1 / 8

ADEPT 2.0 First-Time User Guide

ADEPT 2.0 First-Time User Guide. Xufeng Wang Electrical and Computer Engineering Purdue University West Lafayette, IN 47906. ADEPT 2.0. Available on nanoHUB.org exclusively for NPT members! http://nanohub.org/resources/10913. Inputdeck. Create a new input.

farrah
Download Presentation

ADEPT 2.0 First-Time User Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ADEPT 2.0 First-Time User Guide Xufeng Wang Electrical and Computer Engineering Purdue University West Lafayette, IN 47906

  2. ADEPT 2.0 Available on nanoHUB.org exclusively for NPT members! http://nanohub.org/resources/10913

  3. Inputdeck Create a new input • Upon opening ADEPT 2.0, a blank input page will appear, awaiting your input file. • If upload/download does not work, one reason could be “pop-up” blocking by your internet browser. Upload an input deck from your local computer Download this input deck to your local computer List of pre-loaded example input decks. Try them for some quick simulation samples!

  4. Running a simulation This is your entire input file. You can edit it here. • Keep in mind that ADEPT 2.0 is FORTRAN 77 based. The format of certain input may cause unexpected error. • Please refer to “ADEPT 2.0 User Manual” for more information regarding how to write an ADEPT input deck. Finally, click here to begin simulation

  5. While simulation is running • In ADEPT, an entire simulation consists of two parts: ADEPT simulation and PLOTA output generation. This window dynamically displays output. Sometime, an error occurs and a notification will be shown here. This is a simulation progress bar. It shows approximately how much simulation is done.

  6. Outputs Click “input” to go back to input page. Worry not! Your old simulation results will be saved until you close ADEPT 2.0. Click here for a complete list of output plots You can review your old simulations results here Click “clear” to clear out all output plots

  7. Output Download the plot as CSV or PDF image Click on the plot and drag to “Zoom” “Zoom” reset Click “play” to look at this output quantity at different bias

  8. Output Click on axis to format it Curve formatting Bias sequence display option

More Related