1 / 19

Plasma Performance Analysis in Helical Reactors

This workshop focuses on the analysis of plasma performance in helical reactors, exploring reactor parameters and R&D issues in this system. The objective is to compare helical reactors with tokamak reactors and study the limitations and constraints of helical systems. The workshop also discusses the design considerations for ignition devices and power plants.

fcrawford
Download Presentation

Plasma Performance Analysis in Helical Reactors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. US-Japan Workshop onFusion Power Plants and Related Advanced Technologies with participation of EUOctober 9-10, 2003 at UCSD System Code Analysis of Plasma Performance in Helical Reactors High Temperature Plasma Center, the University of Tokyo Yuichi OGAWA, Takuya GOTO Acknowledge to Profs. A. Sagara, S. Imagawa and K. Yamazaki in NIFS

  2. Objective and Scope • Preliminary study on reactor parameters and comparison with tokamak reactors • To explore the R&D issues in helical system. • Scope of this study is following two devices; (a) Ignition Device (b) Power Plant

  3. Physics Constraints • Plasma Equilibrium  no equilibrium calculation at present  limitation of plasma aspect ratio is taken into account. (i.e., A > 3 ) • Plasma Confinement  several confinement scalings in helical plasmas are employed. (neoclassical transport, a-particle confinement is not taken into account.) • Density Limit  Density limit scaling is taken into account. • Beta Value  no stability calculation at present ( In LHD higher beta value theoretically predicted has been achieved.)

  4. Plasma Confinement Scaling • ISS95 • LHD • Lackner-Gottardi (ref. Tokamak Scaling) Strong density dependence in helical plasmas

  5. Density Limit Scaling Helical tokamak and Current Drive Efficiency ( i.e., Pcd ~ n ) A low temperature operation is desirable for divertor heat load. In tokamak plasmas a high density operation is limited, resulting in high temperature operation (i.e., T = 15~20keV).

  6. Radial build (LHD-type reactor is adopted.) (Blanket) (Clearance)

  7. Ignition Machine • Small size with a moderate fusion power • Present technology

  8. ＩＴＥＲ－ＦＤＲ ＩＴＥＲ－ＦＥＡＴ Ignition device(H=2, Bmax=13T,T=12keV) Fusion Power Pf(MW) A=5 A=3 A=7 Major Radius :R(m) A low aspect ratio is required for a small device.

  9. Ignition device(H=2, Bmax=13T,T=12keV) Fusion Power Pf(MW) n/nc=0.75 n/nc=0.8 Major Radius :R(m) Still we have a margin to the density limit. The temperature and the magnetic field might be reduced.

  10. Ignition device(H=2, Bmax=10T,T=10keV) Fusion Power Pf(MW) n/nc=0.9 n/nc=1.0 Major Radius :R(m) If the density is increased to the density limit, the Bmax and the operation temperature are reduced.

  11. Ignition device (Lackner-Gottardi scaling ) (H=2, Bmax=13T,T=12keV) Fusion Power Pf(MW) Major Radius :R(m)

  12. Ignition device (LHD scaling ) (H=2.5, Bmax=13T,T=12keV) Fusion Power Pf(MW) Major Radius :R(m)

  13. Power Plant • 3GW thermal power • Engineering Progress might be expected.

  14. Power Plant (H vs Bmax) H-factor ●R=8m ●R=10m Bmax(T) If the magnetic field is strengthened, the H factor is relaxed.

  15. Power Plant ( density vs Bmax) density n(10E20m-3) Bmax(T) A low temperature operation is available in helical system, if the magnetic field is increased.

  16. Power plant (Density limit vs Bmax) n/nc T=8keV T=15keV Bmax(T) A critical density limits the operation temperature.

  17. Beta value (%) Bmax=10T Bmax=25T Major radius R(m) Power Plant (Beta value) If the maximum magnetic field strength Bmax is increased, a smaller device is available and a margin to the beta value is relaxed.

  18. Power Plant (neutron flux) Neutron flux Pn(MW/m2) Bmax=25T Bmax=10T Major radius R(m) A neutron flux will limit a size of the device.

  19. Summary For Ignition Device ●　H=2~2.5　might be necessary. ●　For Pf = 1GW device R ~ 8 m in A = 3 R ~ 12 m in A = 5 For Power Plant ●　High Density Operation might be feasible. 　　●　High Field is beneficial. On Plasma Physics & Technology 　●　Low aspect ratio (A = 3~5) 　●　Confinement improvement by a factor of 2 ~ 2.5 　●　Exploration for high density operation 　●　Development of a high field magnetic coil

More Related