Guide to Take Care of Headsets

1. How to Take Care of Headsets in the Right Way! Headphones and other listening apparatus have become a crucial subject in every industry. Whether you want to use headphones on your phone, laptop, music player, or speakers, one thing that you always need to take into consideration is taking care of them. Failure to take good care of them can deteriorate the performance and quality of sound over-time, which further leads to complete damage. Therefore, it is necessary to keep them into top condition for good audio fidelity. Maybe you just bought a pair of wireless headsets you love and want to keep them looking as good as possible? Or maybe you have excellent headphones, but are not able to take the proper steps to clean them? Whatever the case, you are in the right place. Here are top following tips that will help you to keep the life of your headphones long-lasting. So, let’s have a look. Tips for Taking Care of headset in a Right Way ●Always Keep Headphones Clean Usually, headphones and earbuds are bound to get dirty. But cleaning them with water or other cleaning products does not seem the right option. So, in order to clean them properly, a soft cloth, warm water, and a little soap are usually considered the best way of keeping your headphones absolute dirt-free. In addition, you can also use a toothpick to remove all the wax, dead skin cells and dust from the inner areas of your headsets and earbuds. If your wire is accumulated with dust particles, then it is recommended to gently clean it. It is also worth reading the instructions mentioned in your kit. Keep a dry toothbrush to dislodge bits of dirt and grime that is settled inside meshed areas of

2. the headphones. Dab down your kit with the towel afterwards and give it plenty of time to dry naturally. ●Unplug Them After Use Leaving your headphones attached to your device can lead to an unforeseen situation like damage. In any case, if the cord pulled suddenly from the jack or cord gets tangled, then the copper cord placed inside could break. Therefore, it is a good habit if you unplug the headphones after using. Unplugging your headsets will protect the audio connector and the sensitive area where the cord joins the jack. While removing the headphones from an audio source, hold it tightly and then pull the connector. Do not try to put extra stress on the connector while inserting or pulling the cable. It will damage it eventually. ●Turn Down The Audio Before Plugging the Headphones In When connecting or disconnecting the headphones, ensure that the device is not running any audio. It is necessary to turn down the volume first. Ignoring this can cause a "pop" in the headphones which may result in an early breakdown. Once your headphone is plugged in, raise the volume until it is not connected at the comfortable listening level. Most people plug out the cable instead of pulling out the plug that is directly attached to the source. So, you should grip and pull the connector while removing the headphones from the audio source. ●Store the Headphones Properly For protecting your headphones from getting damaged, you should store your headphones in a clean, dry place and make use of protective cases. In addition, avoid the temperature extremes. Follow the official instructions to fold them up nicely and reduce the wear and tear when you are not using them. As you know, the tangled cable can cut down your listening time. In order to avoid this, use a case that keeps the cable organized and wrap them carefully in a figure-eight shape around two fingers. Taking better care of your headphones may be time-consuming but the long- term effects are going to be noticeable.

3. ●Do Not Turn Up the Volume Too High While listening to music, extreme volume levels will not only damage the headphones but harm the ears also. Turning the music up too high can also cause the speakers to blow. Therefore, basic precautions are necessary as they can leave an impact on the life span of your listening equipment. It is worth considering the size of your ear tips in order to make sure you are using ones that fit into your ears comfortably. So, treat your headphones with as much care as you do your other electronic devices. ●Be Careful With your Cable The other most important rule of headphone maintenance is properly winding the cable. Looping the cable around your fingers will avoid internal damage and help to store them in the right way. When your cable is crumpled, then it will more likely create kinks and breakage points over time, even if the outside of the cord appears safe. Cases are featured with an amazing facility that holds the coiled cable. Winding up the cable and then securing it with a twist tie will go a long way, plus prolong its life. Storing your cable in a case will also prevent its connection points from any tension. ●Avoid Sleeping With your Headphones On While sleeping, rolling over your headphones can bend or snap them. Therefore, it is essential to wind up the earbuds or headsets in neat coils and place it in a safe place before going to bed. Do not avoid this step as it protects your headphones from getting breakdown or damage. ●Consider DACs and Preamps DACs are stated as digital-to-analog converters that are improving the overall audio quality, as opposed to the frequency response of the headphones. It converts the digital signal from the phones to an analog signal your headphones can output. By plugging your headphones into the preamp/DAC, it will offer lower distortion and

4. play high-resolution files with high bitrate and sample rates without lowering their quality. Such devices are capable of increasing the fidelity of your audio. ●Check Your Audio Source In order to get the best audio performance from your headphones, you need to come to terms of most streaming audio services. Some services are offering high-quality streams, which are also reliant on internet signal strength. So, it is a good idea to download a high-quality version of the song or album you want. Make sure both stream quality and download quality are set to the high or extreme setting, so you can listen to music with higher sound quality. ●Avoid Carrying the Earbuds in your Pocket Avoid carrying the earbuds in your pocket. By doing so, it can lead to hard tangles that make it difficult to resolve and they have a high chance of being damaged by lint, duct, and other debris in your pocket. This further leads to poor sound production. So, it is recommended to avoid pocket carriage. Conclusion As mentioned, a little care can provide long life to your headphones. So, follow these above-mentioned tips and keep your headphones safe and secure from getting damaged. After all, these devices are the main source of entertainment that you definitely do not want to lose. Whether you are going for a high-quality brand like sennheiser headsets or normal, it is important to protect them in every possible way.