to assure 100% success in CWNP CWNA exam. https://www.examcollection.us/CWNA-106-vce.html
Don’t take any stress for the preparation of CWNA-106 Exam because we will provide you real Exam questions answers, Examcollection provide you some demo question answer of CWNA-106 VCE. https://www.examcollection.us/CWNA-106-vce.html
QUESTION 1, What statements accurately describe the RF cables and connectors that are used in an 802.11 WLAN system? (Choose 3) A. RF cables have upper and lower frequency range specifications. B. 75 and 125 ohms are the typical impedances of 802.11 WLAN connectors. C. Two RF connectors of the same type (e.g. SMA), manufactured by different companies, may vary in specifications. D. Every RF connector causes insertion loss. E. Large diameter RF cables cause greater loss than smalldiameter cables. Answer: A, C, D https://www.examcollection.us/CWNA-106-vce.html
QUESTION 2, Which one of the following frequency ranges is not specified for use by IEEE 802.11 radios as of 802.11-2012? A. 600-630 MHz B. 2.4000-2.4835 MHz C. 5.725-5.874 GHz D. 5.15-5.25 GHz Answer: A https://www.examcollection.us/CWNA-106-vce.html
QUESTION 3, What distinguishes an independent basic service set (IBSS) from an infrastructure basic serviceset (BSS)? A. An IBSS does not have a distribution system (DS), but a BSS does. B. An IBSS does not require beacon frames, but a BSS does. C. An IBSS does not support 802.11authentication or association, but a BSS does. D. An IBSS does not support any 802.11ac enhancements, but a BSS does. Answer: A https://www.examcollection.us/CWNA-106-vce.html
QUESTION 4, What advantages does using predictive site survey modeling software offer over performinga manual site survey? (Choose 2) A. Predictive modeling software can predict the ideal access point location 100% of the time, whereas the results from manual surveying are less reliable. B. Predictive modeling software makes it simple to assess multiple different AP locations and then adjust and display the AP’s expected coverage pattern in almost real-time. C. Predictive modeling software provides more reliable data than manual surveys when fine-tuning and validating access point placement after the installation. D. The exact impact of interference sources from external networks can be more accurately measured when using predictive modeling software than with manual surveys. E. It takes less time to create an initial site survey for a large facility when using predictive modeling software than when performing a manual survey. Answer: B, E https://www.examcollection.us/CWNA-106-vce.html
QUESTION 5, The 802.11 protocol specifies a fundamental channel access method that is required for all stations and is available for use in all IBSS and BSS networks. What is this fundamental channel access method called? A. DCF B. PCF C. HCF D. EDCAF Answer: A https://www.examcollection.us/CWNA-106-vce.html
QUESTION 6, When compared with legacyPower Save mode, how does VHT TXOP power save improve battery life for devices on a WLAN? A. VHT TXOP power save allows stations to enter sleep mode and legacy Power Save does not. B. VHT TXOP power save uses the partial AID in the preamble to allow clients to identify frames targeted for them. C. Legacy Power Save mode was removed in the 802.11ac amendment. D. VHT TXOP power save allows the WLAN transceiver to disable more components when in a low power state. Answer: B https://www.examcollection.us/CWNA-106-vce.html
QUESTION 7, What feature was introduced in the 802.11h amendment in order to uphold regulatory requirements for 5 GHz operations. A. 256-QAM B. Distributed Coordination Function (DCF) C. Transmit Power Control(TPC) D. Radio Resource Management (RRM) Answer: C https://www.examcollection.us/CWNA-106-vce.html
QUESTION 8, What is alwaysrequired to establish a high quality 2.4 GHz RF link at a distance of 3 miles (5 kilometers)? A. Minimum output power level of 2 W B. Grid antennas ateach endpoint C. A minimum antenna gain of 11 dBi at both endpoints D. A Fresnel Zone that is at least 60% clear of obstructions Answer: D https://www.examcollection.us/CWNA-106-vce.html
QUESTION 9, What term describes the effect of increasing the intensity of an RF wave withan antenna by focusing the energy in a specific direction? A. Distributed Radiation B. Active Amplification C. Beam Compression D. Passive Gain E. RF Flooding Answer: D https://www.examcollection.us/CWNA-106-vce.html
QUESTION 10, The IEEE 802.11-2012 standard requires VHT capable devices to be backward compatible with devices using which other 802.11 physical layer specification (PHY)? A. OFDM B. HR/DSSS C. ERP-PBCC D. DSSS Answer: A https://www.examcollection.us/CWNA-106-vce.html
Why Choose US https://www.examcollection.us/CWNA-106-vce.html
Good luck Examcollection provides you guaranteed success in CWNA-106 exam as we have latest CWNA-106 exam dumps. Click Here following link to download CWNA-106 VCE. https://www.examcollection.us/CWNA-106-vce.html