1 / 2

Common Quality Problems that can occur in Fasteners

Folds are a common appearance on the surface of metals and allies that are used widely by Nut and Bolt Suppliers, and machine screws manufacturers. They are similar to cracks in properties but they usually look like two parallel lines on the surface of the material. These lines can cause damage to the installed fasteners and the machines.

fastenerworldofficial
Download Presentation

Common Quality Problems that can occur in Fasteners

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Common Quality Problems that can occur in Fasteners Fasteners are made using different materials by Fasteners Supplier manufacturers. The choice of material depends on the various applications and uses of these fasteners. For instance, stainless steel is a non-corrosive and high- temperature resistant material. These properties make it an ideal choice for fasteners that need to be used in environments that can cause corrosion or oxidation and in high temperatures. Similarly, brass is a hard material and thus brass fasteners are produced by fastener suppliers and Hex Nut Manufacturer India to meet the requirements for fasteners that can be installed and used in applications that require higher strength and force. The production process of fasteners is full of a lot of technical processes and functions. The production and manufacturing of fasteners that are up-to-the-mark is not an easy job and requires a lot of skill and precision. But even though a skilled professional is producing the fasteners, it does not mean that the production process will not be faced with challenges. The production cycle of fasteners includes some common yet manageable problems related to the quality of the fastener materials. These problems are faced by

  2. fastener manufacturers during or before the production cycles of the fasteners and are generally related to the damage to the fastener materials used in the production of fasteners. Let us look at a bunch of these quality problems faced by fastener manufacturers. Cracks: Most fastener materials used by fastener manufacturers are either alloys or metal. These materials are prone to undergoing cracks. Cracks are small voids and depressions caused on a surface due to pressure or force and other agents. If the material has cracks and is used in the manufacturing of fasteners, the fastener will be prone to failure after or during the installation process. It is advisable to check the surface of fastener materials for any cracks and depressions before using them for manufacturing fasteners. Folds Folds are a common appearance on the surface of metals and allies that are used widely by Nut and Bolt Suppliers, and machine screws manufacturers. They are similar to cracks in properties but they usually look like two parallel lines on the surface of the material. These lines can cause damage to the installed fasteners and the machines. Fastener materials also face other problems like scratches, seams, overlaps and inclusions. However, these problems can be eliminated by the expertise of a GI Nut Bolt Manufacturer and Flange Bolt Manufacturer . Fastener World is a leading fastener supplier in India, You can get the best quality of fasteners at Fastener World.

More Related