1 / 13

Percent Composition

Percent Composition. The chemical composition can be expressed as the mass percent of each element in the compound. Carry out % mass to the tenths place. Example: Determine the percent composition of C 3 H 8. Assume you have one mole of the substance. 3 C = 3(12.0) = 36.0 g

fausto
Download Presentation

Percent Composition

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Percent Composition

  2. The chemical composition can be expressed as the mass percent of each element in the compound. Carry out % mass to the tenths place.

  3. Example: Determine the percent composition of C3H8. • Assume you have one mole of the substance. 3 C = 3(12.0) = 36.0 g 8 H = 8(1.0) = 8.0 g Total MW = 44.0 g

  4. Example: Determine the percent composition of iron(III) sulfate. • Iron(III) sulfate = Fe2(SO4)3 2 Fe = 2(55.8) = 111.6 g 3 S = 3(32.1) = 96.3 g 12 O = 12(16.0) = 192.0 g Total MW = 399.9 g

  5. Hydrated Compounds Some compounds exist in a “hydrated” state. Some specific number of water molecules are present for each molecule of the compound.

  6. Example: oxalic acid (COOH)2 can be obtained in the laboratory as (COOH)2•2H2O. Note: the dot in (COOH)2•2H2O shows that the crystals of oxalic acid contain 2 water molecules per (COOH)2 molecule.

  7. Example: oxalic acid (COOH)2 can be obtained in the laboratory as (COOH)2•2H2O. • The molar mass of (COOH)2 = 90.0 g/mol • The molar mass of (COOH)2•2H2O = 126.0 g/mol • Water can be driven out of a hydrated compound by heating it to leave an “anhydrous” (without water) compound.

  8. Example: A 7.0 g sample of calcium nitrate, Ca(NO3) 2•4H2O, is heated to constant mass. How much anhydrous salt remains? • % mass anhydrous salt = • Mass of anhydrous salt remaining =

  9. Hydration Number Some molecules attach themselves to water molecules. This is done in set numbers, depending on the molecule. For example, Magnesium sulfate attaches to 7 water molecules. We say it’s hydration number is 7 MgSO47H2O (Magnesium Sulfate Heptahydrate)

  10. Anhydrides A compound that is normally a hydrate and has lost its hydration water is said to be anhydrous and is called an anhydride. BaCl22H2O Barium Chloride Dihydrate BaCl2 Barium Chloride Anhydride -or- Anhydrous Barium Chloride

  11. Finding the Hydration Number The hydration number can be conveniently found by heating the compound and measuring its mass loss. This mass loss is usually due to the hydration water molecules being driven off. For example… A 15.35 g sample of Strontium nitrate, Sr(NO3)2nH2O, is heated to a constant mass of 11.45 g. Calculate the hydration number.

  12. Sample Data: Mass Hydrate 15.35g Mass Anhydride 11.45g Mass of Water (mass loss) 3.90g

  13. Calculations Moles Anhydride Moles Water Molar ratio… Hydration Number is 4, Sr(NO3)24H2O (Strontium Nitrate Tetrahydrate)

More Related