Tank and Beam Epoxy Industrial Coatings 101

1. Tank and Beam Epoxy Industrial Coatings 101 Epoxy coating is one of the many kinds of coatings you can use on your tanks and beams. If you’re wondering why you should consider this, then here are a few reasons: First of all, tank and beam epoxy industrial coatings are used to protect the substance inside the tank. The problem with having no coating at all is that some particles can seep through or pass through the tank or beam and this can cause a chemical reaction in whatever substance is inside. Having epoxy coatings will help prevent these chemical reactions and will ensure that nothing passes through them. Moreover, liquid substances are known to be highly reactive to particles as compared to dry substances. The kind of coating varies depending on the substance inside the tank, but in general, epoxy coatings are known to be resilient and easy to apply. Secondly, having coatings will help lengthen the lifespan of the actual tank or beam. Most beams and storage facilities are made of steel and although it is a good material for holding substances of large volumes, it is prone to reactions and corrosion. Having protective coating will help avoid many maintenance costs for steel

2. tanks and beams because it is able to prevent corrosion. However, when no coating is applied, the steel itself weakens over time and leaks may occur. And regardless of substance, leaks will always be dangerous not just for everyone’s safety, but also to the environment’s. More Reasons For Tank and Beam Epoxy Industrial Coatings Another reason to have your tanks coated is that it keeps the substances inside pure. Since coatings prevent anything from penetrating the tank, then it also goes without

3. saying that the substances inside will barely have any other substances mixed with them. In the course of this article, you have read corrosion a lot of times. But do you know what it means? Simply put, corrosion is a naturally-occurring process wherein the material weakens over time due to chemical reactions with its environment and the many substances it comes into contact with. When not prevented, corrosion can lead to the uselessness of the actual material or much worse, chemical reactions with whatever is inside the tanks. A more in-depth explanation of corrosion has something to do with the transfer of energy between steel when it is molded and manufactured to form a tank or a beam. The finished steel product would have an imbalance of electrons and as nature strives to put it back into balance (with the right number of electrons), any substance that comes into contact with steel tends to create a create a transfer of ions. Based on these scientific explanations, you would understand why linings and coatings are important. In reality, deciding what kind of substance should be placed as lining and coating should be one of the main decision points of the management. It may seem costly at first, but in the long run, you will be thankful for investing in preventive measures so that the chances of having accidents and dangerous substance reactions are lessened. Tank and beam epoxy industrial coatings are the solution to your rusty or corroded tank and beam issues! Extreme Industrial Coatings Address:703 North Abby Fresno, CA 93701 Phone: 559-213-4731 Justin@ExtremeIndustrialCoatings.net https://www.extremeepoxycoatings.com/tank-beam-epoxy-industrial-coatings-101/