1 / 23

CCNA 2 v3.0 Module 1 WANs and Routers

CCNA 2 v3.0 Module 1 WANs and Routers. Objectives. WANs Routers. WAN. Introduction to WANs. A wide-area network (WAN) is a data communications network spanning a large geographic area such as a state, province, or country. WAN Devices. WAN Services. Data Link Encapsulations. Router.

floria
Download Presentation

CCNA 2 v3.0 Module 1 WANs and Routers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CCNA 2 v3.0 Module 1 WANs and Routers

  2. Objectives • WANs • Routers

  3. WAN

  4. Introduction to WANs • A wide-area network (WAN) is a data communications network spanning a large geographic area such as a state, province, or country.

  5. WAN Devices

  6. WAN Services

  7. Data Link Encapsulations

  8. Router

  9. Internal Configuration Components

  10. Routers Connected by WAN Technologies

  11. Network Layer Path Determination

  12. Academy Approach to Labs • In the academy lab, all the networks will be connected with serial or Ethernet cables and the students can see and physically touch all the equipment. • Devices that make up the WAN cloud are simulated by the connection between the back-to-back DTE-DCE cables.

  13. Router Internal Components

  14. Router Internal Components

  15. Internal Components of a 2600 Router

  16. External Connections on a 2600 Router

  17. Router External Connections

  18. Computer or Terminal Console Connection

  19. Modem Connection to Console or Auxiliary Port

  20. Connecting Console Interfaces • Configure terminal emulation software on the PC for the following: • The appropriate com port • 9600 baud • 8 data bits • 1 stop bit • No parity • No flow control • Connect a rollover cable to the router console port (RJ-45 connector). • Connect the other end of the rollover cable to the RJ-45 to DB-9 adapter • Attach the female DB-9 adapter to a PC.

  21. Connecting LAN Interfaces

  22. Router Serial WAN Connectors

  23. DCE Serial Connections

More Related